三峡工程的防排水措施与材料

介绍了三峡工程中大坝、永久船闸基础及一些建筑物的防排水措施和所用材料。     

A box beam finite element for the elastic analysis of thin-walled structures

The purpose of this paper is to present a formulation of a curved thin-walled box beam finite element having a variable cross-section with at least one vertical axis of symmetry.

To allow for the effects of warping and distortion, three degrees of freedom have been included in the formulation. These degrees of freedom have been designated as the rate of change of twisting angle, the distortional angle of the cross-section, and the rate of change of distortional angle. The effect of shear lag has also been included.

The element may be used for the elastic analysis of a variety of thin-walled structures and in particular for the preliminary analysis of box bridge decks where a three-dimensional analysis may be unnecessary. The accuracy of the element has been demonstrated by comparison of the results obtained with known results from other methods for some examples.     

国际航空货运枢纽港:以航空物流为新竞争优势

20世纪80年代以来,经济全球化促进了亚太地区的一些国家和地区的经济迅速增长,同时也带动了区内航空货运的发展.国际航空货运枢纽港(GTP:Global TransPark)是新经济背景下的一种新型货运机场,对提升区域竞争力有着重要的意义.我国有必要建设GTP,以期在21世纪电子商贸及高科技加工工业的发展上抢先建立滩头阵地.逐渐成熟的香港都会经济区有着"一国两制"的特殊地缘政治和制度优势,因而,在亚洲各竞争中的经济区域中,它是建设亚洲首个、也将是最大的GTP的最佳区位.GTP的建成运作可以提升该都会经济区的总体竞争力,加快其经济重构的步伐.结合区内的其它4个机场,珠海机场有条件发展成为GTP.然而,GTP的建设需要有关机场与地方政府间在关税、制空权、后勤服务以及水陆交通等方面进行协调,这将对该都会经济区的内部合作提出更新的挑战.     

Measurement of the intrinsic process zone in rock using acoustic emission

Laboratory specimens with a smooth boundary (no notch) were fabricated from four different rock types (grain sizes from 0.1–10 mm) and were tested in three-point bending. The locations of acoustic emission that occurred around peak load were used to characterize the dimensions of the region of localized microcracking, the so-called intrinsic process zone. The size of this zone was found to vary significantly between the rock types, but was not found to vary significantly for different size beams of the same material. An approximately linear relation was found between the width of the intrinsic process zone and the logarithm of the grain size. An explanation of size effect evolves naturally by considering the intrinsic process zone as a material characteristic. Two different models were used to analyze stress at failure. The first treated the intrinsic process zone as a mathematical crack, an infinite stress raiser, from which a K_IC value was calculated. The second model assumed the intrinsic process zone was a cohesive notch, a finite stress raiser, from which the theoretical tensile strength was defined. The second method seemed somewhat better at predicting size effect on nominal peak stress.     

Trace-metal concentrations in normal human liver: methods to cope with marked variability

Concentrations of trace elements in human tissues characteristically vary widely, and the distributions of most concentrations are skewed to the right. Examination of some of the factors which contribute to the marked variability and skewness of the concentrations revealed that: (1) distributions of concentrations are satisfactorily normal (Gaussian) after logarithmic transformation, (2) ash weight is the best frame of reference in which to report results, (3) the distributions of metal concentrations are not further normalized by adjustments which assume that tissue lipid or collagen contains a fixed fraction of the metal found in the parenchyma, and (4) the choice of sample site within the liver is of minimal significance.     

Development of passive viscoelastic damper to attenuate excessive floor vibrations

Recent changes in the construction of building floors have included the use of light material composite systems and long span floor systems. Although these changes have many advantages, such floor systems can suffer from excessive vibration due to human activities. This problem is exacerbated in office buildings due to the reduction in inherent damping associated with modern fit outs. Excessive floor vibrations are often realised after the completion of construction or following structural modifications and normally arise due to inadequate knowledge of the damping values in the design process. Thus rectification measures are normally required to reduce floor accelerations. This paper proposes a new innovative passive viscoelastic damper to reduce floor vibrations. This damper can be easily tuned to the fundamental frequency of the floor and can be designed to achieve various damping values. The paper discusses the analytical development of the damper with experimental results presented on a prototype to demonstrate its effectiveness.     

Large bending of pipes

The computer model developed has been used successfully for studying the large pipe-bending problem frequently encountered in offshore structural engineering. The pipe-soil interaction is modelled by using the Coulomb friction law. The modified finite element approach coupled with a modified tangent stiffness procedure is used to handle the nonlinearities (geometric and material, etc.) in the problem. The material nonlinearity has been considered both by the plastic-hinge method and by an elastic-plastic method. Before studying the practical problems, sufficient check problems were analysed and a good agreement was found between theoretically exact solutions and the results obtained from the developed computer model.     

A quadratic complementarity problem related to the optimal design of a pipeline freely resting on a rough sea bottom

A submarine pipeline resting on a rigid, frictionless seabed assumes an equilibrium configuration which can be determined by solving a unilateral contact problem, i.e. a quadratic program or a variational inequality.When the sea bed is irregular, its profile along the sealine can be modified, in present offshore technology, by means of costly trench excavations or artificial supports, in order to avoid excessive bending moments in the pipe. Thus, the problem arises of determining the minimum cost of the profile changes provided that a specified curvature is nowhere exceeded.This optimal design problem is solved by assuming a quadratic cost function and reducing it to a sequence of convex quadratic programming problems leading to the optimal design situation. Upper and lower bounds on the absolute minimum cost and optimality conditions are established. A suitable algorithm for solving the problem in a finite number of steps is developed. Its generalization to allow for ‘fixed charges’ due to the equipment mobilization cost is presented. Two numerical examples illustrate the optimum (minimum cost) proposed design method.     

The Italian national survey of indoor radon exposure

An investigation is being developed by the Camitato Nazionale per la Ricerca e per lo Sviluppo dell'Energia Nucleare e delle Energie Alternative, ENEA, to assess the indoor exposure of the Italian population. The programme, which started in 1982, includes regional and local surveys in all the administrative districts and intensive investigations of factors which influence indoor radon levels. The survey is organized by statistical areas of sampling to obtain representative samples of houses. The definition of the areas takes into account basic parameters e.g. geolithological environments, radon soil gas from underlying soils and rocks, specific activities of local building materials, climatic and seasonal variations, building technology, types of houses and town planning. The collected data may also be used for the compilation of radon risk maps to plan special monitoring and remedial actions if needed. Preliminary results concerning the above items are discussed.     

Buckling of tube-stiffened prolate domes under external water pressure

The paper describes experimental tests carried out on three tube-stiffened prolate hemi-ellipsoidal domes under external water pressure.The tubes were stuck to the internal surfaces of these three domes, in their flanks, and the experimental tests showed that the tubes increased the buckling pressures of these domes, especially in one case, when the tube was subjected to an initial internal pressure.All three domes failed by lobar buckling, in their flanks, and showed buckling resistances much larger than similar unstiffened domes.