Determination of ethychlozate and its degradation product in fruits by HPLC and LC/MS

A method was developed for the analysis of ethychlozate (CIE) and its decomposition compound, 5-chloro-3(1H)-indazolylacetic acid (CIA) in fruits by HPLC and LC/MS. The sample was homogenized with 1 mol/L HC1, and CIE and CIA were extracted with 5 mol/L HCl and acetone. They were extracted from the acetone extract with diethylether-n-hexane (2:1). CIE was hydrolyzed to CIA with methanol-4 mol/L KOH (1:1). The solution was made acidic, and CIA was extracted with diethylether-n-hexane (2:1). The extract was cleaned up on a silica gel column. CIA was determined by HPLC-UV and LC/MS (Scan or SIR). Four fruits were spiked with CIE or CIA at 0.5 microgram/g and analyzed by the proposed method with HPLC. The average recoveries were 77.2-83.2% for CIE and 71.2-89.2% for CIA. The concentrations determined by LC/MS were 10-25% higher than the values by HPLC. The limit of detection (LOD) of CIA standard solution by HPLC corresponds to 0.015 microgram/g of CIE in the sample. In the same way, the LOD of CIA by LC/MS (SIR) corresponds to 0.009 microgram/g of CIE in the sample.     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.     

Synthesis of Compositionally Homogeneous Sr(CuxZn1−x)1/2W1/2O3

A complex perovskite of Sr(Cu _x Zn_{1- x} )_1/2 W_1/2O₃ (SCZW) is synthesized by a new combination of wet and dry processess. Mixed oxides containing Cu²⁺ and Zn²⁺ (CZ) are prepared by the wet process (coprecipitate method). SCZW is obtained by the dry process (mixed-oxide method) from a mixture of CZ, SrCO₃, and WO₃. SCZW has practically no compositional, unlike solid solutions prepared by the conventional dry method. The wet–dry process method is useful because the wet process is applied to only B-site cations having the same valence.     

High temperature catalytic combustion of methane and propane over hexaaluminate catalysts: NOx emission characteristics

Several hexaaluminate-related materials were prepared via hydrolysis of alkoxide and powder mixing method for high temperature combustion of CH₄ and C₃H₈, in order to investigate the effect of the concentration of the fuels, O₂ and H₂O on NO_x emission and combustion characteristics. Among the hexaaluminate catalysts, Sr_0.8La_0.2MnAl₁₁O₁₉₋ prepared by the alkoxide method exhibited the highest activity for methane combustion and low NO_x emission capability. NO_x emission at 1500 °C was increased linearly with O₂ concentration, whereas water vapor addition decreased NO_x emission in CH₄ combustion over the Sr_0.8La_0.2MnAl₁₁O₁₉₋ catalyst. In the catalytic combustion of C₃H₈ over the Sr_0.8La_0.2MnAl₁₁O₁₉₋ catalyst, the amount of NO_x emitted was raised in the temperature range between 1000 and 1500 °C when the C₃H₈ concentration increased from 1 to 2 vol.%. It was found that NO_x emission in this temperature range was reduced effectively by adding water vapor.     

Synthetic potential of molluscan sulfatases for the library synthesis of regioselectively O-sulfonated D-galacto-sugars

The substrate specificities of three molluscan sulfatases (E.C. 3.1.6.1; snail, abalone, and limpet origins) were investigated with assorted p-nitrophenyl (pNP) di-O-sulfonated beta-D-galactopyranosides and beta-lactosides [3,6-SO(3) Gal (1), 3',6'-SO(3) Lac (2), 4, 6SO(3) Gal (3), 2,6-SO(3) Gal (4), 3,4-SO(3) Gal (5), and 3,6-SO(3) GalNAc (6); Ac, acetyl; Gal, galactose; Lac, lactose] together with mono-O-sulfonated beta-D-galactopyranoside [pNP 3SO(3)-Gal (7)] and tri-O-sulfonated alpha-D-galactopyranoside [2,3,6-SO(3)-alpha-Gal (11)]. Some notable differences between the substrate specificity of the three sulfatases were disclosed; snail sulfatase hydrolyzed the 3O- and 2O-sulfo groups of 1 and 4, respectively, to afford 6SO(3) Gal (9) in high yields, while the abalone enzyme did not act on 4. Only the limpet enzyme could cleave the 3O-sulfo groups of 7 to give pNP beta-galactoside. In contrast, every enzyme could utilize 11 as a good substrate to afford a mixture of 6SO(3)-alpha-Gal (13) and 2,6-SO(3) alpha-Gal (12). None of the enzymes could cleave the O-sulfo groups of 5 and 6, which indicates that a primary 6O-sulfo group tends to promote the enzymatic hydrolysis of O-sulfo groups at the secondary positions.     

An Additional Insight into the Correlation between the Distribution Ratios and the Aqueous Acidity of the TODGA System

Abstract

Extraction of Eu(III) and Am(III) from HNO₃ into the organic solvents using N,N,N′,N′‐tetraoctyl‐diglycolamide (TODGA) was investigated in order to study the detailed extraction reaction. The chemical species: 1:2 for metal:TODGA complex is present in polar diluents. On the other hand, the metal complexes need three or more TODGA molecules to remain stable in non‐polar diluents. The HNO₃ concentration dependence on the distribution ratio suggests that HNO₃ participates in the metal extraction. Infrared spectra indicate that the carbonyl oxygen coordinates with Eu(III), and luminescence lifetimes suggest that there are no water molecules in the inner coordination sphere of the extracted Eu‐complex.     

Fabrication of Functionally Graded SiO2‐Mo Material by Centrifugation and Floc‐Casting of Highly Concentrated Slurry

To fabricate functionally graded materials, a highly concentrated slurry of SiO₂‐Mo system was prepared and centrifugal force was applied in an attempt to achieve a graded composition. Subsequently, we formed a homogeneous green body with compositional gradation by floc‐casting at 80°C, which was then fired at 1750°C for 10 min in Ar. The sintered body had compositional ratios of SiO₂ and Mo as well as electrical conductivities that changed gradually along the direction of centrifugal force. The results demonstrate that centrifugation and control of slurry characteristics such as flocculation are effective in fabricating functionally graded SiO₂‐Mo materials.     

Structure of silane layer formed on silica particle surfaces by treatment with silane coupling agents having various functional groups

The surface treatment of spherical silica particles with silane coupling agents having various organic functional groups was conducted and the effect of the alkoxy group number on the molecular flexibility of the silane chain with multilayer coverage was investigated using ¹H-pulse nuclear magnetic resonance spectroscopy. The silica particles were treated with 2-propanol solution and heated at 120?°C for 24?h after solvent evaporation to accelerate the polycondensation reaction of silanol groups. For multilayer coverage, flexible linear chain and rigid network structures were expected to form on the surface from the di- and trialkoxy structures, respectively. However, the rigid network structure was formed from both the di- and trialkoxy structures with glycidoxy, amino, and methacryloxy functional silanes. Ring opening of the epoxy group occurred, followed by reaction to form the network structure, even with the dialkoxy structure of the glycidoxy functionality. Ring opening of the epoxy group could be reduced by pH adjustment of the treatment solution and the linear chain structure was formed from the dialkoxy structure. In the case of amino and methacryloxy functional groups, hydrogen bonds were formed between the amino or methacryloxy groups and the silanol groups on the silica surface or silane molecules.     

Neuroprotective Effects of Liraglutide for Stroke Model of Rats

The number of diabetes mellitus (DM) patients is increasing, and stroke is deeply associated with DM. Recently, neuroprotective effects of glucagon-like peptide-1 (GLP-1) are reported. In this study, we explored whether liraglutide, a GLP-1 analogue exerts therapeutic effects on a rat stroke model. Wistar rats received occlusion of the middle cerebral artery for 90 min. At one hour after reperfusion, liraglutide or saline was administered intraperitoneally. Modified Bederson’s test was performed at 1 and 24 h and, subsequently, rats were euthanized for histological investigation. Peripheral blood was obtained for measurement of blood glucose level and evaluation of oxidative stress. Brain tissues were collected to evaluate the level of vascular endothelial growth factor (VEGF). The behavioral scores of liraglutide-treated rats were significantly better than those of control rats. Infarct volumes of liraglutide-treated rats at were reduced, compared with those of control rats. The level of derivatives of reactive oxygen metabolite was lower in liraglutide-treated rats. VEGF level of liraglutide-treated rats in the cortex, but not in the striatum significantly increased, compared to that of control rats. In conclusion, this is the first study to demonstrate neuroprotective effects of liraglutide on cerebral ischemia through anti-oxidative effects and VEGF upregulation.     

High thermal stable thermoplastic-thermosetting polyimide film by use of asymmetric dianhydride (a-BPDA)

In order to obtain thermoplastic (before curing) and thermosetting (after curing) polyimides with high T_g for adhesive film, we prepared novel polyimides having phenylethynyl group in the side chain (44% of concentration of curing group) from asymmetric 2,3,3′,4′-biphenyltetracarboxylic dianhydride (a-BPDA), 3,4′-oxydianiline (3,4′-ODA) or 1,3-bis(4-aminophenoxy)benzene (1,3,4-APB) or 1,3-bis(3-aminophenoxy)benzene (1,3,3-APB), and 2,4-diamino-1-(4-phenylethynylphenoxy)benzene (mPDAp). Among three kinds of polymer, uncured polyimide of a-BPDA/1,3,4-APB; mPDAp had rather high T_g (265 °C, DMA) and thermoplasticity (E′ drop>10³ at T_g). After curing reaction of phenylethynyl group, the T_g of the polyimide was increased dramatically (364 °C, DMA). The polyimide derived from 1,3,4-APB having less concentration of curing group (20%) was also prepared to improve further film flexibility and toughness.