Abnormal junction profile of silicided p+/n shallowjunctions: a leakage mechanism

The leakage mechanism in p⁺/n shallow junctions fabricated using Co silicidation and shallow trench isolation processes has been investigated using transmission electron microscopy (TEM) combined with selective chemical etching. TEM and TSUPREM-4 simulation results show that dopant profiles bend upward near the edge of the active region. The formation of the abnormal profile is attributed to transient enhanced diffusion induced by source/drain implantation. Based on the TEM and simulation results, it is suggested that the shallower junctions formed near the active edge can serve as a source for leakage current in the silicided p+ /n shallow junctions     

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

ZnO thin film was deposited on various metal electrodes by reactive sputtering, and c-axis preferred orientation of the film has been studied. ZnO, which has high piezoelectricity, is promising for oscillators or filter devices such as surface acoustic wave (SAW) device, gas sensor, and film bulk acoustic resonator (FBAR). But, for the application of ZnO film for these devices, the film should be grown with c-axis normal to the electrode. In this study, Pt, Al, and Au were deposited on Si wafer, and the surface roughness and crystal structure of the ZnO film on the electrode were investigated using AFM, scanning electron microscopy (SEM), and X-ray diffraction (XRD). Columnar structures of ZnO films were grown with c-axis normal to all electrodes, and among them Pt electrode showed the highest preferred orientation of ZnO film.     

Major internal nuclear matrix proteins are common to different human cell types

Cancer invasion and metastasis are associated with matrix degradation. We describe a novel in vivo model of invasion by squamous epithelial neoplastic cells derived from transgenic mice grown on acellular human dermis. Human dermis was subjected to multiple freeze-thaw cycles to render it acellular, maintaining the basement membrane of the former dermal-epidermal junction. Cells representing discrete stages of a multistep transgenic mouse model of epidermal carcinogenesis (neonatal transgenic keratinocytes, moderately/poorly differentiated squamous cell carcinoma, and lymph node metastasis) were seeded onto the basement membrane surface, grown in culture for 4 days, grafted in a subpannicular pocket of athymic mice, and harvested after 3 weeks. Histological analysis demonstrated that neonatal transgenic keratinocytes did not degrade the basement membrane or invade the underlying dermis. In contrast, malignant cells derived from both a moderately differentiated squamous carcinoma and a lymph node metastasis were highly invasive. Immunohistochemical analysis revealed collagenase only in nests of invading malignant cells in contact with the dermal matrix, but not in the tumor mass remaining above the basement membrane, suggesting that this proteinase may be required for stromal invasion. This novel model recapitulates the events seen in malignant invasion: transgenic keratinocytes are unable to penetrate the dermis while cells from a moderately differentiated carcinoma and from lymph node metastasis consistently invade.     

An accurate and practical buffer allocation model for the buffer cache based on marginal gains

A new dynamic buffer allocation strategy based on the notion of marginal gains is presented for the buffer cache that is used by the operating system to store frequently accessed disk blocks in main memory, and the performance of the proposed strategy is compared with those of previous allocation strategies. In the proposed strategy, marginal gain values are predicted by exploiting functions that approximate the expected number of buffer hits per unit time. Experimental results from both trace-driven simulation and an actual implementation in the FreeBSD operating system show that the proposed strategy accurately predicts the marginal gain values for various workloads resulting in significantly improved buffer hit ratios.     

掺杂铁电纳米粉的液晶的电光特性

铁电纳米粒子悬浮在向列相液晶母体中，增强介电各向异性，而且对施加的电场信号敏感。本文也展示了纳米粒子对所述复合材料可实现的总的相变的作用。这种方法也许可应用于设计新型显示材料。     

Trenched‐Sinker LDMOSFET (TS‐LDMOS) Structure for 2 GHz Power Amplifiers

This paper proposes a new LDMOSFET structure with a trenched sinker for high‐power RF amplifiers. Using a low‐temperature, deep‐trench technology, we succeeded in drastically shrinking the sinker area to one‐third the size of the conventional diffusion‐type structure. The RF performance of the proposed device with a channel width of 5 mm showed a small signal gain of 16.5 dB and a maximum peak power of 32 dBm with a power‐added efficiency of 25% at 2 GHz. Furthermore, the trench sinker, which was applied to the guard ring to suppress coupling between inductors, showed an excellent blocking performance below ?40 dB at a frequency of up to 20 GHz. These results confirm that the proposed trenched sinker should be an effective technology both as a compact sinker for RF power devices and as a guard ring against coupling.     

A practical SPICE model based on the physics and characteristics of realistic single-electron transistors

A practical model for a single-electron transistor (SET) was developed based on the physical phenomena in realistic Si SETs, and implemented into a conventional circuit simulator. In the proposed model, the SET current calculated by the analytic model is combined with the parasitic MOSFET characteristics, which have been observed in many recently reported SETs formed on Si nanostructures. The SPICE simulation results were compared with the measured characteristics of the Si SETs. In terms of the bias, temperature, and size dependence of the realistic SET characteristics, an extensive comparison leads to good agreement within a reasonable level of accuracy. This result is noticeable in that a single set of model parameters was used, while considering divergent physical phenomena such as the parasitic MOSFET, the Coulomb oscillation phase shift, and the tunneling resistance modulated by the gate bias. When compared to the measured data, the accuracy of the voltage transfer characteristics of a single-electron inverter obtained from the SPICE simulation was within 15%. This new SPICE model can be applied to estimating the realistic performance of a CMOS/SET hybrid circuit or various SET logic architectures.     

Synthesis of ultrafine LiCoO2 powders by the sol-gel method

Ultrafine high-temperature (HT) LiCoO₂ powders were synthesized by the sol-gel method using polyacrylic acid (PAA) as a chelating agent. The decomposition process of the gel precursor was examined to determine the crystallization temperature and the dependence of the physicochemical properties of HT-LiCoO₂ powders on the PAA quantity was extensively investigated. Polycrystalline HT-LiCoO₂ powders, composed of very uniformly sized ultrafine particulates with an average particle size of 30–50 nm and a specific surface area of 2.3–17 m²g^–1, could be obtained at the lower calcination temperature of 550 °C and the shorter calcination time of 1 h compared to the solid-state reaction.     

Droplet de-entrainment by inertial impaction on vertical rods in an air-droplet mixture flow

We experimentally investigate the de-entrainment of droplets by inertial impaction on an array of vertical rods in an air-droplet mixture flow. The de-entrainment efficiencies are measured for a single rod, for a single row of rods, and for a multi-row of rods. We investigate the effects of the droplet mass flux (0.5–5.4 kg/m² s), the droplet Weber number (3000–8000), the air velocity (0–6 m/s), the rod geometry, and the surface roughness on the de-entrainment, and the rod diameter-to-pitch ratio effect on the de-entrainment. The results for a single rod show that the de-entrainment efficiency decreases slightly as the droplet mass flux increases; however, in our experimental ranges, there is negligible dependence on the droplet Weber number, the air velocity, and the surface roughness. The rod geometry affects the de-entrainment efficiency. The results for a single row of rods show that the existence of neighboring rods promotes de-entrainment due to droplet splashing, and we develop a correlation to show the effect of diameter-to-pitch ratio on the de-entrainment. Using information on the de-entrainment efficiencies of a single rod and those of a single row of rods, we propose a correlation that predicts the de-entrainment efficiency for a multi-row of rods with a staggered array. The RMS errors of the correlation from the de-entrainment efficiencies experimentally obtained are within 13.5%.     

Recurrent hyperparathyroidism due to parathyroid autografts: incidence, presentation, and management

Recurrent hyperparathyroidism (HPT) occurs in a small percentage of patients undergoing parathyroidectomy for primary HPT and is usually due to inadequate excision of hyperfunctioning parathyroid tissue in the neck, a missed ectopic and hyperplastic parathyroid, or, less commonly, parathyroid carcinoma and parathyroid autografts. In order to determine the incidence, clinical characteristics, and outcome of patients with recurrent HPT due to parathyroid autografts, we reviewed our experience with 604 consecutive patients operated on for primary HPT between 1965 and 1989. One hundred of these patients received parathyroid autografts consisting of portions of one or more parathyroid glands. Three patients with autografts, placed in the sternocleidomastoid muscle, developed recurrent HPT due to their autografts for an incidence of 3 per cent. Recurrent disease was diagnosed between 62 and 113 months with an average of 89 months. The autotransplants in all three of these patients were from hyperplastic or adenomatous parathyroid tissue. Two patients had a history of neck irradiation. Preoperative thallium scans accurately localized the hyperfunctioning parathyroid tissue in all three patients. At operation, the hyperfunctioning autografts had grown into a discrete mass with a single vascular pedicle and were resected. Histologic examination disclosed either hyperplastic or adenomatous tissue, and corresponded to the histology and location of the original tissue transplanted in each case. Follow-up ranges from 12 to 67 months, with an average of 48 months. All patients remain cured and none require oral calcium supplementation. We conclude that graft-dependent recurrent HPT is due to the autotransplantation of hyperplastic or adenomatous parathyroid tissue and that thallium scanning is instrumental for diagnosis and localization.(ABSTRACT TRUNCATED AT 250 WORDS)