Preparation of Titanium Nitride/Alumina Laminate Composites

A preparation route for TiN/Al₂O₃ laminate composites has been described. A water-based process using Al₂O₃ and TiN slurries with solids contents of 40 and 35 vol%, respectively, was used to make TiN and Al₂O₃ tapes. The removal of the binder was monitored by weight-loss measurements in a thermogravimetry unit. Bodies composed of Al₂O₃ and TiN tapes were densified at temperatures of 1400° and 1500°C using the Spark Plasma Sintering^® (SPS) technique. Densities of >98% of the theoretical densities were approached. Crack-free and almost fully densified TiN/Al₂O₃ compacts were prepared by heating the burned-out green bodies to the final sintering temperature (1500°C) at a rate of 100°C/min, and with a holding time of 5–10 min, under a pressure of 75 MPa. The microstructures of the obtained compacts were studied using scanning electron microscopy. Grain sizes in the sintered Al₂O₃ and TiN compacts were similar to those of the precursor powders. Hardness and indentation fracture toughness were measured at room temperature, and the monolithic compacts as well as the laminate composites exhibited anisotropic mechanical behavior; i.e., the cracks propagated much more easily in a direction parallel to the laminas than perpendicular to them.     

Vibrational spectroscopic characterization of rigid rod polymers: 3. Microstructural changes in stressed polymers

Highly oriented poly(p-phenylene benzobisthiazole) films were stressed in a miniature hydraulic tensile tester interfaced to a fast scanning Fourier transform infra-red spectrometer. The changes in relative intensity, polarization, frequency and shape of infrared bands have been useful in the elucidation of microstructures. With the short time resolution achievable, vibrational bandshape and frequency have been shown to change at different rates when an external stress was applied.     

吊车断裂弹簧钢板的焊接修复

吊车上的板弹簧是一个很重要的零件,它在反复应力下工作,承受较大的冲击负荷和振动,要求其应具有较高的疲劳强度、抗拉强度等性能。由于板弹簧为碳含量较高的合金钢,焊接性差,修复断裂的板弹簧较困难。某公司的一台日本进口TL-252型25t吊车,在使用二年内先后发现五块弹簧钢板断裂,给现场施工带来了不便和一定的经济损失。经制定严格的工艺,对断裂板弹簧成功地进行了焊接修复,修复后使用效果很好。1板簧材料及可焊性分析断裂的弹簧钢板为日本钢号SUP6,相当于我国的60Si2Mn弹簧钢,其化学成份见表1。表1SUP6钢的化学成份(%)C Si Mn S P …     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

Tracking Configurable Culture From the Margins to the Mainstream

In this study, we analyze data from surveys conducted in 2006 and 2010, tracking changes in awareness, engagement and attitudes surrounding emerging digital cultural forms over this 5‐year period. Our analysis, based on results from thousands of adults around the globe, shows that not only have remixes, mashups and other forms of “configurable culture” become mainstream phenomena, but also that the attitudes surrounding their cultural legitimacy are shifting. While copyright industries still promote a binary theft/permission framework, many people acknowledge the validity of some appropriation, and are actively negotiating the law's limitations. Yet, those most engaged in challenging dominant copyright narratives and exploring these emergent forms are those who hold the reins of cultural power: the young, educated and wealthy.     

Flow shop batching and scheduling with sequence-dependent setup times

This paper addresses the flow shop batching and scheduling problem where sequence-dependent family setup times are present and the objective is to minimize makespan. We consider violating the group technology assumption by dividing product families into batches. In order to reduce setup times, inconsistent batches are formed on different machines, which lead to non-permutation schedules. To the best of our knowledge, this is the first time that the splitting of job families into inconsistent batches has been considered in a flow shop system. A tabu search algorithm is developed which contains several neighbourhood functions, double tabu lists and a multilevel diversification structure. Compared to the state-of-the-art meta-heuristics for this problem, the proposed tabu search algorithm achieves further improvement when the group scheduling assumption is dropped. Also, various experiments conducted on the benchmark problem instances confirm the benefits of batching. Therefore, it will be prudent for the practitioners to consider adopting inconsistent batches and non-permutation schedules to improve their operational efficiency within a reasonable amount of computational effort.     

Necrodols: Anti-insectan terpenes from defensive secretion of carrion beetle (Necrodes surinamensis)

Two compounds recently isolated from the defensive gland ofNecrodes surinamensis, -and -necrodol, first representatives of a new category of monoterpenes (the necrodanes), are shown to be repellent to ants and other insects and irritating to cockroaches and flies. The compounds doubtless play a defensive role inNecrodes. The possible long-range applied significance of research on insect repellents is discussed.Paper No. 80 of the seriesDefense Mechanisms of Arthropods. Paper No. 79 is T. Eisner et al., Experientia 42:204–207 (1986).     

Multi-secret visual cryptography with deterministic contrast

Multimedia Tools and Applications - The multi-secret visual cryptography scheme (MVCS) allows for the encryption of multiple secret images into a given image area. The previous works on MVCS with...     

Lightweight dynamic symmetry breaking

Symmetries in constraint problems present an opportunity for reducing search. This paper presents Lightweight Dynamic Symmetry Breaking, an automatic symmetry breaking method that is efficient enough to be used as a default, since it never yields a major slowdown while often giving major performance improvements. This is achieved by automatically exploiting certain kinds of symmetry that are common, can be compactly represented, easily and efficiently processed, automatically detected, and lead to large reductions in search. Moreover, the method is easy to implement and integrate in any constraint system. Experimental results show the method is competitive with the best symmetry breaking methods without risking poor performance.