Anatase-rutile transformation in Fe/TiO2, Th/TiO2 and Cu/TiO2 catalysts and its possible role in metal-support interaction

Based onin-situ Mössbauer and X-ray diffraction studies, it is shown that in the Fe/TiO₂ catalyst, the anatase-rutile transformation of the TiO₂ support is facilitated by the Fe²⁺ ions formed during the reduction. The transformation occurs at lower temperatures in Th/TiO₂ and Cu/TiO₂ compared to pure TiO₂. In general, the transformation of anatase to rutile seems to occur at or below the temperature (770 K) at which strong-metal-support-interaction manifests itself.Contribution No. 718 from the Solid State and Structural Chemistry Unit.     

Dynamic rheological,morphology and mechanical properties of compatibilized LLDPE/EMA blends

Blends of linear low density polyethylene (LLDPE) and ethylene-co-methyl acrylate (EMA) having 60/40 composition was studied with and without compatibilizing agent. The compatibilizing agent used was maleic anhydride grafted linear low density polyethylene (LLDPE-g-MA). The LLDPE backbones of the compatibilizer are compatible with LLDPE blend component, whereas the maleic anhydride is affinated with carbonyl groups of EMA. The effectiveness of the compatibilizing agent was evaluated using different techniques like mechanical, thermal, scanning electron microscopy and rheological studies. Best compatibilization effect was found in the blend at a loading of 3 wt% of compatibilizer since at this level of compatibilizer complex viscosity, tensile strength, modulus, elongation at break, impact strength was found to be higher. The increase in the melt viscosity, storage modulus and thermal stability of the compatibilized blends indicated enhanced interactions between the discrete LLDPE and EMA phases induced by the functional compatibilizer.     

EFFECT OF OPERATING VARIABLES ON BED TO WALL HEAT TRANSFER IN A CIRCULATING FLUIDIZED BED

Heat transfer coefficients were measured for 227 and 87 micron size particles of silica sand in a 102 mm dia. and 5.5 m tall circulating fluidized bed made of plexiglass. Effects of solid circulation rate, fluidization velocity, bed density and particle sizes were studied. The heat transfer coefficients were calculated from the temperatures measured along the axis of a 25 mm dia 100 mm long cylindrical heat flux meter.     

Electrical Conduction in Nano-Structured La0.9Sr0.1Al0.85Co0.05Mg0.1O3 Perovskite Oxide

Nanocrystalline La_0.9Sr_0.1Al_0.85Co_0.05Mg_0.1O₃ oxide powder was synthesized by a citrate–nitrate auto-ignition process and characterized by thermal analysis, X-ray diffraction, and impedance spectroscopy measurements. Nanocrystalline (50–100 nm) powder with perovskite structure could be produced at 900°C by this process. The powder could be sintered to a density more than 96% of the theoretical density at 1550°C. Impedance measurements on the sintered samples unequivocally established the potential of this process in developing nanostructured lanthanum aluminate-based oxides. The sintered La_0.9Sr_0.1Al_0.85Co_0.05Mg_0.1O₃ sample exhibited a conductivity of 2.40 × 10⁻² S/cm in air at 1000°C compared with 4.9 × 10⁻³ S/cm exhibited by La_0.9Sr_0.1Al_0.85Mg_0.15O₃.     

Biomolecular Template-Induced Biomimetic Coating of Hydroxyapatite on an SS 316 L Substrate

Bone, a natural composite, comprises non-stoichiometric calcium hydroxyapatite (HAp) precipitated in a controlled reaction environment of a highly aligned, anisotropic organic template (type I collagen) that leads to its exotic tensile and compressive strength. It differs from stoichiometric hydroxyapatite in composition, crystallinity, and other physical and mechanical properties. In the present study, functionalized biomolecular template-induced precipitation of HAp on an SS 316 L substrate following biomimetic route exhibits distinct alterations in crystal growth and geometry, which in turn indicates the potential of the process to develop a non-stoichiometric HAp coating on metal implants.     

Processing and Properties of TiB2 with MoSi2 Sinter-additive: A First Report

The densification of non-oxide ceramics like titanium boride (TiB₂) has always been a major challenge. The use of metallic binders to obtain a high density in liquid phase-sintered borides is investigated and reported. However, a non-metallic sintering additive needs to be used to obtain dense borides for high-temperature applications. This contribution, for the first time, reports the sintering, microstructure, and properties of TiB₂ materials densified using a MoSi₂ sinter-additive. The densification experiments were carried out using a hot-pressing and pressureless sintering route. The binderless densification of monolithic TiB₂ to 98% theoretical density with 2–5 μm grain size was achieved by hot pressing at 1800°C for 1 h in vacuum. The addition of 10–20 wt% MoSi₂ enables us to achieve 97%–99%ρ_th in the composites at 1700°C under similar hot-pressing conditions. The densification mechanism is dominated by liquid-phase sintering in the presence of TiSi₂. In the pressureless sintering route, a maximum of 90%ρ_th is achieved after sintering at 1900°C for 2 h in an (Ar+H₂) atmosphere. The hot-pressed TiB₂–10 wt% MoSi₂ composites exhibit high Vickers hardness (∼26–27 GPa) and modest indentation toughness (∼4–5 MPa·m^1/2).     

Potentiality of Indian pineapple leaf fiber for apparels

The use of textile-grade fiber extracted from the Indian pineapple leaf is an unexplored area. Pineapple leaf fiber (PALF) is fine, soft, and moderately strong and is much acceptable for fashion garment. An attempt has been made to extract and soften Indian PALF from the pineapple leaves by decortication and subsequent water retting. Decorticated cum retted fiber has shown better physicomechanical and surface appearance properties than decorticated fiber. Fine yarn (38 tex) was spun in a suitable spinning system, and the property performance was found to be suitable to make eco-sustainable novelty fabric. Fabric was developed by using cotton as warp yarn and PALF-based yarn as weft in a handloom. The developed fabric shows very good physical and mechanical properties, desired for apparels. This inferred that Indian PALF may be successfully used to make eco-niche apparel quality fabric as well as novelty textiles.     

Performance analysis of tool electrode prepared through laser sintering process during electrical discharge machining of titanium

The International Journal of Advanced Manufacturing Technology - It is of great significance for intelligent manufacturing to study condition monitoring and diagnosis methods to realize early...     

Theoretical and Experimental Insight into the Mechanism for Spontaneous Vertical Growth of ReS2 Nanosheets

Rhenium disulfide (ReS₂) differs fundamentally from other group‐VI transition metal dichalcogenides (TMDs) due to its low structural symmetry, which results in its optical and electrical anisotropy. Although vertical growth is observed in some TMDs under special growth conditions, vertical growth in ReS₂ is very different in that it is highly spontaneous and substrate‐independent. In this study, the mechanism that underpins the thermodynamically favorable vertical growth mode of ReS₂ is uncovered. It is found that the governing mechanism for ReS₂ growth involves two distinct stages. In the first stage, ReS₂ grows parallel to the growth substrate, consistent with conventional TMD growth. However, subsequent vertical growth is nucleated at points on the lattice where Re atoms are “pinched” together. At such sites, an additional Re atom binds with the cluster of pinched Re atoms, leaving an under‐coordinated S atom protruding out of the ReS₂ plane. This under‐coordinated S is “reactive” and binds to free Re and S atoms, initiating growth in a direction perpendicular to the ReS₂ surface. The utility of such vertical ReS₂ arrays in applications where high surface‐to‐volume ratio and electric‐field enhancement are essential, such as surface enhanced Raman spectroscopy, field emission, and solar‐based disinfection of bacteria, is demonstrated.     

Improved harmonic suppression efficiency of single-phase APFs in distorted distribution systems

In this study, a control method is proposed to improve the harmonic suppression efficiency of the single-phase active power filter in a distorted power system to suppress current harmonics and reactive power. The proposed method uses the self-tuning filter (STF) algorithm to process single-phase grid voltage in order to provide a uniform reference grid current, which increases the efficiency of the system. The results of the simulation study are presented to verify the effectiveness of the proposed control technique in this study.