Diameter of Single-Walled Carbon Nanotubes (SWCNTs) as an Effective Factor in the Detection and Degradation of PCBs

Polychlorinated biphenyls (PCBs) are chlorinated organic compounds and well known carcinogenic and toxic pollutants. Currently, their detection and degradation to products with less risk are among environmental and health priorities. Passing 2,2′,4,4′,5,5′-Hexachlorobiphenyl (PCB-153) through the armchair single-walled carbon nanotubes (SWCNTs) (8, 8) and (10, 10) was investigated by Modified Neglect of Diatomic Overlap in the semi-empirical method. The analysis of results suggests that there are meaningful changes in the middle of the tubes. Based on the obtained evidence, the nanotubes have substantial potential to interact with the PCB-153 molecule effectively. The results show that the increased diameter in the armchair SWCNTs improves the detection and degradation potential of the tube to PCBs. According to the calculated thermodynamic parameters, the diameter of nano-structures is an effective factor in PCBs removal efficiency, as it could be helpful to make a more sensitive PCB nano-sensor.     

Pitting and pitting control of Al in gluconic acid solutions - Polarization, chronoamperometry and morphological studies

The anodic behaviour of Al in gluconic acid (HG) solutions was studied. Al was found to pit in such solutions. Surface and cross-sectional views of the SEM images recorded beyond the breakdown potential (E_b) revealed the occurrence of intense pitting attack with the formation of large hemispherical pits. The effect of adding some environmentally acceptable inorganic inhibitors (tungstates, molybdates or silicates) on the pitting corrosion behaviour of Al in HG solutions was also studied. Measurements were carried out under the influence of various experimental variables based on polarization and chronoamperometric techniques. These measurements were complemented by ex situ scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) examinations of the electrode surface. The presence of these compounds in HG solutions decreased the passive current density (j_pass) and increased E_b. In HG solutions, chronoamperometric measurements showed that the anodic current density first decreased, due to growth of a passive oxide film, then increased with time after a pit incubation time, t_i and finally attained a steady-state value. Value of t_i was shortened and simultaneously the steady-state current was elevated, corresponding to an increase in the rate of pit initiation and growth, with increasing applied anodic potential and HG concentration. The rate of pit nucleation () was found to decrease to an extent depending on the type and concentration of the introduced inhibitor. The inhibitory effect of these compounds decreased in the order:  >  > .     

Preparation of polyaniline and studying its electrical conductivity

Polyaniline was prepared by chemical methods. Its electrical conductivity was measured. The electrical conductivity of polyaniline salt and polyaniline base were compared with composites prepared by the hot press of polyaniline base with KBr, Co(CH₃COO)₂, and picric acid. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1658–1665, 2000     

Synthesis of high metal‐complexation linear elastomers containing sym‐1,2,4,5‐tetrazine rings

We report the synthesis of polyurethane‐urea elastomers containing 1,2,4,5‐tetrazine covalently reacted within the main chains of the polymers. Our study investigates the synthesis of 3,6‐diamino‐1,2,4,5‐tetrazine (DAT), the polymerization reaction conditions for reacting DAT into the backbone of segmented polyurethane elastomers, and the metal‐complexation capabilities of tetrazine‐containing elastomers with cobalt (II) chloride. Tetrazines are highly colored and electro‐active heterocyclic moieties, which have a very high electron affinity which make them reducible at high to very high potentials. Upon complexation with metals, we observed a strong color shift of the polymers from deep red to blue indicating the binding efficacy for the polymers. We quantified the metal‐complexation capability of the tetrazine elastomers and determined a molar ratio of approximately two metal atoms per tetrazine allowing us to provide a plausible complexation mechanism for the active polymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

An Environmentally Benign,Highly Efficient Catalytic Reduction of p‐Nitrophenol using a Nano‐Sized Nickel Catalyst Supported on Silica‐Alumina

A green and effective method is reported for the reduction of p‐nitrophenol to p‐aminophenol using a nano‐sized nickel catalyst supported on silica‐alumina in the presence of hydrazine hydrate as an alternative source of hydrogen. It was found that nickel loaded on a silica‐alumina support is a very effective catalyst in the hydrogenation of p‐nitrophenol to p‐aminophenol. Thus it attained 100% conversion in only 69 seconds instead of 260 seconds for commercial Raney nickel. In addition, the possibility to reuse it more than one time with great efficiency gives it another advantage over commercial Rainey nickel which cannot be used more than once. This economical and environmentally friendly method provides a potentially new approach for the synthesis of the intermediate product of paracetamol in industry, which overcomes the drawbacks of the known reduction methods. The prepared catalysts were fully characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray (EDX), and electron spin resonance (ESR) tehniques.     

Melatonin Modulates Plant Tolerance to Heavy Metal Stress: Morphological Responses to Molecular Mechanisms

Heavy metal toxicity is one of the most devastating abiotic stresses. Heavy metals cause serious damage to plant growth and productivity, which is a major problem for sustainable agriculture. It adversely affects plant molecular physiology and biochemistry by generating osmotic stress, ionic imbalance, oxidative stress, membrane disorganization, cellular toxicity, and metabolic homeostasis. To improve and stimulate plant tolerance to heavy metal stress, the application of biostimulants can be an effective approach without threatening the ecosystem. Melatonin (N-acetyl-5-methoxytryptamine), a biostimulator, plant growth regulator, and antioxidant, promotes plant tolerance to heavy metal stress by improving redox and nutrient homeostasis, osmotic balance, and primary and secondary metabolism. It is important to perceive the complete and detailed regulatory mechanisms of exogenous and endogenous melatonin-mediated heavy metal-toxicity mitigation in plants to identify potential research gaps that should be addressed in the future. This review provides a novel insight to understand the multifunctional role of melatonin in reducing heavy metal stress and the underlying molecular mechanisms.     

Synthesis of Novel 2-Thiouracil-5-Sulfonamide Derivatives as Potent Inducers of Cell Cycle Arrest and CDK2A Inhibition Supported by Molecular Docking

In an effort to discover potent anticancer agents, 2-thiouracil-5-sulfonamides derivatives were designed and synthesized. The cytotoxic activity of all synthesized compounds was investigated against four human cancer cell lines viz A-2780 (ovarian), HT-29 (colon), MCF-7 (breast), and HepG2 (liver). Compounds 6b,d–g, and 7b showed promising anticancer activity and significant inhibition of CDK2A. Moreover, they were all safe when tested on WI38 normal cells with high selectivity index for cancer cells. Flow cytometric analysis for the most active compound 6e displayed induction of cell growth arrest at G1/S phase (A-2780 cells), S phase (HT-29 and MCF-7 cells), and G2/M phase (HepG2 cells) and stimulated the apoptotic death of all cancer cells. Moreover, 6e was able to cause cycle arrest indirectly through enhanced expression of cell cycle inhibitors p21 and p27. Finally, molecular docking of compound 6e endorsed its proper binding to CDK2A, which clarifies its potent anticancer activity.     

Thermal and morphological behavior of irradiated composite materials based on injection‐moulded recycled polyethylene terephthalate

The effect of gamma irradiation and short glass fiber (SGF) on the thermal and morphological behavior of the recycled poly (ethylene terephthalate) (rPET) in the presence of reactive additive (epoxy resin, 2 wt %) has been investigated. Characterization of the resulted composites to evaluate the effect of incorporation the SGF and irradiation by means of differential scanning calorimetry, X‐ray diffraction, thermal gravimetric analysis, and scanning electron microscopy (SEM). The results show that the SGF and epoxy resin behave as nucleating agents for the crystallization of rPET. A noticeable increase in the rPET thermal stability in the presence of both SGF and epoxy resin has been observed. Furthermore, the rPET melting temperature (T_m) slightly decrease in the presence of the SGF and remains nearly constant with the incorporation of the epoxy resin. On the other hand, the rPET crystallinity percent (X%) decreases in the presence of SGF and gamma irradiation. The SEM showed that a layer of epoxy resin was coated onto the SGF in the rPET matrix. This coating layer raises the interfacial shear strength between the fiber and polymer matrix and also increases with gamma irradiation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Factors influencing critical flux in membrane filtration of activated sludge

Membrane filtration of biomass is usually accompanied by significant flux decline due to cake‐layer formation and fouling. Crossflow filtration with flux controlled by pumping the permeate can produce stable fluxes if a ‘critical flux’ is not exceeded. Below critical flux the transmembrane pressure is typically very low and increases linearly with imposed flux. Above the critical flux the transmembrane pressure rises rapidly signifying cake‐layer formation which is usually accompanied by a continued rise in transmembrane pressure and/or a drop in delivered flux. A range of microfiltration and ultrafiltration membranes with pore sizes from 0.22 to 0.65 µm and molecular weight cut‐off of 100 kDa was used. The feed was an activated sludge mixed liquor with concentration in the range of 3–10 g dm⁻³. The results show that the critical flux depends on feed concentration and crossflow velocity, being higher for higher crossflow velocity or lower feed concentration. Critical flux was also dependent on membrane type, being lower for hydrophobic membranes. Although the transmembrane pressure was higher for the larger pore size membrane, no significant difference in critical flux was observed among different pore size membranes. © 1999 Society of Chemical Industry     

Semisynthetic Latrunculin Derivatives as Inhibitors of Metastatic Breast Cancer: Biological Evaluations,Preliminary Structure–Activity Relationship and Molecular Modeling Studies

The microfilament cytoskeleton protein actin plays an important role in cell biology and affects cytokinesis, morphogenesis, and cell migration. These functions usually fail and become abnormal in cancer cells. The marine‐derived macrolides latrunculins A and B, from the Red Sea sponge Negombata magnifica, are known to reversibly bind actin monomers, forming 1:1 stoichiometric complexes with G‐actin, disrupting its polymerization. To identify novel therapeutic agents for effective treatment of metastatic breast cancer, several semisynthetic derivatives of latrunculin A with diverse steric, electrostatic, and hydrogen bond donor and acceptor properties were rationally prepared. Analogues were designed to modulate the binding affinity toward G‐actin. Examples of these reactions are esterification, acetylation, and N‐alkylation. Semisynthetic latrunculins were then tested for their ability to inhibit pyrene‐conjugated actin polymerization, and subsequently assayed for their antiproliferative and anti‐invasive properties against MCF7 and MDA‐MB‐231 cells using MTT and invasion assays, respectively.