A TEA‐CO2 laser oscillation by an inductive energy storage pulsed‐power generator using a wire‐fuse opening switch

We have carried out experiments on TEA‐CO₂ laser oscillation using the inductive energy storage pulsed‐power generator, which has a copper wire fuse as an opening switch. Maximum laser output energy of about 1 J/pulse was obtained in the case of a fuse length of 5 cm and energy storage inductance of 8 μH. The laser output energy depends on the energy storage inductance and the parameters of the fuse. In this paper, the dependencies of laser output energy on inductance and fuse length, and a comparison between the inductive and capacitive system were described. Furthermore the laser efficiency was discussed by calculating the electron energy distribution of laser main discharge region. © 2000 Scripta Technica, Electr Eng Jpn, 132(1): 15–21, 2000     

Characterization of Bi and Fe co-doped PZT capacitors for FeRAM

Ferroelectric random access memory (FeRAM) has been in mass production for over 15 years. Higher polarization ferroelectric materials are needed for future devices which can operate above about 100 °C. With this goal in mind, co-doping of thin Pb(Zr₄₀,Ti₆₀)O₃ (PZT) films with 1 at.% Bi and 1 at.% Fe was examined in order to enhance the ferroelectric properties as well as characterize the doped material. The XRD patterns of PZT-5%BiFeO₃ (BF) and PZT 140-nm thick films showed (111) orientation on (111) platinized Si wafers and a 30 °C increase in the tetragonal to cubic phase transition temperature, often called the Curie temperature, from 350 to 380 °C with co-doping, indicating that Bi and Fe are substituting into the PZT lattice. Raman spectra revealed decreased band intensity with Bi and Fe co-doping of PZT compared to PZT. Polarization hysteresis loops show similar values of remanent polarization, but square-shaped voltage pulse-measured net polarization values of PZT-BF were higher and showed higher endurance to repeated cycling up to 10¹⁰ cycles. It is proposed that Bi and Fe are both in the +3 oxidation state and substituting into the perovskite A and B sites, respectively. Substitution of Bi and Fe into the PZT lattice likely creates defect dipoles, which increase the net polarization when measured by the short voltage pulse positive-up-negative-down (PUND) method.     

Site-Specific Fracture Healing: Comparison between Diaphysis and Metaphysis in the Mouse Long Bone

The process of fracture healing varies depending upon internal and external factors, such as the fracture site, mode of injury, and mechanical environment. This review focuses on site-specific fracture healing, particularly diaphyseal and metaphyseal healing in mouse long bones. Diaphyseal fractures heal by forming the periosteal and medullary callus, whereas metaphyseal fractures heal by forming the medullary callus. Bone healing in ovariectomized mice is accompanied by a decrease in the medullary callus formation both in the diaphysis and metaphysis. Administration of estrogen after fracture significantly recovers the decrease in diaphyseal healing but fails to recover the metaphyseal healing. Thus, the two bones show different osteogenic potentials after fracture in ovariectomized mice. This difference may be attributed to the heterogeneity of the skeletal stem cells (SSCs)/osteoblast progenitors of the two bones. The Hox genes that specify the patterning of the mammalian skeleton during embryogenesis are upregulated during the diaphyseal healing. Hox genes positively regulate the differentiation of osteoblasts from SSCs in vitro. During bone grafting, the SSCs in the donor’s bone express Hox with adaptability in the heterologous bone. These novel functions of the Hox genes are discussed herein with reference to the site-specificity of fracture healing.     

Natural Killer T Cells Are Involved in Atherosclerotic Plaque Instability in Apolipoprotein-E Knockout Mice

The infiltration and activation of macrophages as well as lymphocytes within atherosclerotic lesion contribute to the pathogenesis of plaque rupture. We have demonstrated that invariant natural killer T (iNKT) cells, a unique subset of T lymphocytes that recognize glycolipid antigens, play a crucial role in atherogenesis. However, it remained unclear whether iNKT cells are also involved in plaque instability. Apolipoprotein E (apoE) knockout mice were fed a standard diet (SD) or a high-fat diet (HFD) for 8 weeks. Moreover, the SD- and the HFD-fed mice were divided into two groups according to the intraperitoneal injection of α-galactosylceramide (αGC) that specifically activates iNKT cells or phosphate-buffered saline alone (PBS). ApoE/Jα18 double knockout mice, which lack iNKT cells, were also fed an SD or HFD. Plaque instability was assessed at the brachiocephalic artery by the histological analysis. In the HFD group, αGC significantly enhanced iNKT cell infiltration and exacerbated atherosclerotic plaque instability, whereas the depletion of iNKT cells attenuated plaque instability compared to PBS-treated mice. Real-time PCR analyses in the aortic tissues showed that αGC administration significantly increased expressional levels of inflammatory genes such as IFN-γ and MMP-2, while the depletion of iNKT cells attenuated these expression levels compared to those in the PBS-treated mice. Our findings suggested that iNKT cells are involved in the exacerbation of plaque instability via the activation of inflammatory cells and upregulation of MMP-2 in the vascular tissues.     

Synthesis of 1,3-dicapryloyl-2-docosahexaenoylglycerol by a combination of nonselective and <Emphasis Type="Italic">sn</Emphasis>-1,3-selective lipase reactions

A two-step consecutive synthetic method for the production of symmetrical, structured lipids by a combination of nonselective and sn-1,3 regioselective ester exchange reactions was investigated. In the first step, TAG with unspecifically substituted DHA were obtained by reacting tricapryloylglycerol (CCC) with ethyl docosahexanoate (EtDHA) using the lipase QLM (from Alcaligenes sp.), followed by removing the ethyl ester and CCC by molecular distillation. In the second step, sn-1,3 regioselective ester exchange was achieved by reacting the resulting TAG with ethyl caprylate (EtC) using the immobilized lipase Novozyme 435 (Candida antarctica lipase), followed by distillation of the ethyl ester and CCC to give sn-1,3-dicapryloyl-sn-2-docosahexaenoylglycerol (CDC). The acylglycerol composition of CDC was analyzed by GLC, which showed that the content of dicapryloyl-docosahexaenoylglycerols (2CD) in the product was 76.4%, and that the ratio of CDC to sn-1,2-dicapryloyl-sn-3-docosahexaenoylglycerol contained in 2CD was 82.7∶17.3 (%). The distillates CCC, EtDHA, and EtC could be recycled repeatedly to produce CDC as the substrate for the consecutive ester exchange reaction. In addition, separation of CCC and EtDHA was unnecessary for reuse. The present method is considered to meet the requirements for industrial utilization, in which simplicity in scaleup, high yields, compact reaction system, and minimal formation of by-products are important factors.     

Effect of conspecific and heterospecific feces on foraging and oviposition of two predatory ladybirds: role of fecal cues in predator avoidance

Growing evidence suggests a flow of chemical information from higher to lower trophic levels that affects foraging and oviposition of prey in response to potential risks from predators. This was investigated in two species of ladybird predators of aphids, Harmonia axyridis and Propylea japonica. H. axyridis is known to be the stronger intraguild predator and P. japonica to be the more frequent intraguild prey in interactions of these two species. These ladybirds share aphid prey on mugworts, hibiscus, and Italian ryegrasses in fields of northern Japan but largely avoid each other on the same plant. Fecal cues of these ladybird predators were found to contribute in their assessment of predation risk from conspecific and heterospecific competitors in common habitats. Gravid females of H. axyridis reduced rates of feeding and oviposition when exposed to feces of conspecifics, but not when exposed to feces of P. japonica. In contrast, gravid females of P. japonica reduced feeding and oviposition when exposed to feces of both H. axyridis and its own species. Females of both ladybird species exhibited similar behavior in response to water extracts of feces. For P. japonica, the influence of heterospecific feces was greater than that of conspecific feces. Our results demonstrate that feces of ladybirds contain odors that have the potential to deter the feeding and oviposition activities of conspecific as well as heterospecific ladybirds. Such deterrence allows these insects to avoid predation risk. Differences in responses of the two predators are discussed.     

Improvement of SNAr Reaction Rate by an Electron‐Withdrawing Group in the Crosslinking of DNA Cytosine‐5 Methyltransferase by a Covalent Oligodeoxyribonucleotide Inhibitor

DNA cytosine 5‐methyltransferase (DNMT) catalyzes methylation at the C5 position of the cytosine residues in the CpG sequence. Aberrant DNA methylation patterns are found in cancer cells. Therefore, inhibition of human DNMT is an effective strategy for treating various cancers. The inhibitors of DNMT have an electron‐deficient nucleobase because this group facilitates attack by the catalytic Cys residue in DNMTs. Recently, we reported the synthesis and properties of mechanism‐based modified nucleosides, 2‐amino‐4‐halopyridine‐C‐nucleosides (d^XP), as inhibitors of DNMT. To develop a more efficient inhibitor of DNMT for oligonucleotide therapeutics, oligodeoxyribonucleotides (ODNs) containing other nucleoside analogues, which react more quickly with DNMT, are needed. Herein, we describe the design, synthesis, and evaluation of the properties of 2‐amino‐3‐cyano‐4‐halopyridine‐C‐nucleosides (d^XP^CN) and ODNs containing d^XP^CN, as more reactive inhibitors of DNMTs. Nucleophilic aromatic substitution (S_NAr) of the designed nucleosides, d^XP^CN, was faster than that of d^XP, and the ODN containing d^XP^CN effectively formed a complex with DNMTs. This study suggests that the incorporation of an electron‐withdrawing group would be an effective method to increase reactivity toward the nucleophile of the DNMTs, while maintaining high specificity.     

Thermal pretreatment of kudzu biomass (pueraria lobata) as filler in cost‐effective pla biocomposite fabrication process

This article aims on the fabrication of cost‐effective polylactic acid (PLA) biocomposites using kudzu biomass derivatives as new filler. In this way, it has been realized that pretreatment of the filler was an essential requirement. We demonstrated thermal pyrolysis process that targeted to extraction and isolation of all extractable and unnecessary compounds such as intracellular water and bio‐oil from the biomass. Also, to further improve the compatibility of the filler with PLA, noncatalytic thermal esterification reactions of kudzu after thermal pyrolysis (called char) were carried out as second pretreatment stage in the presence of phthalic anhydride. Kudzu derivatives obtained from either first or second pretreatment reactions were melt‐blended with PLA in various rates. The blends were then compression molded into dumbbell specimens. Physicomechanical properties of the prepared biocomposites were evaluated using several analytical techniques. It was found that biocomposites containing treated biomass had higher values of physicomechanical properties than untreated ones. The final rate of filler to PLA with acceptable properties was set up to 50%. Obviously, the cost of PLA can be reduced using higher rates of low‐cost filler on a finished‐product basis. Extracted valuable compounds from biomass via thermal pyrolysis could be another benefit of the process. POLYM. ENG. SCI., 55:340–348, 2015. © 2014 Society of Plastics Engineers     

Effect of glass fiber on the electrical resistivities of polyoxymethylene/maleic anhydride‐grafted polyethylene/multiwalled carbon nanotube composites

The effect of glass fiber (GF) on the electrical resistivities of polyoxymethylene (POM)/maleic anhydride‐grafted polyethylene (MAPE)/multiwalled carbon nanotube (MWCNT) composites is investigated. The POM/MAPE/MWCNT composites at a MWCNT loading of 0.75% are nonconductive because most of MWCNTs are isolated in the MAPE islands, and their electrical resistivities decrease significantly after the addition of GF because of the formation of MAPE‐coated GF structure, which facilitates the formation of conductive paths and was confirmed by field emission scanning electron microscopy (FESEM). The formation of MAPE‐coated GF structure is attributed to the interaction between GF and MAPE during melt compounding, as contrasted by the uncoated GF using high‐density polyethylene (HDPE) instead of MAPE. Nonconductive POM/5–20% MAPE/0.75% MWCNT composites become conductive upon the addition of 20% GF. This preparation method for conductive materials can be generalized to POM/5–20% maleic anhydride‐grafted polypropylene (MAPP)/0.75% MWCNT composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41794.