Pilot-aided chip-interleaved DS-CDMA transmission over time-varying channels

Time-varying multipath fading associated with the wireless link limits the capacity of a wireless system. In order to adapt to this adverse radio environment efficiently, we investigate the use of a pilot-aided fade-resistant transmission scheme for the uplink of a chip-interleaved code-division multiple-access (CDMA) system. We analyze the tradeoff between the number of diversity branches and the channel estimation error. We derive the optimum ratio of pilot signal energy to information signal energy. Our numerical study indicates that the proposed system is capable of outperforming the conventional CDMA system depending on the transmitter energy and channel condition.     

Heterogeneous photocatalyzed degradation of uracil and 5-bromouracil in aqueous suspensions of titanium dioxide

Photocatalyzed degradation of uracil (1) and 5-bromouracil (2) has been investigated in aqueous suspensions of titanium dioxide under a variety of conditions. The degradation was studied by monitoring the change in substrate concentration employing UV spectroscopic analysis technique and depletion in total organic carbon (TOC) content as a function of irradiation time. The degradation of the compounds under investigation was studied using various parameters such as, different types of TiO2 powders, pH, catalyst concentration, substrate concentrations, and in the presence of electron acceptors like hydrogen peroxide (H(2)O(2)) and potassium bromate (KBrO(3)) besides molecular oxygen. Photocatalyst Degussa P25 was found to be more efficient for the degradation of both compounds as compared with other TiO2 powders such as UV100, PC500 and TTP.     

A New Approach Using Palm Olein,Palm Kernel Oil,and Palm Fatty Acid Distillate as Alternative Biolubricants: Improving Tribology in Metal-on-Metal Contact

Metal-on-metal (MoM) hip replacements are commonly used hip implants. However, one of the issues under debate is the interference of friction and wear. The purpose of this feasibility study is to elucidate the performance of palm lubrication between the femoral head and the acetabular cup. In the tribology of hip implants, the use of palm olein, palm kernel oil, and palm fatty acid distillate as synthetic lubricants for human joints has shown tremendous potential. A modified pin-on-disc as hip screening has been used to evaluate the friction and wear on an acetabular cup with an inner diameter of 28 mm. The wear debris was then observed with microscopy image analysis. This study revealed that the physical and unique chemical properties in palm oil can optimize the rate of friction and wear on the metal acetabular cup and thus allow for a stable implant of MoM.     

Regulation of Proteolytic Activity to Improve the Recovery of Macrobrachium rosenbergii Nodavirus Capsid Protein

The causative agent of white tail disease (WTD) in the giant freshwater prawn is Macrobrachium rosenbergii nodavirus (MrNV). The recombinant capsid protein (CP) of MrNV was previously expressed in Escherichia coli, and it self-assembled into icosahedral virus-like particles (VLPs) with a diameter of approximately 30 nm. Extensive studies on the MrNV CP VLPs have attracted widespread attention in their potential applications as biological nano-containers for targeted drug delivery and antigen display scaffolds for vaccine developments. Despite their advantageous features, the recombinant MrNV CP VLPs produced in E. coli are seriously affected by protease degradations, which significantly affect the yield and stability of the VLPs. Therefore, the aim of this study is to enhance the stability of MrNV CP by modulating the protease degradation activity. Edman degradation amino acid sequencing revealed that the proteolytic cleavage occurred at arginine 26 of the MrNV CP. The potential proteases responsible for the degradation were predicted in silico using the Peptidecutter, Expasy. To circumvent proteolysis, specific protease inhibitors (PMSF, AEBSF and E-64) were tested to reduce the degradation rates. Modulation of proteolytic activity demonstrated that a cysteine protease was responsible for the MrNV CP degradation. The addition of E-64, a cysteine protease inhibitor, remarkably improved the yield of MrNV CP by 2.3-fold compared to the control. This innovative approach generates an economical method to improve the scalability of MrNV CP VLPs using individual protease inhibitors, enabling the protein to retain their structural integrity and stability for prominent downstream applications including drug delivery and vaccine development.     

Investigation of dimensionless parameters and geometry effects on heat‐transfer characteristics of liquid sodium flowing over a flat plate

To improve the cooling performance of a nuclear fuel element, it is important to appraise the effect of dimensionless parameters and the geometry on heat‐transfer characteristic of sodium flowing over a nuclear fuel element. To fulfill this objective, the effects of geometry, Reynolds number (Re_H), conductivity ratio ( N _cc ), and dimensionless total heat generation parameter ( Q_t) on a two‐dimensional steady flow of liquid coolant flowing over a nuclear fuel element are studied. For this purpose, the stream function‐vorticity formulation method is applied. Full Navier Stokes equations and energy equation for the fluid domain are solved concurrently with conduction equation of fuel element applying finite difference scheme. The pseudotransient form of the vorticity transport and energy equations is solved using the alternating direction implicit method. A line‐by‐line technique is used for other discretized equations. Isotherms are also plotted and studied in detail. From the obtained results it can be concluded that for fixed values of aspect ratio and Re _H there exists a critical value of Q_t and N _cc beyond and below which peak temperature in the fuel element surpasses its tolerable limit. The results can also be applied to minimize the peak temperature in the nuclear fuel element (hot spots).     

Novel toughened polylactic acid nanocomposite: Mechanical,thermal and morphological properties

The objective of the study is to develop a novel toughened polylactic acid (PLA) nanocomposite. The effects of linear low density polyethylene (LLDPE) and organophilic modified montmorillonite (MMT) on mechanical, thermal and morphological properties of PLA were investigated. LLDPE toughened PLA nanocomposites consisting of PLA/LLDPE blends, of composition 100/0 and 90/10 with MMT content of 2 phr and 4 phr were prepared. The Young’s and flexural modulus improved with increasing content of MMT indicating that MMT is effective in increasing stiffness of LLDPE toughened PLA nanocomposite even at low content. LLDPE improved the impact strength of PLA nanocomposites with a sacrifice of tensile and flexural strength. The tensile and flexural strength also decreased with increasing content of MMT in PLA/LLDPE nanocomposites. The impact strength and elongation at break of LLDPE toughened PLA nanocomposites also declined steadily with increasing loadings of MMT. The crystallization temperature and glass transition temperature dropped gradually while the thermal stability of PLA improved with addition of MMT in PLA/LLDPE nanocomposites. The storage modulus of PLA/LLDPE nanocomposites below glass transition temperature increased with increasing content of MMT. X-ray diffraction and transmission electron microscope studies revealed that an intercalated LLDPE toughened PLA nanocomposite was successfully prepared at 2 phr MMT content.     

Effects of Degumming and Bleaching on 3-MCPD Esters Formation During Physical Refining

Crude palm oil (CPO) was physically refined in a 200-kg batch pilot refining plant. A study of the possible role of degumming and bleaching steps in the refining process for a possible critical role in the formation of 3-chloropropane-1,2-diol (3-MCPD) esters was evaluated. For the degumming step, different percentages of phosphoric acid (0.02–0.1%) as well as water degumming (2.0%) were carried out. Six different types of bleaching clays, mainly natural and acid activated clays were used for bleaching process at a fixed dose of 1.0%. Deodorization of the bleached oils was performed at 260 °C for 90 min. Analyses showed that 3-MCPD esters were not detected in the CPO. Phosphoric acid degumming (0.1%) in combination with acid activated clays produced the highest levels (3.89 ppm) of 3-MCPD esters in the refined (RBD) oil. The esters were at the lowest levels (0.25 ppm) when the oil was water degummed and bleached with natural bleaching clays. However, the refined oil qualities were slightly compromised. Good correlation of 0.9759 and 0.9351 was obtained when concentration of the esters was plotted against acidity of the bleaching earths for the respective acid and water degumming processes. The findings revealed the contribution of acidic conditions on the higher formation of 3-MCPD esters. In order to lower the esters formation, it is important to reduce acid dosage based on the crude oil qualities or to find alternatives to acid degumming process. Neutralization of the acidity prior to deodorization was effective in reducing the formation of 3-MCPD esters.     

Internationalization of higher education institutions: implementation of DMAIC cycle

In recent decades, the topic of internationalization has emerged as one of the defining issues of higher education globally. Different approaches are emerged for the internationalization process according to universities structures and strategic plans, however, universities are still facing the problems in identification of basic steps through which transformation of higher education to internationalization is possible. This study proposed a framework for higher education in Pakistan. In order to energize the whole process towards internationalization, three-step framework utilized for the internationalization of higher education in Pakistan. Study identifies the basic dimensions for the improvements of the services and structure, which leads to internationalization of higher education in Pakistan. Study proposed the use of define, measure, analysis, improve and control cycle for continuous improvements in higher education’s institutions in Pakistan.     

Toward software quality enhancement by Customer Knowledge Management in software companies

Customer Knowledge Management (CKM) plays an important role in the production of high quality software products. As CKM in Enterprise Software (ES) development is still immature, this raises questions on how CKM enablers can be used to help ES development companies improve their software quality. In this study, Human, Organizational and Technological CKM enablers were identified from the literature. The weights of these factors were determined by experts from the ES development companies. Based on the most important factors, a theoretical model was developed. The proposed model was evaluated by distributing a survey questionnaire to decision-makers in ES development companies. The results showed that “Customer Involvement” together with “Trust” were the most influential factors, followed by “CRM Technology Infrastructure” and “Cross-Functional Cooperation”. In addition, there was no impact from “Organizational Training”, “Customer Knowledge Map”, and “CKM Strategy Development”. The results also revealed that the impact of CKM on software quality is significant. The proposed model in this study can be used as a guideline for the successful application of CKM in ES development companies to improve the software quality.