Reconstruction Based Recognition of Scenes with Multiple Repeated Components

This paper proposes an invariance based recognition scheme for scenes with multiple repeated components. The scheme considers three component subsets which characterize the scene completely. Each such three component subset is reconstructed using single image based information. We have developed a mathematical framework for the projective reconstruction based on relative affine structure of each such three component building block. This is extended to the case when each of the components is a quadric. A set of projective invariants of three quadrics has also been obtained by us. Although the reconstruction scheme is general and applicable to all multiple repeated components, it requires the computation of infinite homography. The infinite homography and hence the reconstruction scheme are only image computable with the given information in the case of translational repetition. We therefore develop a recognition strategy for the specific case of translationally repeated quadrics. As a recognition strategy for scenes with multiple translationally repeated quadric components, we propose to compute and store invariant values for each such three component subsets. Experiments on real data have shown the applicability of this approach for recognition of aerial images of power plants. The discriminatory power of the invariants and the stability of the recognition results have also been experimentally demonstrated.     

Structural features of evaporated nickel films on oxide supports

Nickel was vacuum-deposited at high temperature (1000–1600°C) on alumina and at room temperature on Hiflosupercel (diatomaceous earth). Light microscopy/Scanning electron microscopy/Energy Dispersive x-ray analysis investigations on the coated materials indicate structural features such as uniform dispersal and firm binding of nickel crystallites on the oxide surfaces and suggests that the feasibility of vacuum technology may offer certain advantages over the conventional processes for making dispersed metal catalysts.     

Effect of powder treatment on the crystallization behaviour and phase evolution of Al2O3–High ZrO2 nanocomposites

Al₂O₃–ZrO₂ composites containing nominally equal volume fraction of Al₂O₃ and ZrO₂ have been synthesized through combined gel-precipitation technique. Subsequently the gels were subjected to three different post gel processing treatments like ultrasonication, ultrasonication followed by water washing and ultrasonication followed by alcohol washing. It was observed that while in unwashed samples crystallization took place at low temperature, crystallization was delayed in the washed gels. The phase transition of ZrO₂ in the calcined gels followed the sequence; amorphous → cubic ZrO₂ → tetragonal ZrO₂ → monoclinic ZrO₂. On the other hand, phase transition in alumina followed the sequence amorphous to γ-Al₂O₃, the transition taking place at 650 °C. No α-Al₂O₃ could be detected even after calcination at 950 °C. However, all the sintered samples had α-Al₂O₃. In spite of high linear shrinkage (19–21%) during sintering, the sintered sample had density of only above 70% for all the four varieties of the powders. However, in spite of the low sintered density of the pellets, 31% tetragonal zirconia could be retained after sintering at 1400 °C and it reduced to about 16% at 1600 °C.     

Job scheduling in mesh multicomputers

A new approach for dynamic job scheduling in mesh-connected multiprocessor systems, which supports a multiuser environment, is proposed in this paper. Our approach combines a submesh reservation policy with a priority-based scheduling policy to obtain high performance in terms of high throughput, high utilization, and low turn-around times for jobs. This high performance is achieved at the expense of scheduling jobs in a strictly fair, FCFS fashion; in fact, the algorithm is parameterized to allow trade-offs between performance and (short-term) POPS fairness. The proposed scheduler can be used with any submesh allocation policy. A fast and efficient implementation of the proposed scheduler has also been presented. The performance of the proposed scheme has been compared with the FCFS policy, the only existing scheduling strategy for meshes, to demonstrate the effectiveness of the proposed approach. Simulation results indicate that our scheduling strategy outperforms the FCFS policy significantly. Specifically, our strategy significantly reduces the average waiting delay of jobs over the FCFS policy. The fast implementation of the proposed scheduler results in low allocation and deallocation time overhead, as well as low space overhead     

Effect of synthesis temperature on density and microstructure of MgB2 superconductor at ambient pressure

The experimental thermodynamic of MgB₂ synthesis process and phase compositions have been investigated by diffraction thermal analysis (DTA) technology and X-ray diffraction. The fabrication of MgB₂ bulks and superconducting properties at the temperatures range from 600 to 800°C were reported. And microstructure of MgB₂ bulks were observed by scanning electron microscope (SEM). A method was developed to determine the porosity of MgB₂ and the highest density can be obtained in MgB₂ prepared at 650°C at ambient pressure. It is found that the vapor pressure of Mg increases remarkably at high temperature, leading to the high porosity in MgB₂ samples. MgB₂ bulk with good superconducting property and fine microstructure was synthesized at 750°C.     

Cytochrome P450 inhibitory potential of selected Indian spices — possible food drug interaction

Spices constitute an important group of food which is virtually indispensable in the culinary art. In a view, these spices feared to pose a probability to affect the disposition of conventional pharmaceuticals through inhibition of human cytochrome P450 (CYPs) enzymes. In the present study an approach has been made to evaluate the possible CYP inhibition potential with some Indian spices (Capsicum annuum, Murraya koenigii, Zingiber officinale) and their major bioactive compounds, in combination with pooled microsome; as well as commercially available recombinant human CYP3A4, CYP2D6, CYP2C9 and CYP1A2. Quantification of the bioactive compound was determined through RP-HPLC, in order to standardize the plant material. CYP–carbon monoxide (CYP–CO) complex assay result indicated that all the plants and their bioactive compounds have an interaction potential with CYPs. Fluoregenic assay results indicated that the spice extracts have higher inhibition potential comparing to their single bioactive molecule. The higher enzyme inhibition potential by the extracts may be related to the synergistic effects due to the presence of other constituents in the extract. Capsaicin and C. annuum showed the lowest IC₅₀ value and 6-gingerol and Z. officinale extract showed the highest IC₅₀ value among the entire sample tested. The entire sample showed significantly less (P < 0.001, P < 0.01) interaction potential than known inhibitors. These findings indicate that selected spices are unlikely to cause clinically relevant drug interactions involving the inhibition of major CYP isozymes.     

Effect of Temperature on Hydraulic Parameters of Cable-In-Conduit-Conductor of SST-1

Stable operation of superconducting magnets depend critically on the balance of heat deposition rate versus heat extraction rate by the cryo-coolant. Thus, the mass flow rate of the coolant in case of force-flow cooled superconducting magnet with Cable-In-Co-nduit-Conductor (CICC) construction becomes an important factor for optimum stability of magnets. The Toroidal and Poloidal Field magnets of Steady-state Superconducting Tokamak-1 (SST-1) is made of superconducting CICC with a void fraction of 40 %±2 %. For adequate cooling of magnets, supercritical helium at 4 bar and 4.5 K is forced-flown through the voids. Effect of temperature on mass flow rate and pressure drop in SST-1 CICC is studied in a 7 m long piece wound helically. The experimental friction factor of the CICC is also measured at different temperatures and flow rates and is compared with the standard Katheder equation and Tada equation. Also, based on the new findings obtained from the experimental results, the dimensionless Reynolds number has been slightly modified. This new number is used to propose a modified Katheder correlation for the friction factor in CICCs similar to that of SST-1.     

Application of thermophilic temperatures,low hydraulic retention times and high recycling of de-gassed effluent for higher biohydrogen production

This study investigated the external operational factors that would reduce the thermodynamic constrains preventing the simultaneous achievement of high hydrogen productivities (HPs) and hydrogen yields (HYs) in the bioreactor. At hydraulic retention time (HRT) of 1, the maximum HPs and HYs achieved was 35 L H₂/h and 3.91 mol H₂/mol glucose, respectively. At this stage, the bacterial granules occupied approximately 75% of the bioreactor and consisted of the settled biomass density of 40.6 g/L (settled granule bed height = 13.8 cm). The formation of bacterial granules improved the bioreactor performance and resulted in higher substrate conversion efficiency (95%), nutrient influent (7.5 L/h) and de-gassed effluent recycle rates (3.5 L/min). In conclusion, this study demonstrated that high nutrient influent and high de-gassed effluent recycle rates reduced the thermodynamic constrains preventing the achievement of higher H₂ productivities in the bioreactor system.     

Studies of dielectric and electrical properties of a new type of complex tungsten bronze electroceramics

A polycrystalline ceramic with a new type of complex tungsten-bronze type structure, having a general formula K₂Ba₂Nd₂Ti₄Nb₄W₂O₃₀ has been prepared using a high temperature solid-state reaction route after optimizing the calcinations conditions on the basis of thermal analysis results. The material has been characterized by different experimental techniques. The formation of the compound has been confirmed using X-ray diffraction analysis. Dielectric properties (ε_r and tanδ) of the compound as a function of temperature at different frequencies have been carried out. Temperature dependence of dielectric constant indicates the presence of ferroelectric phase transition well above the room temperature. Complex impedance spectroscopic analysis has been carried out as a function of frequency at different temperatures to establish some correlation between the microstructure and electrical properties of the material. The nature of frequency dependence of ac conductivity obeys the Jonscher’s power law. The dc conductivity calculated from the ac conductivity spectrum shows the negative temperature coefficient of resistance behavior like a semiconductor.     

Influence of iron deficiency on electric and magnetic behavior of Ho doped BiFeO3 electroceramic

The effect of iron deficiency for the improvement of multiferroic properties of Ho doped BiFeO₃ ceramics (BiHo_XFe_1?XO₃ for x = 0, 0.05, 0.1 and 0.15) prepared by conventional solid state reaction route were investigated carefully. As pure BiFeO₃ exhibited antiferromagnetism, lossy ferroelectric (P–E) hysteresis loop and low dielectric constant value so, device integration is significantly hindered due to the presence of impurity phases associated with it. However, suitable variation of metal ion concentration in Ho doped BiFeO₃ significantly enhanced both ferroelectric and ferromagnetic properties of the samples. Therefore, increase of Ho concentration certainly favors for suppression of impurity phases in rhombohedral (R3c) structure of BiFeO₃ along with no structural transformation. On the other hand, increase of iron deficiency may suppress transformation of Fe from Fe³⁺ to Fe²⁺ as a result, the dielectric constant value of the sample increases along with large reduction of leakage current behavior.