Bulk free radical polymerizations of methyl methacrylateunder non-isothermal conditions and with intermediate additionof initiator: Experiments and modeling

Experimental data on the monomer conversion, x_m, and the weight average molecular weight, M_w, have been generated under several isothermal and non-isothermal conditions for the polymerization of methyl methacrylate in a rheometer-reactor assembly. The non-isothermal results, in particular, can be used to provide more stringent tests of kinetic models than isothermal data alone. A simple empirical model has been used to describe this system that accounts for the gel (Trommsdorff) and glass effects. The model involves only x_m and the temperature, and is quite general. The model parameters are tuned using only three sets of isothermal data. Good agreement is found between the experimental results and model predictions for a whole variety of experimental conditions, including non-isothermal operation and with intermediate addition of initiator. Because of its generality, this model is quite suitable for use for on-line optimizing control as well as for describing industrial reactors.     

Ozone Contactor Hydrodynamics

Tracer tests were conducted at the 6,000 pounds of ozone per day Tucson, CAP Water Treatment Plant in Tucson, Arizona. The tests were designed to determine T₁₀ values through the contactors at various operating conditions. The tests were modeled using three techniques. Peclet Number was calculated for each of the runs, which would indicate the hydrodynamic conditions inside the ozone contactor. The results indicated that the increase in water flow rate and the number of cells with gas flow increased Peclet Number. The flow rate of liquid seemed to impact the Peclet Number more than gas flow. The headloss in each cell appeared to be important in controlling the distribution of liquid and gas through the cell. A correlation was developed between the product of gas and liquid phase Reynolds Number and Peclet Number.     

Effect of coupling agents on thermal and electrical properties of mica/epoxy composites

The influence of 3-aminopropyltriethoxysilane, 3-glycidyloxypropyltrimethoxysilane, and neoalkoxytric(dioctyl pyrophosphato)zirconate on thermal expansion behavior, dielectric strength, and arc resistance of mica/epoxy composites has been investigated. The addition of mica up to 30% resulted in the reduction of thermal expansion with respect to neat resin. However, the coefficient of linear thermal expansion of 30% mica treated with aminosilane was the least among the various coupling agent-coated filler/epoxy composites. Mica (30%)/epoxy composites showed the highest dielectric strength values (26 kV/mm), but the highest arc resistance was obtained in zirconate-treated mica (30%)/epoxy composite. © 1995 John Wiley & Sons, Inc.     

Automatic learners with feedback queries

Automatic classes are classes of languages for which a finite automaton can decide whether a given element is in a set given by its index. The present work studies the learnability of automatic families by automatic learners which, in each round, output a hypothesis and update a long-term memory, depending on the input datum, via an automatic function. Many variants of automatic learners are investigated: where the long-term memory is restricted to be the current hypothesis whenever this exists, cannot be of length larger than the length of the longest datum seen, or has to consist of a constant number of examples seen so far. Learnability is also studied with respect to queries which reveal information about past data or past computation history; the number of queries per round is bounded by a constant.     

EGIS'92

Announcement

EGIS'92 Third European Conference on Geographical Information Systems at the Park Hilton in Munich Germany, March 23–26, 1992     

Fusion of smartphone sensor data for classification of daily user activities

Multimedia Tools and Applications - New mobile applications need to estimate user activities by using sensor data provided by smart wearable devices and deliver context-aware solutions to users...     

Entropy based spatial domain image watermarking and its performance analysis

Digital image watermarking technique based on LSB Substitution and Hill Cipher is presented and examined in this paper. For better imperceptibility watermark is inserted in the spatial domain. Further the watermark is implanted in the Cover Image block having the highest entropy value. To improve the security of the watermark hill cipher encryption is used. Both subjective and objective image quality assessment technique has been used to evaluate the imperceptibility of the proposed scheme.Further, the perceptual perfection of the watermarked pictures accomplished in the proposed framework has been contrasted and some state-of-art watermarking strategies. Test results demonstrates that the displayed method is robust against different image processing attacks like Salt and Peppers, Gaussian filter attack, Median filter attacks, etc.

     

Isolation and characterization of cellulose nanowhiskers from Acacia caesia plant

Acacia caesia (L.) Willd (soap bark) fiber is an abundant natural resource, that is rich in cellulose. The study reports the effective utilization of underutilized Acacia caesia fiber for the isolation of nanocellulose whiskers. The nanocellulose whiskers were isolated successfully from Acacia caesia fibers by following alkali, bleaching, and sulfuric acid treatment. The obtained nanocellulose whiskers were carefully investigated for its chemical composition, structure, morphology, crystallinity, and thermal stability. The chemical composition and Fourier transform infrared spectra of nanocellulose whiskers showed the elimination of the non-cellulosic parts present in the raw Acacia caesia fibers. The X-ray diffraction analysis showed an upsurge in the crystallinity of the cellulose fibers after the chemical treatments. The isolation of nanocellulose whiskers from Acacia caesia raw fiber was confirmed by electron microscopy analysis. The thermogravimetric analysis showed remarkably high char residue for the nanocellulose whiskers compared to raw fibers. Based on the properties of nanocellulose whiskers, it can be concluded that the nanocellulose whiskers produced from Acacia caesia raw fibers are potential reinforcing material for developing high-performance green composites.     

Localized swelling of Fe-Cr-Ni alloy rollers in high-temperature applications

Localized swelling has been observed in 24Cr-24Ni-Nb steel transportation rollers used in the normalizing furnace of a plate mill after prolonged service at high temperature. Due to high localized thermal and mechanical stresses, the chromia layer formed on the roller surface ruptures, exposing the roller substrate to furnace oxygen. Oxidation of second-phase carbides results in the formation of carbon monoxide at very high partial pressure. This leads to formation of voids, leading in turn to localized swelling of the roller material.     

Dynamic effects during sinter forging of axi-symmetric hollow disc preforms

The present paper reports an investigation on the dynamic effects during sinter forging of axi-symmetric hollow disc preforms at room temperature. The preforms have been prepared by compacting the copper metal powder within the closed-cavity circular compaction dies and experiments have been conducted on computer-controlled hydraulic press to investigate the effect of die velocity, i.e. dynamic effects on various deformation characteristics, e.g. flow of material, densification during dry and lubricated interfacial friction conditions, bulging and strains at preform-free surfaces and die loads. The theoretical analysis for die pressure distribution, average die load and bulged profile by ‘upper bound’ approach has been presented. The identification of critical sinter-forging characteristics and their interrelationships are the cornerstones of present study. The effect of die velocity along with other deformation characteristics on die load and inertia energy dissipation has been investigated critically using ‘design of experiment’ technique and the important interactions have been displayed graphically using ‘response surface methodology’ technique. The study on dynamic effects revealed that die velocity is the most critical factor during sinter-forging operations, especially at higher die speeds and hence, inertia energy must be considered during its analysis. The experimental and theoretical results have been found in close agreement with each other and it is expected that the work will be highly useful for the assessment of various deformation characteristics during processing of sintered materials.