Me-DLC films as material for highly sensitive temperature compensated strain gauges

In technical applications strain gauges are widely used. Apart from conventional polymer foil based strain gauges that are glued to the work piece surface, sputtered strain gauges are already commercially used in special applications. Those sputter strain gauges are typically made of NiCr alloy and the sensor layer is as sensitive to strain as the ones used in the glued strain gauges with a gauge factor of 2, but neglecting problems of creeping and swelling of the involved polymer materials. Diamond-like carbon (DLC) films offer significantly higher strain sensitivity, but usually they are also very sensitive to temperature effects. Using metal doped diamond-like carbon (Me-DLC), higher strain sensitivity than conventional metal based systems, in combination with thermal compensation, is possible. The influence of different process parameters on the gauge factor and temperature coefficient of resistance (TCR) of DLC and Me-DLC films produced in industrial sputtering systems was investigated. Gauge factors up to 13 in combination with a high negative TCR in the range of a few thousand ppm/K were reached with sputtered DLC films. The substrate bias voltage in particular showed a strong influence on the resulting gauge factor of the films. For Me-DLC films different deposition methods (dc and rf sputtering) and various doping metals (Ag, Ni, Ti, and W) were investigated. Using dc sputtering of the Me-DLC films only Ni-DLC showed gauge factors slightly higher than 2. Furthermore, only for Ni-DLC zero crossing of the TCR was observed by variation of the metal content. Using rf excitation especially Ni-DLC films showed gauge factors exceeding values of 15 in combination with a TCR close to zero.     

Photolytic crosslinking of poly(p-hydroxystyrene)

Light-induced crosslinking of poly(p-hydroxystyrene) (PPHS) is significantly enhanced by O₂. This was evidenced by molar mass (light scattering measurements) and by gel content determinations which were performed on various polymer samples before and after continuous irradiation at λ_inc = 254 nm. The following mechanism was elucidated with the aid of flash photolysis studies: Crosslinking in the absence or presence of O₂ is mainly due to the combination of phenoxyl type radicals. In the absence of O₂ the latter are exclusively formed by O? H bond cleavage of singlet excited phenolic groups. Triplet excited phenolic groups which are also formed do not deactivate via O? H bond cleavage but react very effectively with O₂. This reaction leads to the formation of HO and additional phenoxyl type radicals. All Commercial and most laboratory-prepared PPHS samples contain chemically bound impurities of quinoid nature. On the basis of results performed with model compounds of low molar mass, it is concluded that triplet excited quinoid groups react effectively with phenolic groups forming phenoxyl type radicals and that they are quite unreactive with respect to the abstraction of alphatic hydrogen atoms. Irradiation of PPHS at λ_inc = 254 nm causes the formation of quinoid groups which absorb strongly at this wavelength. Light absorption by these groups becomes a determining factor with respect to photochemical alteration in the course of further irradiation.     

Effect of Melt Processing on Crystallization Behavior and Rheology of Poly(3‐hydroxybutyrate) (PHB) and its Blends

Poly(3‐hydroxybutyrate) (PHB) is sensitive to high processing temperatures. This leads to a decrease in molar mass as well as a lower melt viscosity. The crystallization temperature shifts to lower values, and crystallization kinetics is slow. A mixture was developed in order to improve the manufacturing properties and the final product. The blends exhibit a slight reduction in molar mass because they have a lower melting point than pure PHB, and can be extruded at their melt temperature of 170 to 180°C. Then they immediately crystallize at 125 to 100°C. Differential scanning calorimetry (DSC) shows the effect of holding time in the melt on crystallization behavior. It has been shown that the crystallization time has to be longer in the case of PHB and shorter for the blends. Thermal degradation of PHB and its blends has been investigated using thermogravimetry analysis (TG). Derivative thermogravimetry coupled with TG (TG/DTG) curves show three decomposition stages for blends at 290, 340 and 445°C, respectively. Acetic acid, water, carbon dioxide and methane are produced by degradation at a higher temperature.     

电厂蒸汽回路系统中腐蚀损伤的决定论预测

局部腐蚀,包括点腐蚀、应力腐蚀开裂和腐蚀疲劳是导致电厂发电装置损伤的重要原因,它们诱发50%以上的意外停机事故。迄今,腐蚀破坏的预测一直沿用经验和统计的方法,但是,由于已证实该方法的适用性和其结果的准确性欠佳,故不宜作为例行检修规程的基础。本文提出了预测局部腐蚀损伤的决定论方法,并使用这个方法说明点腐蚀如何引发低压蒸汽轮机涡轮盘Wilson线下游部位的应力腐蚀开裂(SCC),我们的计算表明SCC的萌发与扩展对蒸汽小氧含量、冷凝液膜的环境和涡轮盘所承受的应力这三个因素敏感。     

STUDY OF K_(2)O·6TiO_(2) WHISKER REINFORCED AI COMPOSITES FOR THEIR MECHANICAL PROPERTIES AND INTERFACIAL STRUCTURES

A newly developed whisker K_2O 6TiO_2 reinforeed 6061Al composite was prepared bysqueeze casting process.The flexural strength of the composite is 518MPa,and deereasesto 490MPa after T6 treatment.The hardness of the composite also shows the similarchange while T6 treating.The results of HRTEMobservation may explaine this property.change.It was considered that there is a continuous TiO layer at the whisker-matrix inter-face,which is easily to react with the segregated Mg and to form MgTi_2O_4,MgAl_2O_4.Thethickening of TiO layer after T6 treatment is the main reason resulting is strength degra-dation of composite.     

Kinetics of water adsorption in microporous aluminophosphate layers for regenerative heat exchangers

The performance of thick aluminophosphate molecular sieve layers for heat exchanger applications is evaluated. The aluminophosphate AlPO-18 (AEI structure type code) molecular sieve sorbent is coated on aluminium supports prior the sorption measurements. Two AlPO-18 samples with different morphological appearance, i.e. nano-sized crystals with monomodal size distribution and micron-sized crystals of varying sizes, are used to prepare layers with thickness in the range of 80–750 μm. As a binder component, polyvinyl alcohol (PVOH) was utilized in order to prepare mechanically stable layers, which are mechanically stable over numerous measuring cycles. The sorption measurements are conducted under canonical conditions at 40 °C. The AlPO-18 layers showed decreased mass flows with increasing the thickness. Additionally, the layers comprising nanosized crystals showed higher equilibrium loadings and faster kinetics compared to films based on micron-sized crystals. Following the kinetic studies of pressure, temperature and heat flow, it can be concluded that the heat transport is the rate limiting mechanism for thick aluminophosphate layers. Importantly, the diffusion limitation plays a role only for relatively thin microporous aluminophosphate layers (<200 μm). Below this thickness complete heat transfer is achieved within 2 min which allows fast heat exchanger cycles. Thus, the application of microporous aluminophosphate layers for heat transformation and storage applications is considered possible.     

Selection of single-nucleotide polymorphisms and quality of genotypes used in genomic evaluation of dairy cattle in the United States and Canada

Nearly 57,000 single-nucleotide polymorphisms (SNP) genotyped with the Illumina BovineSNP50 BeadChip (Illumina Inc., San Diego, CA) were investigated to determine usefulness of the associated SNP for genomic prediction. Genotypes were obtained for 12,591 bulls and cows, and SNP were selected based on 5,503 bulls with genotypes from a larger set of SNP. The following SNP were deleted: 6,572 that were monomorphic, 3,213 with scoring problems (primarily because of poor definition of clusters and excess number of clusters), and 3,649 with a minor allele frequency of <2%. Number of SNP for each minor allele frequency class (≥2%) was fairly uniform (777 to 1,004). For 5 contiguous SNP assigned to chromosome 7, no bulls were heterozygous, which indicated that those SNP are actually on the nonpseudoautosomal portion of the X chromosome. Another 178 SNP that were not assigned to a chromosome but that had many fewer heterozygotes than expected were also assigned to the X chromosome. Existence of Hardy-Weinberg equilibrium was investigated by comparing observed with expected heterozygosity. For 11 SNP, the observed percentage of heterozygous individuals differed from the expected by >15%; therefore, those SNP were deleted. For 2,628 SNP, the genotype at another SNP was highly correlated (i.e., genotypes were identical for >99.5% of bulls), and those were deleted. After edits, 40,874 SNP remained. A parent-progeny conflict was declared when the genotypes were alternate homozygotes. Mean number of conflicts was 2.3 when pedigree was correct and 2,411 when it was incorrect. The sire was genotyped for >93% of animals. Maternal grandsire genotype was similarly checked; however, because alternate homozygotes could be valid, a conflict threshold of 16% was used to indicate a need for further investigation. Genotyping consistency was investigated for 21 bulls genotyped twice with differences primarily from SNP that were not scored in one of the genotypes. Concordance for readable SNP was extremely high (99.96-100%). Thousands of SNP that were polymorphic in Holsteins were monomorphic in Jerseys or Brown Swiss, which indicated that breed-specific SNP sets are required or that all breeds need to be considered in the SNP selection process. Genotypes from the Illumina BovineSNP50 BeadChip are of high accuracy and provide the basis for genomic evaluations in the United States and Canada.     

Cholera in Portugal, 1974.I. Modes of transmission

In April-November 1974, Portugal had a cholera epidemic caused by Vibrio cholerae El Tor Inaba with 2467 bacteriologically confirmed hospitalized cases and 48 deaths. Most of the country was affected, with 17 of the 18 districts reporting cases. V. cholerae was isolated from 42 per cent of shellfish tested during the epidemic, and an epidemiologic study found that a history of consumption of raw or poorly cooked cockles was significantly more common among cholera patients than among paired controls. Water from a spring and a brand of commercially bottled water were also found to be vehicles of transmission of cholera. Although night soil was sometimes used on gardens, consumption of raw fruits and vegetables was not associated with illness.     

The Canter Background Interference Procedure (BIP): effects of demographic variables on diagnosis

This paper reports a positive association between demographic variables and Canter BIP diagnostic classification. Ss are 209 middle-aged men and include psychiatric and medical patients and non-patients. To evaluate the joint effects of the demographic variables, a discriminate analysis was performed on the total sample. Race and educational level alone predicted BIP diagnosis in 67% of the cases. While none of the demographic variables was related significantly to BIP diagnosis when a discriminate analysis was performed on whites alone, age and educational level were related significantly to BIP diagnosis when a discriminate analysis was performed on blacks alone.