High Precision,Electrochemical Detection of Reversible Binding of Recombinant Proteins on Wide Bandgap GaN Electrodes Functionalized with Biomembrane Models

We report a novel hybrid charge sensor realized by the deposition of phospholipid monolayers on highly doped n‐GaN electrodes. To detect the binding of recombinant proteins with histidine‐tags, lipid vesicles containing chelator lipids were deposited on GaN electrodes pre‐coated with octadecyltrimethoxysilane monolayers. Owing to its optical transparency, GaN allows the confirmation of the fluidity of supported membranes by fluorescence recovery after photo‐bleaching (FRAP). The electrolyte‐(organic) insulator‐semiconductor (EIS) setup enables one to transduce variations in the surface charge density ΔQ into a change in the interface capacitance ΔC _p and, thus, the flat‐band potential ΔU _FB. The obtained results demonstrate that the membrane‐based charge sensor can reach a high sensitivity to detect reversible changes in the surface charge density on the membranes by the formation of chelator complexes, docking of eGFP with histidine tags, and cancellation by EDTA. The achievable resolution of ΔQ ≥ 0.1 μC/cm² is better than that obtained for membrane‐functionalized p‐GaAs, 0.9 μC/cm², and for ITO coated with a polymer supported lipid monolayer, 2.2 μC/cm². Moreover, we examined the potential application of optically active InGaN/GaN quantum dot structures, for the detection of changes in the surface potential from the photoluminescence signals measured at room temperature.     

Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications

Three–dimensional, microperiodic scaffolds of regenerated silk fibroin have been fabricated for tissue engineering by direct ink writing. The ink, which consisted of silk fibroin solution from the Bombyx mori silkworm, was deposited in a layer‐by‐layer fashion through a fine nozzle to produce a 3D array of silk fibers of diameter 5 µm. The extruded fibers crystallized when deposited into a methanol‐rich reservoir, retaining a pore structure necessary for media transport. The rheological properties of the silk fibroin solutions were investigated and the crystallized silk fibers were characterized for structure and mechanical properties by infrared spectroscopy and nanoindentation, respectively. The scaffolds supported human bone marrow‐derived mesenchymal stem cell (hMSC) adhesion, and growth. Cells cultured under chondrogenic conditions on these scaffolds supported enhanced chondrogenic differentiation based on increased glucosaminoglycan production compared to standard pellet culture. Our results suggest that 3D silk fibroin scaffolds may find potential application as tissue engineering constructs due to the precise control of their scaffold architecture and their biocompatibility.     

Zero forcing based sphere decoder for generalized spatial modulation systems

To reduce the number of radio frequency (RF) chains in multiple input multiple output (MIMO) systems, generalized spatial modulation (GSM) techniques have been proposed in the literature. In this paper, we propose a zero‐forcing (ZF)‐based detector, which performs an initial pruning of the search tree that will be considered as the initial condition in a sphere decoding (SD) algorithm. The proposed method significantly reduces the computational complexity of GSM systems while achieving a near maximum likelihood (ML) performance. We analyze the performance of the proposed method and provide an analytic performance difference between the proposed method and the ML detector. Simulation results show that the performance of the proposed method is very close to that of the ML detector, while achieving a significant computational complexity reduction in comparison with the conventional SD method, in terms of the number of visited nodes. We also present some simulations to assess the accuracy of our theoretical results.     

FinFET for high sensitivity ion and biological sensing applications

A double-gate (DG) fin field effect transistor (FinFET) is discussed as new label-free ion and biological sensor. Simulations as function of channel doping, geometrical dimensions, operation point and materials investigated the device response to an external potential difference which provides a body threshold voltage modulation. The simulation results presented in this work clearly state the key features for an ultrasensitive FET based sensor: an enhancement low doped and partially gated transistor operating in weak-moderate inversion regime. The optimized sensitivity, obtained when the width of the fin is equal to the gate height (w_NW ∼ h_g), reaches a value of 85% for an extraction current, I_d, of 0.1 μA. These results pave the way for the fabrication process of an innovative CMOS compatible sensing system.     

Organic Single Crystal Patterning Method for Micrometric Photosensors

Light detection technologies are of interest due to their applications in energy conversion and optical communications. Single-crystal organic semiconductors, such as rubrene, present high detectivities and charge carrier mobility, making them attractive for light-sensing applications. Growth of high crystallinity organic crystals is achieved using vapor processes, forming crystals of arbitrary shapes and orientations and requiring posterior patterning processes. However, patterning the organic semiconductors using industry-standard microfabrication techniques is not straightforward, as these often cause irreversible damage to the crystals. Here the fabrication of patterned micrometric rubrene photosensors is demonstrated through a combination of photolithography and Reactive Ion Etching steps. Protective layers during microfabrication minimize degradation of optoelectronic properties of the organic single crystals during fabrication. Crystals undergoing the patterning process presented a survival rate of 39%. Photoresponse values of up to 41 mA W⁻¹ are obtained under illumination at 500 nm. This opens a route for the industrial-scale fabrication process of high-performance optoelectronic devices based on organic crystals semiconductors.     

A Genetic‐Algorithm‐Based Optimized Clustering for Energy‐Efficient Routing in MWSN

With the increasing demands for mobile wireless sensor networks in recent years, designing an energy‐efficient clustering and routing protocol has become very important. This paper provides an analytical model to evaluate the power consumption of a mobile sensor node. Based on this, a clustering algorithm is designed to optimize the energy efficiency during cluster head formation. A genetic algorithm technique is employed to find the near‐optimal threshold for residual energy below which a node has to give up its role of being the cluster head. This clustering algorithm along with a hybrid routing concept is applied as the near‐optimal energy‐efficient routing technique to increase the overall efficiency of the network. Compared to the mobile low energy adaptive clustering hierarchy protocol, the simulation studies reveal that the energy‐efficient routing technique produces a longer network lifetime and achieves better energy efficiency.     

Reversible Fragmentation and Self‐Assembling of Nematic Liquid Crystal Droplets on Functionalized Pyroelectric Substrates

Investigation on the behavior of nematic liquid crystals on functionalized polar dielectric crystal substrates is accomplished. Very interesting effects can be observed in maneuvering liquid crystal droplets on the substrate surface, driven by electric fields generated by pyroelectric effect. Reversible drops fragmentation and self‐assembling in different configurations can be achieved. The dynamics of the observed phenomena is studied and the repeatability of the process is full assessed.     

Publication modalities ‘article in press’ and ‘open access’ in relation to journal average citation

Scientometrics - There has been a generalization in the use of two publication practices by scientific journals during the past decade: (1) ‘article in press’ or early view, which...     

The use and nature of present-focused interventions in cognitive and behavioral therapies for depression.

To improve cognitive and behavioral therapies (CBT) for depression, several approaches recommend an increased focus on the occurrence of problems as they occur in the therapeutic relationship or in relation to the live therapy process, referred to as present-focused. A lingering question has been the degree to which CBT therapists already engage in present-focused work. This study utilized sessions from recent trials of CBT for depression and, in Phase I, raters identified present-focused interventions on a turn-by-turn basis. Phase II raters used a qualitative analysis to determine categories of present-focused interventions. Results indicated that therapists rarely focused on the therapeutic relationship; when they did, it was often transient and lacking in the elaborations suggested by newer approaches. Therapists more often performed therapy process and emotion focused interventions, but these also tended to lack elaboration. (PsycINFO Database Record (c) 2010 APA, all rights reserved)