Tuning the temperature coefficient of resonant frequency for 8-layer twinned hexagonal perovskite Ba<Subscript>8</Subscript>ZnTa<Subscript>6</Subscript>O<Subscript>24</Subscript> ceramics

High-Q dielectric materials ilmenite MgTiO₃, columbite MgNb₂O₆ and cubic perovskite Ba₃NiTa₂O₉ with negative temperature coefficient of resonant frequency (τ _f ) were selected as candidates for compensating the τ _f of hexagonal perovskite Ba₈ZnTa₆O₂₄. X-ray diffraction data shows that Ba₈ZnTa₆O₂₄ coexists with Ba₃NiTa₂O₉ but is not compatible with MgTiO₃ and MgNb₂O₆ at high temperature. The τ _f for the mixed hexagonal/cubic perovskite Ba₈ZnTa₆O₂₄–Ba₃NiTa₂O₉ system is tunable via the temperature compensation effect and its quality factor may be improved via annealing the ceramics at high temperature to enhance the cation ordering in the cubic component. Permittivity ε _r  ~ 22–25, Q×f > 30,000 GHz and tunable τ _f within ±10 ppm/°C were achieved in the range of about 50–80 wt% Ba₃NiTa₂O₉ for the hexagonal/cubic perovskite composite Ba₈ZnTa₆O₂₄–Ba₃NiTa₂O₉ ceramics, which is suitable for the application as dielectric resonators and filters.     

坑道内爆炸冲击波相似律问题探讨

为研究坑道内爆炸冲击波相似律问题,进行了不同药量坑道堵口爆炸实验,并利用ANSYS/LSDYNA软件对原型坑道与模型坑道爆炸冲击波进行数值计算。结果表明:与自由大气中不同,同一坑道内不同药量爆炸产生的冲击波不符合爆炸相似律;若原型坑道与模型坑道几何相似,装药量之比为几何相似比的三次方,则原型坑道与模型坑道内爆炸冲击波符合爆炸相似律;坑道内爆炸冲击波数值模拟时,若原型坑道与模型坑道网格尺寸符合相应的几何相似比,则冲击波计算结果满足相似律,当坑道截面网格密度为1675~2977时可以达到计算精度要求。     

快/慢烤试验中复合推进剂内部温度场的分布

为了研究不同烤燃条件下复合推进剂(PBT/HMX/Al/AP/BU)的响应特性,采用DSC研究了复合推进剂及单组分的热分解特性。复合推进剂的初始分解温度为187.27℃,单组分中BU初始分解温度最低,为192.95℃,表明复合推进剂的热分解过程是从BU开始;分别测量了在快/慢烤试验中,复合推进剂内部温度的变化。结果表明:1)快烤试验中,样品内部温度分布极不均匀。点火90 s后,样品发生反应,此时样品中心的温度为85℃,钢管端盖破裂,样品发生燃烧反应。2)慢烤试验中,样品内部温度分布均匀,几乎无温度差,样品发生反应时,样品内部温度与环境温度均为133℃,试验后样品钢管完全破碎,样品发生了爆轰。由此可见,慢烤试验中,由于样品内部温度分布均匀,发生反应时,大部分样品都处于临界反应温度,一旦激发,破坏效应比快烤试验更严重。     

电气石的环境功能属性及其复合功能材料应用研究

电气石是非金属矿物领域中较为重要的一类硅酸盐类矿物,属非可再生类天然矿物。电气石晶体具有化学成分复杂、晶形及颜色多样等特征。电气石晶体内部的物质及结构特征,使其具有压电性、热释电性、自发极化效应和释放负离子等特性。近年来,关于利用电气石的环境功能属性制备各类复合功能材料的研究已成为备受关注的热点。基于电气石的来源、分类、晶体内部物质成分与结构组成等,概述了电气石的理化结构特征及各环境功能属性,进而论述电气石及其复合功能材料在各个实际领域中的应用,归纳并总结电气石在现今环境污染治理应用当中存在的相关问题,最后对电气石及其复合功能材料的发展前景进行了展望。     

Contextual heat island assessment for pavement preservation

Pavement preservation (PP) is a planned set of construction and material interventions that can extend the pavement’s service life and may also impact sustainability through Heat Island (HI) mitigation. The HI mitigation potential can vary from location-to-location and with time. For agencies to widely adopt the PP, it is necessary to quantify the benefits based on the context of the project. A method to calculate the Global Warming Potential (GWP) for the HI effect was developed and illustrated for four cities in the US: Chicago, Austin, San Diego and Philadelphia, for hypothetical pavements with three preservation options: chip seals, a concrete inlay, and an asphalt concrete inlay. The use phase GWP with respect to HI was estimated for all cases given a 2-, 5-, 7- or 10-year service life. Overall, the HI in the use phase was found to dominate the total GWP relative to the materials and construction phases. The HI GWP savings increase over time, with the 10-year savings being greatest for San Diego using the concrete inlay (22.5?kg CO₂-eq/m²) and smallest for Chicago with a chip seal (8.0?kg CO₂-eq/m²). The savings were found to increase in areas that have a more pronounced HI and could offset GWP in the other phases. The proposed method allows agencies to estimate HI GWP for a specific preservation strategy, location and service life.     

理想条件下混合态量子系统的Lyapunov稳定化策略

在假定被控系统满足非退化、没有退化跃迁和完全连通的理想条件下,借助于带有附加自由度的Lyapunov函数研究了混合态量子系统的稳定化问题.基于LaSalle原理推导了闭环系统的最大不变集和任一初始态下的收敛状态集,给出了系统对最大不变集中任一平衡态渐近稳定化的自由度的构造原则.最后通过一个两能级系统的数值仿真,验证了所得理论结果的正确性.     

An experimental analysis of electrostatically vibrated array of polysilicon cantilevers

Micromechanical cantilevers are one of the most fundamental and widely studied structures in micro-electromechanical systems. Dynamic response of such cantilevers has long been an interesting subject to researchers and different analytical and experimental approaches have been reported to determine it. Theoretical estimation of different damping mechanisms have been reported over years which are relevant particularly in studying the dynamics of the micro-mechanical structures. Most properties and functionalities of the MEMS devices are invariably dependant on the dynamic response of the devices, which in turn depends on the quality factor of the devices or in other words the overall damping present in the system. This paper presents a thorough experimental analysis of vibration characteristics of micro-mechanical cantilevers of different dimensions. Arrays of polysilicon micro-cantilevers of different dimensions have been designed and fabricated using surface micromachining process. The beams are resonated by electrostatic actuation and their vibration characteristics have been observed using Laser Doppler Vibrometer. Also a thorough analysis of modal behaviour of the beams is presented using analytical approach and finite element method based simulation. Different damping mechanisms have been critically reviewed and a semi-analytical estimation of the overall damping is presented. The results are compared with experimental values.     

基于入侵检测技术和诱骗技术的网络安全

该文介绍了基于诱骗技术的网络入侵检测系统(IDS),它是传统入侵检测系统的延伸。首先讨论了基于网络的入侵检测系统,然后分析了入侵诱骗技术和Honeypot技术,最后讨论了基于诱骗技术的入侵检测系统的设计和实现,特别是重定向模块和诱骗网络的设计和实现。     

Laser‐irradiated zinc oxide thin‐film transistors fabricated by solution processing

Abstract— This study investigates the effects of subjecting zinc oxide (ZnO) thin films to laser irradiation. The optical, structural, and electrical properties of the as‐deposited and laser‐irradiated films at different laser energies were studied. The transmittances without/with laser irradiation showed a net increase from 85 to 92% (@550 nm) for 250‐nm ZnO films, indicating an improvement in sample crystal linity. In addition, laser treatment decreased the ZnO band gap. Composition structure analysis shows that the crystallinity increased when the laser energy increased. Thin‐film transistors (TFTs) with a ZnO active layer were fabricated. The mobility of as‐deposited ZnO TFT devices (0.19 cm²/V‐sec) increased more than 2.5 times for ZnO of unirradiated laser treatment (0.49 cm²/V‐sec).