15 years of processing and dissemination of SPOT-VEGETATION products

Throughout the VEGETATION programme, the Flemish Institute for Technological Research (VITO) uninterruptedly hosted the prime user segment of both VEGETATION 1 and VEGETATION 2 multispectral instruments on board the Satellite Pour l’Observation de la Terre 4 (SPOT 4) and SPOT 5 satellites. Operational since the launch of SPOT 4 in March 1998, and foreseen to continue at least until the end of the SPOT 5 mission (anticipated in spring 2014), this user segment comprises a processing facility (PF), actively receiving, processing, correcting, archiving, and distributing the VEGETATION data and derived added-value products. First and foremost, the VEGETATION programme has been serving the needs of operational users – both institutional and commercial – requesting data in near-real time. However, scientific and educational users too benefited significantly, in particular from VEGETATION’s unique time series of the Earth’s land cover, and more specifically the vegetation cover. Over the years, the centralized archive houses processed data covering the equivalent of 11,000 times the Earth’s surface, and delivered more than 50 terapixels to around 10.000 users. As such, VEGETATION’s mission is a prime example of what Europe wants to achieve through the Global Monitoring for Environment and Security (GMES) initiative: truly operational services providing reliable and up-to-date information.

This article describes the processing facility, the way the data and products are archived, the different dissemination channels as well as the data policy adopted and the users served. One of the recent evolutions, the development of an entirely new product distribution facility (PDF), implemented as part of the Project for On-Board Autonomy – Vegetation (PROBA-V) user segment is discussed.     

Reactive Compatibilizer Precursors for LDPE/PA6 Blends, 4

Summary: The effectiveness of some thermoplastic elastomers grafted with maleic anhydride (MA) or with glycidyl methacrylate (GMA) as compatibilizer precursors (CPs) for blends of low density polyethylene (LDPE) with polyamide‐6 (PA) has been studied. The CPs were produced by grafting different amounts of MA or GMA onto a styrene‐block‐(ethylene‐co‐1‐butene)‐block‐styrene copolymer (SEBS) (KRATON G 1652), either in the melt or in solution. A commercially available SEBS‐g‐MA copolymer with 1.7 wt.‐% MA (KRATON FG 1901X) was also used. The effect of the MA concentration and of other characteristics of the SEBS‐g‐MA CPs was also studied. The specific interactions between the CPs and the blends components were investigated through characterizations of the binary LDPE/CP and PA/CP blends, in the whole composition range. It was demonstrated that the SEBS‐g‐GMA copolymers display poor compatibilizing effectiveness due to cross‐linking resulting from reactions of the epoxy rings of these CPs with both the amine and the carboxyl end groups of PA. On the contrary, the compatibilizing efficiency of the MA‐grafted elastomers, as revealed by the thermal properties and the morphology of the compatibilized blends, was shown to be excellent. The results of this study confirm that the anhydride functional groups possess considerably higher efficiency, for the reactive compatibilization of LDPE/PA blends, than those of the ethylene‐acrylic acid and ethylene‐glycidyl methacrylate copolymers investigated in previous works.

SEM micrograph of the 75/25 LD08/PA blend (with 2 phr SEBSMA1).     

ASSESSMENT OF RED BLOOD CELL DEFORMABILITY BY CENTRIFUGAL SEDIMENTATION

A centrifugal sedimentation method (CSM) is proposed for the assessment of deformability of red blood cells. The method is based on the premise that a red blood cell (RBC) should deform in a centrifugal field due to the variation of the centrifugal acceleration with the distance from the center of rotation. This change in shape of the RBC leads to a change in the rate of sedimentation in the centrifugal field. The rate of sedimentation, which serves as a measure of deformability, is characterized by an apparent sedimentation coefficient (ASC) and its normalized value (NASC), which is calculated by comparison with a control group of normal RBCs. It has been shown that the NASC is sensitive to the speed of rotation, to treatments with glutaraldehyde, diamide, or chlorpromazine, to heat treatment and to osmotic pressure variations.     

An ensemble evolutionary constraint-based approach to understand the emergence of metabolic phenotypes

Constraint-based modeling is largely used in computational studies of metabolism. We propose here a novel approach that aims to identify ensembles of flux distributions that comply with one or more target phenotype(s). The methodology has been tested on a small-scale model of yeast energy metabolism. The target phenotypes describe the differential pattern of ethanol production and O₂ consumption observed in “Crabtree-positive” and “Crabtree-negative” yeasts in changing environment (i.e., when the upper limit of glucose uptake is varied). The ensembles were obtained either by selection among sampled flux distributions or by means of a search heuristic (genetic algorithm). The former approach provided indication about the probability to observe a given phenotype, but the resulting ensembles could not be unambiguously partitioned into “Crabtree-positive” and “Crabtree-negative” clusters. On the contrary well-separated clusters were obtained with the latter method. The cluster analysis further allowed identification of distinct groups within each target phenotype. The method may thus prove useful in characterizing the design principles underlying metabolic plasticity arising from evolving physio-pathological or developmental constraints.     

Comparing the Performance of Organic Solvent Nanofiltration Membranes in Non-Polar Solvents

Organic solvent nanofiltration (OSN) is gradually expanding from academic research to industrial implementation. The need for membranes with low and sharp molecular weight cutoffs that are able to operate under aggressive OSN conditions is increasing. However, the lack of comparable and uniform performance data frustrates the screening and membrane selection for processes. Here, a collaboration is presented between several academic and industrial partners analyzing the separation performance of 10 different membranes using three model process mixtures. Membrane materials range from classic polymeric and thin film composites (TFCs) to hybrid ceramic types. The model solutions were chosen to mimic cases relevant to today's industrial use: relatively low molar mass solutes (330–550 Da) in n-heptane, toluene, and anisole.     

Importance of Mullins effect in commercial silicone elastomer formulations for soft robotics

Silicone elastomers are used in a wide range of applications, including artificial muscles, biomedical devices, and soft robotics, for which chemical, thermal, and mechanical stability are important requirements that these elastomers must fulfill. However, to ensure that silicone elastomers' properties and performance remain constant under long-term deployment, it is necessary to examine and account for the Mullins effect, which has the potential to significantly alter certain elastomer properties of interest. In this article, the mechanical properties of soft and hard commercial silicone elastomers and two blends of commercial silicone elastomers are investigated—specifically their softening behavior due to the Mullins effect. Ultimate stresses, ultimate strains, and Young's moduli are obtained from uniaxial tensile tests. Results show that the point of softening greatly depends on both the elastomer type and its strain history. Furthermore, a significant permanent set is observed in the softest commercial formulations.     

An integrated semantic-based approach in concept based video retrieval

Multimedia content has been growing quickly and video retrieval is regarded as one of the most famous issues in multimedia research. In order to retrieve a desirable video, users express their needs in terms of queries. Queries can be on object, motion, texture, color, audio, etc. Low-level representations of video are different from the higher level concepts which a user associates with video. Therefore, query based on semantics is more realistic and tangible for end user. Comprehending the semantics of query has opened a new insight in video retrieval and bridging the semantic gap. However, the problem is that the video needs to be manually annotated in order to support queries expressed in terms of semantic concepts. Annotating semantic concepts which appear in video shots is a challenging and time-consuming task. Moreover, it is not possible to provide annotation for every concept in the real world. In this study, an integrated semantic-based approach for similarity computation is proposed with respect to enhance the retrieval effectiveness in concept-based video retrieval. The proposed method is based on the integration of knowledge-based and corpus-based semantic word similarity measures in order to retrieve video shots for concepts whose annotations are not available for the system. The TRECVID 2005 dataset is used for evaluation purpose, and the results of applying proposed method are then compared against the individual knowledge-based and corpus-based semantic word similarity measures which were utilized in previous studies in the same domain. The superiority of integrated similarity method is shown and evaluated in terms of Mean Average Precision (MAP).     

Tough Transient Ionic Junctions Printed with Ionic Microgels

Emerging soft ionotronics better match the human body mechanically and electrically compared to conventional rigid electronics. They hold great potential for human-machine interfaces, wearable and implantable devices, and soft machines. Among various ionotronic devices, ionic junctions play critical roles in rectifying currents as electrical p–n junctions. Existing ionic junctions, however, are limited in electrical and mechanical performance, and are difficult to fabricate and degrade. Herein, the design, fabrication, and characterization of tough transient ionic junctions fabricated via 3D ionic microgel printing is reported. The 3D printing method demonstrates excellent printability and allows one to fabricate ionic junctions of various configurations with high fidelity. By combining ionic microgels, degradable networks, and highly charged biopolymers, the ionic junctions feature high stretchability (stretch limit 27), high fracture energy (>1000 Jm⁻²), excellent electrical performance (current rectification ratio >100), and transient stability (degrade in 1 week). A variety of ionotronic devices, including ionic diodes, ionic bipolar junction transistors, ionic full-wave rectifiers, and ionic touchpads are further demonstrated. This study merges ionotronics, 3D printing, and degradable hydrogels, and will motivate the future development of high-performance transient ionotronics.