A multisource energy harvesting utilizing highly efficient ferroelectric PMN-PT single crystal

This paper demonstrates a multi-source energy harvester that is able to utilize simultaneously both piezoelectric and pyroelectric effects in lead magnesium niobate-lead titanate (PMN-PT) single crystal. The paper presents a study of PMN-PT single crystal with a (67:33) composition grown in our laboratory via a vertical gradient freeze method without any flux. The performance of the piezoelectric and pyroelectric energy harvester using unimorph device structure was evaluated via modeling and experiment. The theoretical study was implemented based on a distributed parameter electromechanical model and the modelling procedure was approximated using finite element analysis to predict the electromechanical behavior of the harvester. The maximum power density at a resonance frequency of 50 Hz and optimum resistance of 2 MΩ was 16.7 nW/(g² cm³) under a 1 g acceleration of vibration. The measured values of electrical output parameters were in good agreement with theoretical and modelling results using MATLAB and COMSOL Multiphysics, respectively. By using the pyroelectric effect along with the piezoelectric effect, the output voltage of the energy harvester was found to be enhanced at the optimum resistance and specific frequency values. It was noticed that the output voltage was increased monotonically with temperature-difference (ΔT) and reaches up to 180 % of its original value under temperature difference of 1.7 °C at a frequency value of 49 Hz.     

Intelligent System Application to Monitor the Smart City Building Lighting

A smart city incorporates infrastructure methods that are environmentally responsible, such as smart communications, smart grids, smart energy, and smart buildings. The city administration has prioritized the use of cutting-edge technology and informatics as the primary strategy for enhancing service quality, with energy resources taking precedence. To achieve optimal energy management in the multidimensional system of a city tribe, it is necessary not only to identify and study the vast majority of energy elements, but also to define their implicit interdependencies. This is because optimal energy management is required to reach this objective. The lighting index is an essential consideration when evaluating the comfort indicators. In order to realize the concept of a smart city, the primary objective of this research is to create a system for managing and monitoring the lighting index. It is possible to identify two distinct phases within the intelligent system. Once data collection concludes, the monitoring system will be activated. In the second step, the operation of the control system is analyzed and its effect on the performance of the numerical model is determined. This evaluation is based on the proposed methodology. The optimized results were deemed satisfactory because they maintained the brightness index value (79%) while consuming less energy. The intelligent implementation system generated satisfactory outcomes, which were observed 1.75 times on average.     

Implicit branching and parameterized partial cover problems

Covering problems are fundamental classical problems in optimization, computer science and complexity theory. Typically an input to these problems is a family of sets over a finite universe and the goal is to cover the elements of the universe with as few sets of the family as possible. The variations of covering problems include well-known problems like Set Cover, Vertex Cover, Dominating Set and Facility Location to name a few. Recently there has been a lot of study on partial covering problems, a natural generalization of covering problems. Here, the goal is not to cover all the elements but to cover the specified number of elements with the minimum number of sets. In this paper we study partial covering problems in graphs in the realm of parameterized complexity. Classical (non-partial) version of all these problems has been intensively studied in planar graphs and in graphs excluding a fixed graph H as a minor. However, the techniques developed for parameterized version of non-partial covering problems cannot be applied directly to their partial counterparts. The approach we use, to show that various partial covering problems are fixed parameter tractable on planar graphs, graphs of bounded local treewidth and graph excluding some graph as a minor, is quite different from previously known techniques. The main idea behind our approach is the concept of implicit branching. We find implicit branching technique to be interesting on its own and believe that it can be used for some other problems.     

Natural frequencies of functionally graded plates by a meshless method

We use the global collocation method, the first and the third-order shear deformation plate theories, the Mori–Tanaka technique to homogenize material properties, and approximate the trial solution with multiquadric radial basis functions to analyze free vibrations of functionally graded plates. Frequencies computed by the present method are found to agree well with those from the analytical solution of Vel and Batra, and the numerical solution of Qian et al. based on the meshless local Petrov–Galerkin formulation.     

Segmented object manufacturing

Rapid Prototyping (RP) is a technology based on a “divide-and-conquer” strategy that enables automatic physical realization of a design without any special tooling. However, existing RP processes suffer from staircase defects since they are all based on 2.5-axis kinematics. To minimize the error due to staircase defects parts are normally built from very thin layers typically with thickness values of 0.010 to 0.300 mm. Therefore, hundreds of layers are required to produce a typical object making RP a slow and costly process. To overcome these limitations, a new RP process called Segmented Object Manufacturing (SOM) is proposed in this paper. SOM makes use of three-axis kinematics in conjunction with a novel slicing method. Slicing in SOM is based on certain visibility-based considerations and is independent of the part accuracy. Since only a few thick layers are used in the SOM technique, a part can be produced faster and cheaper with an accuracy comparable to that of CNC machining.     

Multi-objective optimization of the ecm process

Optimization of process parameters is helpful in efficient working of the process and, hence, in lowering the cost of machining. Optimization of ECM process parameters has been achieved by considering only one objective at a time from metal removal rate, geometrical accuracy, and total process cost. From a practical point of view, a solution of the ecm problem satisfying all three objectives simultaneously is highly desirable.In the proposed model, a multi-objective problem involving the ecm process is formulated producing highly nonlinearized equations. These are then linearized by regression analysis and converted into a goal programming format. Finally, the problem is solved by the partitioning algorithm.It is concluded that the tool, or cathode, remains safe at the optimal values of design variables obtained in the examples discussed. The optimal value of voltage when metal removal rate is the only objective, is found to be higher than the case when the geometrical accuracy requirement is also to be satisfied.     

Structural,Electronic Properties,Hydrogen Bonding Analyses,and Biological Activity of Two Multiple Myeloma Drugs: Lenalidomide and Pomalidomide

In this article, we made a comparative study of two multiple myeloma drugs: lenalidomide and pomalidomide. We calculated and discussed their geometries at DFT/B3LYP method. Intra-molecular hydrogen bonding in these molecules is confirmed and characterized by QTAIM calculations. Electronic parameters along with HOMO-LUMO and MESP surfaces are calculated in order to compare their chemical reactivity. The effect of structure and bonding on electronic properties and biological activities is discussed and it is established that pomalidomide is more biologically active than lenalidomide. The phenyl ring of these molecules show teratogenic effects, making a possibility of finding another new class of drugs.     

Correlation between lattice strain and magnetic properties enhancement of nanocrystalline cobalt ferrite with controlled annealing

Journal of Materials Science: Materials in Electronics - Spinel cobalt ferrite (CoFe2O4) has been prepared using the citrate precursor sol–gel method. The synthesized samples have been...