Characterization and preparation of new multiwall carbon nanotube/conducting polymer composites by in situ polymerization

Composites based on poly(diphenyl amine) (PDPA) and multiwall carbon nanotubes (MWNTs) were prepared by chemical oxidative polymerization through two different approaches: in situ polymerization and intimate mixing. In in situ polymerization, DPA was polymerized in the presence of dispersed MWNTs in sulfuric acid medium for different molar composition ratios of MWNT and DPA. Intimate mixing of synthesized PDPA with MWNT was also used for the preparation of PDPA/MWNT composites. Transmission electron microscopy revealed that the diameter of the tubular structure for the composite was 10–20 nm higher than the diameter of pure MWNT. Scanning electron microscopy provided evidence for the differences in the morphology between the MWNTs and the composites. Raman and Fourier transform IR (FTIR) spectroscopy, thermogravimetric analysis, X‐ray diffraction, and UV–visible spectroscopy were used to characterize the composites and reveal the differences in the molecular level interactions between the components in the composites. The Raman and FTIR spectral results revealed doping‐type molecular interactions and coordinate covalent‐type interactions between MWNT and PDPA in the composite prepared by in situ polymerization and intimate mixing, respectively. The backbone structure of PDPA in the composite decomposed at a higher temperature (>340°C) than the pristine PDPA (～300°C). This behavior also favored the molecular level interactions between MWNT and PDPA in the composite. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3721–3729, 2006     

A timing controller embedded driver IC with 3.24‐Gbps eDP interface for chip‐on‐glass TFT‐LCD applications

This paper presents a timing controller embedded driver (TED) IC with 3.24‐Gbps embedded display port (eDP), which is implemented using a 45‐nm high‐voltage CMOS process for the chip‐on‐glass (COG) TFT‐LCD applications. The proposed TED‐IC employs the input offset calibration scheme, the zero‐adjustable equalizer, and the phase locked loop‐based bang‐bang clock and data recovery to enhance the maximum data rate. Also, the proposed TED‐IC provides efficient power management by supporting advanced link power management feature of eDP standard v1.4. Additionally, the smart charge sharing is proposed to reduce the dynamic power consumption of output buffers. Measured result demonstrates the maximum data rate of 3.24 Gbps from a 1.1 V supply voltage with a 7.9‐inch QXGA 60‐Hz COG‐LCD prototype panel and 44% power saving from the display system.     

A secure image encryption scheme based on chaotic maps and affine transformation

Due to the interesting nonlinear dynamic properties of chaotic maps, recently chaos-based encryption algorithms have gained much attention in cryptographic communities. However, many encryption schemes do not fulfil the minimum key space requirement, which is an essential concern in many secure data applications. In this paper, an efficient chaos-based image encryption scheme with higher key space is presented. Even with a single round of encryption, a significantly larger key space can be achieved. The proposed scheme removes correlation among image pixels via random chaotic sequences, simply by XOR and addition operations. In order to resist against numerous attacks, we apply the affine transformation to get the final ciphertext image. The security of the proposed scheme is proved through histogram, contrast, PSNR, entropy, correlation, key space, key sensitivity and differential attack analysis. Many significant properties of chaotic maps, sensitivity to initial condition and control parameters, structure and attack complexity, make the anticipated scheme very reliable, practical and robust in various secure communication applications.     

A study on effects of security risks on acceptance of enterprise cloud service: moderating of employment and non-employment using PLS multiple group analysis

This paper analyzed the effects of security risk factors fit for cloud computing paradigm on the acceptance of enterprise cloud service with intent to illuminate the factors for vitalizing the adoption of corporate cloud services in the future. The acceptance intention was set as a dependent variable. Independent variables were set in reference to the technology acceptance theory. Security risks were categorized into compliance risk, information leakage risk, troubleshooting risk and service discontinuation risk to design a model for analysis.     

Automated classification of touching or overlapping M-FISH chromosomes by region fusion and homolog pairing

Automated separation and classification of touching or overlapping chromosomes in a metaphase image is a critical step in computer-aided chromosome analysis. The advent of the multiplex fluorescence in situ hybridization (M-FISH) technology enables multi-spectral chromosome image with rich spectral information and DAPI image with abundant texture information. This paper presents a fusion classification scheme to improve the segmentation of overlapping and touching chromosomes. First, the texture and spectral information is fused to partition the chromosome cluster into a series of homologous regions. Then a graph-theoretical classification and pairing method is proposed to resolve any remaining ambiguity of the aforementioned separation process. Experiment results demonstrate that the proposed method outperforms conventional multi-spectral classification methods in touching and overlapping chromosome separation.     

Low level light therapy by Red–Green–Blue LEDs improves healing in an excision model of Sprague–Dawley rats

There are many methods of healing wounds. Among these, light therapy is reported to be beneficial, as beams assist the human body in treating, sterilizing, and regenerating cells. Both Laser and LED irradiation with specific wavelengths induce proliferation of fibroblasts depending on the wound area or wavelength and are effective in wound healing. This study used 8-week-old 250–300 g Male Sprague–Dawley Rats (ILAR Code: NTacSam:SD). The experiment was carried out for the non-irradiation group and the Red–Green–Blue LEDs irradiation groups (n of each group = 5). The experiment animals were relieved for 24 h after wounds had been excised and then the Red–Green–Blue LEDs irradiation groups were given irradiation therapy over 9 days 1 h per day. Immunohistochemical staining was conducted for cytokeratin in order to precisely measure the defect size. Also, Masson’s trichrome staining was conducted for comparison of collagen between the Red–Green–Blue LEDs irradiation groups and the non-irradiation group. Animals treated with Blue LEDs irradiation (p < 0.05), Green LEDs irradiation (p < 0.05), and Red LEDs irradiation (N.S.) healed at a faster rate than non-irradiated group. The LEDs irradiated groups also had more collagen, according to Masson’s trichrome staining for collagen analysis. The Red–Green–Blue LEDs irradiation had a beneficial effect on wound healing and could probably replace low power laser treatment.     

A study of roll‐printing technology for TFT‐LCD fabrication

Abstract— Recently, potential breakthrough technologies for low‐cost processing of TFT‐LCDs and new process developments for flexible‐display fabrication have been widely studied. A roll‐printing process using etch‐resist material as a replacement for photolithographic patterning was investigated. The characterization of the properties of patterns formed in roll printing, a method to fabricate cliché plates for fine patterns, and the design of a new formulation for resist printing ink is reported. The pattern position accuracy, which is one of the most important issues for the successful application of printing processes in display manufacturing was studied and how it can be improved by optimizing the blanket roll structure is explained. New design rules for the layout of the thin‐film‐transistor array was derived to improve the compatibility of roll printing. As a result, a prototype 15‐in.‐XGA TFT‐LCD panel was fabricated by using printing processes to replace all the photolithographic patterning steps conventionally used.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Adaptive IIR/FIR fusion filter and its application to the INS/GPS integrated system

Motivated by the complementary features of the IIR-type filter and the FIR-type filter, this paper proposes a robust IIR/FIR fusion filter and an INS/GPS integrated system designed with the fusion filter. In the fusion filter, an IIR-type filter (SPKF) and a FIR-type filter (MRHKF filter) are processed independently, and then the two filters are merged using the mixing probability calculated using the residuals and residual covariance information of the two filters. The merits of the SPKF and the MRHKF filter are integrated and the demerits of the filters are diminished through the filter fusion. Consequently, the proposed fusion filter shows robustness against model uncertainty, temporary disturbing noise, large initial estimation error, etc. The stability of the fusion filter is verified by showing the closeness of two filters in the mixing/redistribution process and the upper bound of the error covariance matrices. This fusion filter is applied to an INS/GPS integrated system. The performance of the INS/GPS integrated system designed using the fusion filter is verified through a simulation under various error environments and is experimentally confirmed.     

Effect of deposition temperature on dielectric properties of PECVD Ta2O5 thin film

Tantalum oxide film formation by plasma-enhanced chemical vapour deposition (PECVD) using TaCl₅ as a source material was examined. The effects of deposition temperature on the formation, structure and electric properties of the Ta₂O₅ film were investigated for Al/Ta₂O₅/ p-Si (MTS) capacitors. The deposition rate and refractive index increased with increasing deposition temperature. It was found that the structure of Ta₂O₅ deposited by PECVD was amorphous as-deposited. However, crystalline -Ta₂O₅ of hexagonal structure was formed by a 700 °C, 1 h heat treatment in argon. Capacitance and relative dielectric constant of the PECVD Ta₂O₅ were found to be 2.54 fF m^–2 and 23.5, respectively. The PECVD films obtained in this study have higher dielectric constants and remarkably better general film characteristics than those obtained by other deposition methods.