Optimization of asymmetric spur gear drives to improve the bending load capacity

In a given size of symmetric involute gear designed through conventional approach, as the load carrying capacity is restricted at the higher pressure angle due to tipping formation, the use of the asymmetric toothed gear to improve the fillet capacity in bending is examined in this study. Non-standard asymmetric rack cutters with required pressure angles and module are developed to generate the required pinion and gear of a drive with asymmetric involute surfaces and trochoidal fillet profiles. The respective profiles thus generated are optimized for balanced fillet stresses that are equal and possibly the lowest also. For this study of optimization, several non-standard asymmetric rack cutters are designed to accommodate different combinations in the values of pressure angle, top land thickness ratio, profile shift, speed ratio and the asymmetric factors. However for any drive with a given center distance and a speed ratio, only two non-standard asymmetric rack cutters, one for the pinion and other for the gear are used to generate a required numbers of pinion and gear with different cutter shift values for the purpose of optimization. The influence of these parameters on the maximum fillet stress has been analyzed to suggest the optimum values of these parameters that improve the fillet capacity in bending. The optimization of the asymmetric spur gear drive is carried out using an iterative procedure on the calculated maximum fillet stresses through FEM for different rack cutter shifts and finally the optimum values of rack cutter shifts are suggested for the given center distance and the speed ratio of an asymmetric gear drive. Comparisons have also been made successfully with the results of the AGMA and the ISO codes for symmetric gears to justify the results of the finite element method pertaining to this study.     

A new equation of state to predict S-CO<Subscript>2</Subscript> flow with real gas effects

The accuracy of the thermodynamic properties prediction from the different Equation of state (EOS) varies upon the range of temperature and pressure. Despite the variety of EOS available, there is no de facto for selecting an EOS for particular computational modeling. The EOS model recently developed by Kumar and Kim (K-K EOS) determines more accurately the thermodynamic properties of CO₂ than earlier models. In this present study, K-K EOS is successfully implemented in the computational analysis of compressible supercritical CO₂ flow (S-CO₂) in the thermodynamic region near and away from the vapour-liquid critical point. Computational results of SCO₂ flow with the real gas properties predicted with the K-K EOS is compared with Span and Wagner (SW EOS) and ideal EOS.     

Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method

This paper reports a research in which an attempt was made to prepare AC2A aluminium alloy castings of a non symmetrical component through squeeze casting process. The primary objective was to investigate the influence of process parameters on mechanical properties of the castings. Experiments were conducted based on orthogonal array suggested in Taguchi’s offline quality control concept. The experimental results showed that squeeze pressure, die preheating temperature and compression holding time were the parameters making significant improvement in mechanical properties. The optimal squeeze casting condition was found and mathematical models were also developed for the process.     

Combustion analysis of Jatropha methyl esters and Pongamia methyl esters with the addition of ethanol as fuel in a diesel engine

The aim of our project is to experimentally access the practical applications of ethanol and blending it with some lubricating oils in a direct injection compression ignition engine. This replacement of conventional diesel with ethanol requires some of the properties of ethanol to be altered. In order to increase the lubricating property of ethanol, it is blended with some lubricating oils. Some of the preferred lubricating oils are methyl esters of Jatropha oil, Pongamia oil, etc. Ethanol is blended with these lubricating oils to reduce the corrosive property of ethanol. The different fuel blends [Pongamia–ethanol (50–50) and Jatropha–ethanol (50–50)] are used in the direct injection CI engine, the combustion characteristics are calculated and they are compared with diesel and a perfect blend is analysed. The engine combustion parameters such as peak pressure, heat release rate (HRR) and cumulative heat release rate were computed. The combustion analysis revealed that the early rate of pressure rise causes the cylinder pressure to rise early in the case of alternate fuels with a resulting lower rate of pressure rise and peak pressure. However, HRR and cumulative HRR show a maximum for Pongamia–ethanol (50–50) when compared with the neat diesel fuel.     

Experimental analysis of the effects of cerium oxide nanoparticles on a single-cylinder diesel engine using biofuel blended with diesel as fuel

Energy demand is the hot topic of all developing and developed countries. Energy demand has been increasing day by day at a high rate. So, it is necessary to find an alternative solution that is eco-friendly. Biodiesel can be the alternative solution for this problem. The main purpose of this paper is to test the engine performance and emission parameters of a diesel engine using pure cinnamon oil blended with diesel and using cerium oxide as a catalyst. The parameters measured are brake power, brake thermal efficiency, specific fuel conception, CO₂, CO, NO_x and HC.     

Carbon nanotube-DNA nanoarchitectures and electronic functionality

Biological molecules such as deoxyribonucleic acid (DNA) possess inherent recognition and self-assembly capabilities, and are attractive templates for constructing functional hierarchical material structures as building blocks for nanoelectronics. Here we report the assembly and electronic functionality of nanoarchitectures based on conjugates of single-walled carbon nanotubes (SWNTs) functionalized with carboxylic groups and single-stranded DNA (ssDNA) sequences possessing terminal amino groups on both ends, hybridized together through amide linkages by adopting a straightforward synthetic route. Morphological and chemical-functional characterization of the nanoarchitectures are investigated using scanning electron microscopy, transmission electron microscopy, atomic force microscopy, energy-dispersive X-ray spectroscopy, Raman spectroscopy, and Fourier-transform infrared spectroscopy. Electrical measurements (I-V characterization) of the nanoarchitectures demonstrate negative differential resistance in the presence of SWNT/ssDNA interfaces, which indicates a biomimetic route to fabricating resonant tunneling diodes. I-V characterization on platinum-metallized SWNT-ssDNA nanoarchitectures via salt reduction indicates modulation of their electrical properties, with effects ranging from those of a resonant tunneling diode to a resistor, depending on the amount of metallization. Electron transport through the nanoarchitectures has been analyzed by density functional theory calculations. Our studies illustrate the great promise of biomimetic assembly of functional nanosystems based on biotemplated materials and present new avenues toward exciting future opportunities in nanoelectronics and nanobiotechnology.     

Quantum dot sensitized aluminium doped and copper doped ZnO nanostructure based solar cells

Aluminium doped and copper doped ZnO nanostructured thin films have been prepared using simple solgel dip coating method. The X-ray diffraction pattern results revealed that the prepared Al and Cu doped ZnO sample exhibits hexagonal structure. The average crystallite size of pure ZnO, Al doped ZnO and Cu doped ZnO samples were found to be 29, 26 and 15 nm, respectively. The optical band gap of ZnO, Al doped ZnO and Cu doped ZnO thin films was found to be 3.27, 3.29, and 3.20 eV respectively. Solar cells have been fabricated using CdS quantum dots sensitized ZnO nanostructured thin films and the efficiency of the fabricated Al doped and Cu doped ZnO solar cells were 1.37 and 1.29 % respectively.     

Dye-sensitized solar cells with natural dyes extracted from rose petals

Nanocrystalline TiO₂ dye-sensitized solar cells have been fabricated using TiO₂ photoelectrode sensitized using the extracts of red rose and table rose as natural sensitizers and their characteristics have been studied. The extracts having anthocyanin pigment (pelargonidin, peonidin and cyanidin), which have hydroxyl and carboxylic groups in the molecule can attach effectively to the surface of TiO₂ film. The solar cell constructed using the red rose sensitized TiO₂ photo-electrode exhibited a short-circuit photocurrent of 4.57 mA/cm² and a power conversion efficiency of 0.81 % and that of table rose sensitized TiO₂ photo-electrode exhibited a short-circuit photocurrent of 4.23 mA/cm² and a power conversion efficiency of 0.67 %. Natural dye sensitized TiO₂ photo electrodes present the prospect to be used as an environment-friendly, low-cost alternative system.     

Chryseobacterium meningosepticum in a parapneumonic effusion in a chronic kidney disease patient on hemodialysis

Chryseobacterium meningosepticum is an uncommon human pathogen, which is an inhabitant of soil and water. It should be included in the list of suspected nosocomial infections, especially in patients with immunocompromised status. C. meningosepticum infections are not common but are clinically important because the organism is naturally resistant to multiple antibiotics. We report a case where the bacterium was isolated from the pleural fluid from a chronic kidney disease patient on hemodialysis, who developed pneumonia with complicated parapneumonic effusion. To the best of our knowedge, this is the first case where C. meningosepticum is isolated from the pleural effusion, from India.     

Flow injection analysis of an ultratrace amount of arsenite using a Prussian blue-modified screen-printed electrode

We report here a new electrochemical method for the selective detection of ultratrace amount of arsenite (AsO(2)(-), As(3+)) using a Prussian blue-modified screen-printed electrode (designated as PBSPE) by flow injection analysis (FIA) in 0.1 M, pH 4 KCl/HCl carrier solution. The Prussian yellow/Prussian blue redox couple of the PBSPE was found to mediate the As(3+) oxidation. Various factors influencing the determination of As(3+) were thoroughly investigated in this study. Under the optimized FIA conditions, a linear calibration plot in the range of 50 nM-300 microM with a detection limit (S/N = 3) of 25 nM (i.e., 64.9 pg in 20-microL loop) was observed at an operation potential of +0.6 V vs Ag/AgCl. The sensitivity was good enough to detect arsenite at levels lower than the current EPA standard. This modified electrode showed good resistance to interference from common ions, especially Cl(-), which is generally considered as a major interference in the determination of As(3+) by ICPMS. The practical utility of the PBSPE to detect As(3+) was demonstrated in "blackfoot" disease endemic village groundwater from the southwestern coast area of Taiwan (Pei-Men).