Performance evaluation of endrills

This paper evaluates the performance of a relatively new type of drill called an endrill which is a cross between a drill and an endmill. Investigations into the effects of its cutting conditions on the drilling forces, surface finish, drill wear and hole oversize were carried out. It was found that endrills produced better quality holes than conventional twist drills, better surface finish and less oversize of the holes. Hence, with proper feed, speed and flow rate of the pressurized flushing coolant, a good finish of about R_a = 1 μm can be attained without reaming. Thus, the productivity of finished holes can be remarkably improved. Compared to twist drills, lower torque and thrust were observed which yielded improved tool life and reduced power consumption. No “walking phenomenon” was observed when this kind of drill was used and the amount of hole oversize was found to average about 0.7% of the drill diameter as compared to 1.6% when twist drills were used. Finally, general equations for the drill torque and thrust were derived from the experimental results.     

Overlapping melodic alarms are almost indiscriminable

OBJECTIVE: We explore how accurately and quickly nurses can identify melodic medical equipment alarms when no mnemonics are used, when alarms may overlap, and when concurrent tasks are performed. BACKGROUND: The international standard IEC 60601-1-8 (International Electrotechnical Commission, 2005) has proposed simple melodies to distinguish seven alarm sources. Previous studies with nonmedical participants reveal poor learning of melodic alarms and persistent confusions between some of them. The effects of domain expertise, concurrent tasks, and alarm overlaps are unknown. METHOD: Fourteen intensive care and general medical unit nurses learned the melodic alarms without mnemonics in two sessions on separate days. In the second half of Day 2 the nurses identified single alarms or pairs of alarms played in sequential, partially overlapping, or nearly completely overlapping configurations. For half the experimental blocks nurses performed a concurrent mental arithmetic task. RESULTS: Nurses' learning was poor and was no better than the learning of nonnurses in a previous study. Nurses showed the previously noted confusions between alarms. Overlapping alarms were exceptionally difficult to identify. The concurrent task affected response time but not accuracy. CONCLUSION: Because of a failure of auditory stream segregation, the melodic alarms cannot be discriminated when they overlap. Directives to sequence the sounding of alarms in medical electrical equipment must be strictly adhered to, or the alarms must redesigned to support better auditory streaming. APPLICATION: Actual or potential uses of this research include the implementation of IEC 60601-1-8 alarms in medical electrical equipment.     

Electronically tunable external-cavity laser diode using a liquid crystal deflector

A novel external-cavity wavelength tunable laser based on a liquid crystal (LC) deflector is proposed. This device consists of a gain chip, collimating lens, LC deflector, and diffraction grating. By controlling the voltage applied to the LC deflector, a maximum wavelength variation of 12 nm and a sidemode suppression ratio higher than 30 dB are obtained.     

Analysis of demand‐priority access using a priority queue with server vacations and message dependent switchover times

In this paper, we analyse the message waiting times in a local area network (LAN) that uses the demand‐priority access method. This is a priority‐based round‐robin arbitration method where the central controller (the repeater) polls its connected ports to determine which have transmission requests pending and the requests' priority classes. We model it as a 2‐priority M/G/1 queue with multiple server vacations and switchover time between service periods. The service discipline is nonpreemptive and the length of the switchover time is dependent upon the priority class of the preceding message served as well as that of the message to be served next. We provide an approximate analysis for the waiting times of both message classes and derive expressions for the Laplace–Stieltjes transforms (LST) of the stationary distributions and the mean waiting times. We conclude with numerical and simulation results to show the applicability and accuracy of the analytical model. This revised version was published online in June 2006 with corrections to the Cover Date.     

Design and performance analysis of MAC schemes for Wireless Sensor Networks Powered by Ambient Energy Harvesting

Energy consumption is a perennial issue in the design of wireless sensor networks (WSNs) which typically rely on portable sources like batteries for power. Recent advances in ambient energy harvesting technology have made it a potential and promising alternative source of energy for powering WSNs. By using energy harvesters with supercapacitors, WSNs are able to operate perpetually until hardware failure and in places where batteries are hard or impossible to replace. In this paper, we study the performance of different medium access control (MAC) schemes based on CSMA and polling techniques for WSNs which are solely powered by ambient energy harvesting using energy harvesters. We base the study on (i) network throughput (S), which is the rate of sensor data received by the sink, (ii) fairness index (F), which determines whether the bandwidth is allocated to each sensor node equally and (iii) inter-arrival time (γ) which measures the average time difference between two packets from a source node. For CSMA, we compare both the slotted and unslotted variants. For polling, we first consider identity polling. Then we design a probabilistic polling protocol that takes into account the unpredictability of the energy harvesting process to achieve good performance. Finally, we present an optimal polling MAC protocol to determine the theoretical maximum performance. We validate the analytical models using extensive simulations incorporating experimental results from the characterization of different types of energy harvesters. The performance results show that probabilistic polling achieves high throughput and fairness as well as low inter-arrival times.     

Performance evaluation of cryogenically treated tungsten carbide tools in turning

This paper describes a study on the effects of cryogenic treatment of tungsten carbide. Cryogenic treatment has been acknowledged by some as a means of extending the tool life of many cutting tool materials, but little is known about the mechanism behind it. Thus far, detailed studies pertaining to cryogenic treatment have been conducted only on tool steels. However, tungsten carbide cutting tools are now in common use. The main aim of this study is to analyze the differences in tool performance between cryogenically treated and untreated tool inserts during orthogonal turning of steel. This will aid in the quest for optimal cutting conditions for the turning of steel using these inserts, and will also enhance the understanding of the mechanism behind the cryogenic treatment of tungsten carbide, and the changes in its properties after cryogenic treatment. In the process of ascertaining these findings, it was shown in this study that under certain conditions, cryogenic treatment can be detrimental to tool life and performance. It was also shown that cryogenically treated tools perform better while performing intermittent cutting operations.     

On Helmholtz and higher-order resonance of twin floating bodies

The Helmholtz mode and other symmetric modes of resonance of a moonpool between two heaving rectangular floating cylinders are investigated. The hydrodynamic behavior around these resonant modes is examined together with the associated mode shapes in the moonpool region. It is observed that near each of the resonance frequencies, the damping coefficient can vanish. The Helmholtz mode is characterized by a region of modest variation of added-mass value from negative to positive near the Helmholtz frequency. The peaks are, however, bounded with the cross-over point in sign corresponding to a bounded spike in damping. The higher-order resonant modes are characterized by the presence of standing waves in the moonpool, which leads to large spikes in the hydrodynamic behavior near the resonance frequencies. The Helmholtz frequency has a distinct value, while the higher-order resonances occur at fairly regular intervals of the frequency parameter, σ²(w ? b)/g, where w ? b is the moonpool gap. The parametric dependence of the hydrodynamic behavior on frequency and geometry is discussed. With best wishes to my colleague and good friend, Nick Newman, on the occasion of his 70th birthday. A leader and staunch supporter of marine hydrodynamics, Nick has expanded the reach and influence of this field through his insights and publications. His contributions have been wide-ranged and his graciousness to young researchers is exemplary. May he enjoy the best of health in the years to come. R.W. Yeung      

Hyperendemicity associated with increased dengue burden

Over 105 million dengue infections are estimated to occur annually. Understanding the disease dynamics of dengue is often difficult due to multiple strains circulating within a population. Interactions between dengue serotype dynamics may result in complex cross-immunity dynamics at the population level and create difficulties in terms of formulating intervention strategies for the disease. In this study, a nationally representative 16-year time series with over 43 000 serotyped dengue infections was used to infer the long-run effects of between and within strain interactions and their impacts on past outbreaks. We used a novel identification strategy incorporating sign-identified Bayesian vector autoregressions, using structural impulse responses, historical decompositions and counterfactual analysis to conduct inference on dengue dynamics post-estimation. We found that on the population level: (i) across-serotype interactions on the population level were highly persistent, with a one time increase in any other serotype associated with long run decreases in the serotype of interest (range: 0.5–2.5 years) and (ii) over 38.7% of dengue cases of any serotype were associated with across-serotype interactions. The findings in this paper will substantially impact public health policy interventions with respect to dengue.