Enrichment of (8,4) Single‐Walled Carbon Nanotubes Through Coextraction with Heparin

Heparin sodium salt is investigated as a dispersant for dispersing single‐walled carbon nanotubes (SWNTs). Photoluminescence excitation (PLE) spectroscopy is used for identification and abundance estimation of the chiral species. It is found that heparin sodium salt preferentially disperses larger‐diameter Hipco SWNTs. When used to disperse CoMoCAT nanotube samples, heparin has a strong preference for (8,4) tubes, which have larger diameter than the predominant (6,5) in pristine CoMoCAT samples. PLE intensity due to (8,4) tubes increases from 7% to 60% of the total after threefold extractions. Computer modeling verifies that the complex of (8,4) SWNTs and heparin has the lowest binding energy amongst the four semiconducting species present in CoMoCAT. Network field‐effect transistors are successfully made with CoMoCAT/heparin and CoMoCAT/sodium dodecylbenzene sulfonate (SDBS)–heparin (x3), confirming the easy removability of heparin.     

Detection of Methomyl,a Carbamate Insecticide,in Food Matrices Using Terahertz Time-Domain Spectroscopy

The aim of this study was to investigate the feasibility of detecting methomyl, a carbamate insecticide, in food matrices (wheat and rice flours) using terahertz time-domain spectroscopy (THz-TDS). In the frequency range 0.1–3 THz, the characteristic THz absorption peaks of methomyl at room temperature were detected at 1 (33.4 cm^?1), 1.64 (54.7 cm^?1), and 1.89 (63.0 cm^?1)?THz. For detailed spectral analysis, the vibrational frequency and intensity of methomyl were calculated using solid-state density functional theory to mimic molecular interactions in the solid state. Qualitatively, the simulated spectrum was in good agreement with the experimental spectrum. Analysis of the individual absorption modes revealed that all of the features in the THz spectrum of methomyl were mainly generated from intermolecular vibrations. The peak appearing at 1 THz (33.4 cm^?1) was then selected and tested for its suitability as a fingerprint for detecting methomyl in food matrices. Its absorbance was dose-dependently distinguishable from that of wheat and rice flours. The calibration curve of methomyl had a regression coefficient of >0.974 and a detection limit of <3.74 %. Accuracy and precision expressed as recovery and relative standard deviation in interday repeatability were in the ranges 78.0–96.5 and 2.83–4.98 %, respectively. Our results suggest that THz-TDS can be used for the rapid detection of methomyl in foods, but its sensitivity needs to be improved.     

Parametric Instability Boundaries for Spatial Subharmonics in Photorefractive Moving Gratings: Theory and Experiments

We have derived a nonlinear spatiotemporal differential equation for spacecharge fields from Kukhtarev's material equations in a moving coordinate system and obtained the spatial subharmonic instability boundaries by using linear stability analysis. It is also found that there is an analogy between the temporal subharmonic and the spatial subharmonc instabilities in the sense that the governing differential equations describing the instability boundaries are formally identical. The experiments for generating spatial subharmonic waves are performed in a photorefractive Bi₁₂SiO₂₀ crystal by using conventional moving grating technique. The threshold detunings are experimentally determined and the results are compared with the theory.     

<Emphasis Type="Italic">Lactobacillus acidophilus</Emphasis> fermented yam (<Emphasis Type="Italic">Dioscorea opposita</Emphasis> Thunb.) and its preventive effects on gastric lesion

This study was carried out to find the possibility of fermenting yam (Dioscorea opposita Thunb.) with Lactobacillus acidophilus and the protective role on stomach lesion of rats. The solutions of raw and extracted yam used were 2 and 6%, and they were fermented by L. acidophilus at 37°C for 0, 12, 24, and 36 h. At intervals (0, 12, 24, and 36 h), viscosity, titratable acidity (TA), allantoin, and diosgenin were examined. In the results, it was observed the most desirable data at 12 h with 6% fermented raw yam (FRY) without any change in the content of allantoin and diosgenin. In the animal study by rats (Sprague-Dawley), the inhibition ratios on gastric lesion were 53.41% in FRY. Based on these data, it confirmed that raw yam powder fermented by L. acidophilus would be a functional food with the supplement of viable cells and nutraceutical component of allantoin and diosgenin.     

Fabrication of a pilot scale module of thin film composite hollow fiber membrane for osmotic pressure‐driven processes

Polyamide thin film composite hollow fiber membranes have advantages in their unique structure compared to flat sheet membranes. This study examined interfacial polymerization methods for fabricating pilot scale hollow fiber membranes (membrane area: 1.2 m², number of hollow fiber strands: 1200). For use in osmotic pressure‐driven processes, a one‐pot hydrophilic interfacial polymerization procedure was developed simultaneously to modify the surface property and synthesize polyamide thin film. With the procedure, a pilot scale module has a water flux of 13 LMH using a draw solution of 0.6M NaCl and a feed solution of distilled water through the design of the module configuration. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46110.     

Optimal Checkpoint Placement on Real-Time Tasks with Harmonic Periods

This paper presents an optimal checkpoint strategy for fault-tolerance in real-time systems where transient faults occur in Poisson distribution. In our environment, multiple real-time tasks with different deadlines and harmonic periods are scheduled in the system by rate-monotonic algorithm, and checkpoints are inserted at a constant interval in each task. When a fault is detected, the system carries out rollback to the latest checkpoint and re-executes tasks. The maximum number of re-executable checkpoints and an equation to check schedulability are derived, and the optimal number of checkpoints is selected to maximize the probability of completing all the tasks within their deadlines.     

Photocatalytic degradation of methylene blue and acetaldehyde by TiO<Subscript>2</Subscript>/glaze coated porous red clay tile

Nanosized TiO₂ sol synthesized by sol-gel method was successfully coated on the porous red clay tile (PRC tile) with micrometer sized pores. PRC tile was first coated with a low-firing glaze (glaze-coated PRC tile) and then TiO₂ sol was coated on the glaze layer. A low-fired glaze was prepared at various blending ratios with frit and feldspar, and a blending ratio glazed at 700 °C was selected as an optimum condition. Then TiO₂ sol synthesized from TTIP was dip-coated on the glazed layer (TiO₂/glaze-coated PRC tile), and it was calcined again at 500 °C. Here, these optimum calcination temperatures were selected to derive a strong bonding by a partial sintering between TiO₂ sol particles and glaze layer. Photocatalytic activity on the TiO₂/glaze-coated PRC tile was evaluated by the extent of photocatalytic degradation of methylene blue and acetaldehyde. Methylene blue with the high concentration of 150 mg/l on the surface of TiO₂/glaze-coated PRC tile was almost photodegraded within 5 hours under the condition of average UV intensity of 0.275 mW/cm₂, while no photodegradation reaction of methylene blue occurred on the glaze-coated PRC tile without TiO₂. Another photocatalytic activity was also evaluated by measuring the extent of photocatalytic degradation of gaseous acetaldehyde. The photodegradation efficiency in TiO₂/glaze-coated PRC tile showed about 77% photocatalytic degradation of acetaldehyde from 45,480 mg/l to 10,536 mg/l after the UV irradiation of 14 hours, but only about 16% in the case of the glaze-coated PRC tile.     

Reducing the operation temperature of a solid oxide fuel cell using a conventional nickel-based cermet anode on dimethyl ether fuel through internal partial oxidation

Dimethyl ether (DME)-oxygen mixture as the fuel of an anode-supported SOFC with a conventional nickel-cermet anode for operating at reduced temperatures is systematically investigated. The results of the catalytic tests indicate that sintered Ni-YSZ has high activity for DME partial oxidation, and DME conversion exceeds 90% at temperatures higher than 700 °C. Maximum methane selectivity is reached at 700 °C. Cell performance is observed between 600 and 800 °C. Peak power densities of approximately 400 and 1400 mW cm⁻² at 600 and 800 °C, respectively, are reached for the cell operating on DME-O₂ mixture. These values are comparable to those obtained using hydrogen as a fuel, and cell performance is reasonably stable at 700 °C for a test period of 340 min. SEM results demonstrate that the cell maintains good geometric integrity without any delimitation of respective layer after the stability test, and EDX results show that carbon deposition occurrs only at the outer surface of the anode. O₂-TPO analysis shows that carbon deposition over the Ni-YSZ operating on DME is greatly suppressed in the presence of oxygen. Internal partial oxidation may be a practical way to achieve high cell performance at intermediate-temperatures for SOFCs operating on DME fuel.     

Poly(lactic acid) blends with desired end-use properties by addition of thermoplastic polyester elastomer and MDI

The disadvantages of the poor mechanical properties of polylactic acid (PLA) limit its ability to be used in a wide number of applications. Melt blending of PLA and thermoplastic polyester elastomer (TPEE) has been performed in an effort to toughen the PLA without significant losses in modulus and ultimate tensile strength. In order to enhance the compatibility of PLA and TPEE, a diisocyanate compound was used as a reactive modifier. The thermal and mechanical properties, miscibility and phase morphologies of the blends were investigated. A blend of PLA and TPEE with a modifier does not lead to an important drop in tensile strength and modulus whereas the elongation at break is characterized by a significant increase (above 300%), compared with that of neat PLA and PLA/TPEE. The blends of PLA/TPEE/Modifier were found by thermal and fractured surface analysis to be an immiscible system with the addition of a modifier. However, the relative ductility of PLA/TPEE/Modifier is 34 times higher than that of neat PLA. The brittle fracture of neat PLA was transformed into a ductile fracture by the addition of a modifier.     

Preparation and evaluation of poly(2-hydroxyethyl aspartamide)-hexadecylamine-iron oxide for MR imaging of lymph nodes

The purpose of this study was to synthesize biocompatible poly(2-hydroxyethyl aspartamide)–C₁₆-iron oxide (PHEA-C₁₆-iron oxide) nanoparticles and to evaluate their efficacy as a contrast agent for magnetic resonance imaging of lymph nodes. The PHEA-C₁₆-iron oxide nanoparticles were synthesized by coprecipitation method. The core size of the PHEA-C₁₆-iron oxide nanoparticles was about 5 to 7 nm, and the overall size of the nanoparticles was around 20, 60, and 150 nm in aqueous solution. The size of the nanoparticles was controlled by the amount of C₁₆. The 3.0-T MRI signal intensity of a rabbit lymph node was effectively reduced after intravenous administration of PHEA-C₁₆-iron oxide with the size of 20 nm. The in vitro and in vivo toxicity tests revealed the high biocompatibility of PHEA-C₁₆-iron oxide nanoparticles. Therefore, PHEA-C₁₆-iron oxide nanoparticles with 20-nm size can be potentially useful as T2-weighted MR imaging contrast agents for the detection of lymph nodes.