Three-dimensional positioning of optically trapped nanoparticles

We firstly demonstrate the three-dimensional (3D) measurement of a nanometer-sized sphere held in optical tweezers in water using an in-line digital holographic microscope with a green light emitting diode. Suppressing the movement with optical tweezers enabled us to detect the three-dimensional position of a polystyrene sphere with a diameter of 200 nm. The positioning resolutions of the microscope were 3.2 nm in the transverse direction and 3.4 nm in the axial direction, from the standard deviation of measurements of the 200 nm sphere fixed on glass. Changes in the Brownian motion in response to a change in the trapping laser power were measured. We also demonstrated that this holographic measurement is an effective method for determining the threshold power of the optical trapping.     

Boiling heat transfer in a narrow space controlled by punched interference plate

An experiment on pool boiling in methanol was performed for a case in which the boiling space was controlled by an interference plate with many holes. The narrow space, 0.12 mm in thickness, between the heat transfer surface and the interference plate was hermetically sealed at the perimeter. Therefore, the vapor and liquid were only exchanged through the holes in the interference plate. The degree of superheat at the onset of boiling was 0.7 K without overshoot at 10‐mm plate thickness, 1‐mm hole diameter, and 3.85‐mm hole pitch. The critical heat flux obtained was the same value without the interference plate mentioned above. The interference plate disturbed free convection and a superheat layer was provided under small heat flux on the heat transfer surface. The critical bubble diameter for the onset of boiling was decreased as the temperature of the superheat layer was increased. Thus, the degree of superheat at the onset of boiling was decreased. © 2004 Wiley Periodicals, Inc. Heat Trans Asian Res, 33(7): 462–471, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20028     

Effects of Aging Temperature on Electrical Conductivity and Hardness of Cu-3 at. pct Ti Alloy Aged in a Hydrogen Atmosphere

To improve the balance of the electrical conductivity and mechanical strength for dilute Cu-Ti alloys by aging in a hydrogen atmosphere, the influence of aging temperature ranging from 673 K to 773 K (400 °C to 500 °C) on the properties of Cu-3 at. pct Ti alloy was studied. The Vickers hardness increases steadily with aging time and starts to fall at 3 hours at 773 K (500 °C), 10 hours at 723 K (450 °C), or over 620 hours at 673 K (400 °C), which is the same as the case of conventional aging in vacuum. The maximum hardness increases from 220 to 236 with the decrease of aging temperature, which is slightly lower than aging at the same temperature in vacuum. The electrical conductivity at the maximum hardness also increases from 18 to 32 pct of pure copper with the decrease of the temperature, which is enhanced by a factor of 1.3 to 1.5 in comparison to aging in vacuum. Thus, aging at 673 K (400 °C) in a hydrogen atmosphere renders fairly good balance of strength and conductivity, although it takes nearly a month to achieve. The microstructural changes during aging were examined by transmission electron microscopy (TEM) and atom-probe tomography (APT), and it was confirmed that precipitation of the Cu₄Ti phase occurs first and then particles of TiH₂ form as the third phase, thereby efficiently removing the Ti solutes in the matrix.     

Fabrication of Pd–DNA and Pd–CNT hybrid nanostructures for hydrogen sensors

This review reports fabrication methods for ordered metallic nanostructures such as nanowires and nanoparticles based on deoxyribonucleic acid (DNA) templates. The phosphate groups in DNA are negatively charged; consequently, the DNA conformation may mineralize metals, e.g., palladium (Pd) at a relatively high metal concentration. We successfully form unique spherically shaped moss-like hybrid Pd nanoparticles using the small compacted globular state of DNA by controlling the reductive reaction. Pd can absorb hydrogen to become PdH_x, and hydrogen storage increases the electrical resistance and volume of Pd materials. Hence, the use of this material is attracting growing interest as a reliable, cheap, ultracompact, and safe hydrogen sensor. Pd–DNA hybrid nanoparticles can be used as highly sensitive hydrogen sensors, which exhibit a switch response that depends on the volume expansion in a cyclic atmosphere exchange. This paper also shows the fabrications of Pd–carbon nanotube (CNT) hybrid nanostructures.     

Influence of atmosphere on photoluminescence properties of Eu-doped ZnO nanocrystals

We have fabricated Eu³⁺-doped ZnO (ZnO:Eu) nanocrystals (NCs) by a reverse micelle method, and have studied their photoluminescence (PL) properties in vacuum, nitrogen gas, and oxygen gas atmospheres. The ZnO:Eu NCs exhibit the exciton, defect and Eu³⁺ PL under the inter-band photoexcitation of the ZnO host NCs. The intensity ratio among the three PL peaks is sensitive to the atmosphere for the PL measurements. We discuss the influence of the surrounding gas atmosphere to the PL properties.     

Control of orientation of rhodamine 6G in organic-inorganic hybrid film by capillary electrophoresis doping technique

Rhodamine 6G (R6G) molecules were fixed with oriented transition dipole moment in organic-inorganic hybrid film by capillary electrophoresis doping (CED) technique and their orientation distribution was analyzed quantitatively by using single-molecule fluorescence defocused imaging. The CED technique forces R6G molecules to migrate into the hybrid film with the dipole moments aligned parallel to the electric field of CED. An appropriate pre-baking of the film enables stabilization of the oriented molecules inside the film; the doped molecules have the direction of the transition dipole moment parallel with the film plane.     

Nonlinear two-stage model for color discrimination

We modified a two-stage model for color discrimination proposed in a previous study [Color Res. Appl.25, 105 (2000)]; in order to extend the model to wider conditions, we considered the conditions with luminance modulations in addition to color modulations. Using the modified model, we successfully predicted color discrimination data with test color changes along both the chromatic and luminance axes under a variety of background colors. Both qualitative and quantitative assessments in modeling showed that nonlinearity is required in both the cone and the cone-opponent stages to interpret adaptation effects of both color and luminance on color discrimination. This fact suggests that the nonlinear properties at each stage have different roles in color perception.     

Present status and future perspectives on the development of bioartificial kidneys for the treatment of acute and chronic renal failure patients

A bioartificial renal tubule device (BTD) consisting of a hollow-fiber module and human proximal tubular epithelial cells has been completed technically by Humes and colleagues and a few other groups. Humes and colleagues developed BTD, treated acute kidney injury patients with multiorgan failure by continuous hemofiltration (CHF) in conjunction with BTD, and reported a significantly higher survival rate than that by CHF with BTD without cells in the Food and Drug Administration phase IIa trial. However, BTD has never been approved by the US Government, as the CHF+BTD treatment did not show a significant difference from the control group in the phase IIb trial. Human proximal tubular epithelial cells were confirmed to be overgrown on artificial membrane, which resulted in the inhibition of active transports and the metabolism of essential substances. Function of the BTD could be maintained in a U0126-contained medium, even if the BTD had to have been waited by a new acute kidney injury patient for several weeks. For wearable kidneys, heparin-covalently bound membrane or methacryloyloxyethyl phosphorylcholine (MPC) polymer-coated membranes are candidates for antithrombogenic hemofilters, while endothelial progenitor cells from a cord blood, CD133(+) cells-attached hemofilter in which the permeability of the cells was enhanced by the enlarged diameter of fenestrae by treating with cytochalasin B are another candidate. The MPC blend membrane containing 1% of the MPC polymer in polysulfone was developed as a BTD module. MPC was 7 times larger at the sponge layer than at the skin layer of the membrane, resulting in hemocompatibility at the sponge layer and cytocompatibility at the skin layer.     

Flame development along a straight vortex

Flame development along a straight vortex was studied experimentally to elucidate the effects of the maximum circumferential velocity and the density ratio of the flame. A pair of straight vortices was produced in nitrogen-diluted stoichiometric hydrogen-oxygen mixtures with density ratios ranging from 5.3 to 7.2. The velocity field measured by particle image velocimetry (PIV) showed that the vortex tube had a mean maximum circumferential velocity ranging from 18.0 to 35.8 m/s and had a mean core diameter ranging from 5 to 6 mm. One of the vortices was ignited at the core by a focused laser at 193 nm without disturbing the flow field. The flame propagated along the axis of the straight vortex at a speed much higher than in the radial direction or in the quiescent mixture. The axial propagation velocity increased over time and became nearly constant when the half-axial length of the flame was larger than the core diameter of the vortex tube. The axial propagation velocity at steady state was roughly proportional to the maximum circumferential velocity and to the density ratio minus unity. The axial propagation velocity in the initial stage increased with the square root of the half-axial length of the flame as well as with the maximum circumferential velocity and the density ratio minus unity.