Improving TDMA Channel Utilization in Random Access Cognitive Radio Networks by Exploiting Slotted CSMA

This paper aims to improve the spectrum efficiency of the licensed time division multiple access (TDMA) channel by exploiting the unused periods of primary users (PUs) in cognitive radio networks. A wireless network that consists of two classes of users, PUs and CR users, accessing a time slotted based common communication channel is considered. PUs employ TDMA and have always high priority over the CR users to access the channel. CR users utilize slotted Carrier Sense Multiple Access and can access the channel when it is not occupied by the PUs. New expressions for the throughput of both CR network and overall network have been derived in order to evaluate the channel utilization. Besides, an example network have been developed, modeled and simulated by using the OPNET Modeler simulation software with the purpose of verifying the analytical throughput results. The simulation results obtained under various network load conditions are consistent with the analytical results. This study has also proposed that the overall channel utilization can be improved by well exploiting the spectrum holes without interfering with the PU transmissions.     

Functionalization of low molecular weight atactic polypropylenePart I. Spectroscopic studies

Summary Low molecular weight atactic polypropylene (APP) was functionalized with 4-allyl-2-methoxyphenol (eugenol), 4-allyl-1,2-dimethoxybenzene (DMAB), 4-propenylanisole(trans-anethole), cis-2,4,5-trimethoxypropenylbenzene (β-asarone) and 4-allyl-2,6-dimethoxyphenol (ADMP) in the presence of dicumyl peroxide (DCP) at 170°C. Amount of grafted eugenol, DMAB and anethole on APP and characterization of the products were carried by UV-VIS and FTIR spectroscopies respectively. The effects of the reaction time, concentrations of the functional compounds and DCP on the extent of grafting were examined. Received: 8 June 1999/Revised version: 31 August 1999/Accepted: 31 August 1999     

A New Active Micro-Mixing Strategy

An active micro-mixing strategy through forcing the flow by synthetic wall jets is proposed. It is based on the interaction of induced streamwise vortices in a specific way. There is a spanwise shift between two quasi-streamwise vortices in such a way that one of them compresses the wall normal vorticity layer created by the other, leading to the generation of new wall normal vortical structures. The latter are subsequently tilted by the shear to give birth to new small-scale longitudinal active structures that are efficient in mixing. The feasibility of this strategy is shown through direct numerical simulations of high spatial and temporal resolution.     

A novel permission-based Android malware detection system using feature selection based on linear regression

Neural Computing and Applications - With the developments in mobile and wireless technology, mobile devices have become an important part of our lives. While Android is the leading operating system...     

Detailed analysis on thermal,microstructural, mechanical,and morphological features of side chain liquid crystalline polymer/isotactic polypropylene graft copolymers: Effect of grafted and ungrafted polymer units

The main scope of this comprehensive study is to investigate the effects of poly(p-benzophenoneoxycarbonylphenyl acrylate), poly(BPOCPA), which presenting as only graft units or both graft and ungrafted units in the matrix, on the fundamental features of isotactic polypropylene (IPP). The graft copolymerization of BPOCPA onto IPP was performed with the aid of bulk melt polymerization at varying monomer content levels ranging from 5% to 40%. The thermal behavior, crystal quality, mechanical performance, and surface morphology of the samples were investigated by means of differential scanning calorimeter, X-ray diffractometer (XRD), universal mechanical test, and scanning electron microscope (SEM) techniques. Thermal analyses depicted that there existed the noteworthy enhancements in both crystalline melting temperatures and percent crystallinities of matrix polymers. Furthermore, according to XRD results, a and b parameters increased significantly at low percentages of the graft units, while the parameter c decreased in all products in consistence with the content. As for the mechanical characterization, the grafting led to remarkable improvements in modulus, tensile and impact strength of the products. SEM micrographs indicated that the samples were completely homogeneous without any phase separation and the products exhibited brittle nature with some ductility.     

Estimation of target station data using satellite data and deep learning algorithms

In this study, an innovative model has been developed for wind speed estimation through the Deep Learning method using hourly wind speed data from the measurement stations of the General Directorate of Meteorology in Van and Hakkari provinces in Turkey in conjunction with simultaneous satellite images from Eumetsat. Obtained satellite images were used during the introduction of the model, while wind speed data were used at the output stage. As a result of the findings, it was found that 85% accuracy performance could be achieved to provide sufficient insight for systems that are widely established worldwide. The model, developed as a result of the study, eliminates the need to install wind measuring stations for any region on earth within the satellite field in terms of determining wind potential. Since the field of view of the Meteosat 7 satellite covers the whole of Eastern Europe, it was determined that it could predict a high rate of up to 6 hours later by the method used in image analysis. The systems to be controlled with this method will be able to examine the weather events instantly at each point in the satellite field of view and make more accurate decisions. Also, companies will be able to perform a more detailed and rapid field scan compared to existing limited methods, and reduce initial investment costs and operating costs in terms of renewable energy resources investments.     

Investigation of hybrid‐capacitor properties of ruthenium complexes

Ru complexes were successfully produced, and their structural properties were investigated using FTIR, Raman, and single crystal XRD patterns. The HOMO, LUMO, Eg, and electronic surface potential (ESP) values of the molecules were calculated by a Gaussian program. The complexes were used for producing hybrid capacitor cells as electrode materials. According to electrochemical analysis, complex 2 showed the best CV graph between ?1 V and +1 V and had the highest current value and hysteresis area when compared with the other complexes. The performance analysis and the capacity fade of the cells were investigated. The first capacity values of the complexes were 57.5, 22.1, 16.9, and 0.0021 F/g for complexes 1 , 2 , 3 , and 4 , respectively. The capacitive mechanism of the cells as relates to molecular interactions was also investigated. We suggested that the ESP values of the molecules were directly related to the capacitive performance of the cells. In addition to this, the best cycling performance was obtained for complex 2, which has the lowest Eg value among the complexes. We speculate that the charged regions on the complex materials have a crucial role in the increasing the capacitance of the cells.     

Microtubule nucleation by gamma-tubulin-containing rings in the centrosome

The microtubule cytoskeleton of animal cells does not assemble spontaneously, but instead requires the centrosome. This organelle consists of a pair of centrioles surrounded by a complex collection of proteins known as the pericentriolar material (PCM). The PCM is required for microtubule nucleation. The minus, or slow-growing, ends of microtubules are embedded in the PCM and the plus, or fast-growing, ends project outwards into the cytoplasm during interphase, or into the spindle apparatus during mitosis. gamma-Tubulin is the only component of the PCM that is so far implicated in microtubule nucleation. Here we use immuno-electron microscopic tomography to show that gamma-tubulin is localized in ring structures in the PCM of purified centrosomes without microtubules. When these centrosomes are used to nucleate microtubule growth, gamma-tubulin is localized at the minus ends of the microtubules. We conclude that microtubule-nucleating sites within the PCM are ring-shaped templates that contain multiple copies of gamma-tubulin.