Removal of formaldehyde at low concentration using various activated carbon fibers

Adsorption of low concentration formaldehyde on pitch‐based, rayon‐based, and PAN‐based activated carbon fibers (ACFs) and an unactivated PAN‐based carbon fiber (PAN‐CF) was investigated by a dynamic method. The pore structure and surface chemistry of these samples were characterized by liquid nitrogen adsorption, elemental analysis, and X‐ray photoelectron spectroscopy. Results revealed that the pore structure, especially surface chemical composition, greatly influence the formaldehyde adsorption. PAN‐based ACFs showed the highest formaldehyde adsorption capacity because there are more abundant nitrogen‐containing groups, especially pyrrolic, pyridonic, pyridinic, and quaternary on the surface. The breakthrough time and formaldehyde adsorption capacity of one kind of PAN‐ACF were 361 min and 0.478 mmol/g, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Preparation of microporous chlorinated poly(vinyl chloride) membrane in fabric and the characterization of their pore sizes and pore‐size distributions

Chlorinated poly(vinyl chloride) (CPVC)/poly(vinyl pyrrolidone) (PVP) membranes were prepared by using the solvent system tetrahydrofuran (THF)/n‐butyl alcohol (n‐BA) to investigate the possibility of pore size and pore‐size distribution control. The coagulation of CPVC/PVP solution was induced by the exposure to water vapor at 25 (±0.5)°C. The average pore diameter, d_p, and the size distribution of pores on the surface of the membrane were quantified through the image analyzer from the images visualized by field emission scanning electron microscope (FE‐SEM). Surface pore size and distribution of the prepared CPVC/PVP membrane were strongly affected by the relative humidity (RH) in the environment and the content of PVP used as an additive. Particularly, in the case of CPVC membrane without PVP, the mean pore size was 0.15–0.2 μm, depending on the RH. The pore distribution became broad with the increase of the RH. The membranes had open pores as confirmed by the hydraulic permeation experiment. In addition, the water flux and membrane resistance (R_m) were greatly affected by the composition of polymer solution and the RH. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1195–1202, 2002     

Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

Electrical properties of (Bi3.5La0.5)Ti3O12 thin-films prepared by liquid source misted chemical deposition

The ((Bi_3.5La_0.5)Ti₃O₁₂(BLT) thin-films used in this study were fabricated on a Pt(111)/SiO₂/Si(100) substrate by a Liquid Source Misted Chemical Deposition (LSMCD) technique. X-ray diffraction patterns showed that the BLT films were crystallized and no other phases were observed when annealed above 650 ‡C. Grain size and remnant polarizations increased with increase in the annealing temperature, while leakage current densities decreased. The remnant polarizations (Pr) increased from 2.0 to 4.8 and 19.0 μC/cm2 with increase in the annealing temperature from 650 to 700 and 750 ‡C, respectively. The BLT films annealed at 700 ‡C in O₂ showed a good fatigue resistance of reduced polarization by 10% after 10⁹ switching cycles when 9 V of bipolar voltage was applied at a frequency of 40 kHz.     

Model algorithmic control of grade change operations in paper mills

In this work, the Model Algorithmic Control (MAC) method is applied to control the grade change operations in paper mills. The neural network model for the grade change operations is identified first and the impulse model is extracted from the neural network model. Results of simulations for MAC control of grade change operations are compared with plant operation data. The major contribution of the present work is the application of MAC in the industrial plants based on the identification of neural network models. We can confirm that the proposed MAC method exhibits faster responses and less oscillatory behavior compared to the plant operation data in the grade change operations.     

On-line identification of interacting two-tank system

In order to demonstrate the effectiveness of the process identification algorithm, on-line parameter estimator is evaluated experimentally by using two-tank system with interaction. On-line parameter estimator used in this paper is based on a recursive parameter estimation algorithm. MIMO linear, bilinear and quadratic models based on ARMA model are used to identify two-tank system. A quadratic model for two-tank system with interaction is developed to confirm the propriety of MIMO quadratic model used in identification of two-tank system. The results of on-line identification experiments on the two-tank system show that the estimated parameters of each model converge and the output tracking errors are bounded by disturbance bound. But, the quadratic model showed the best convergence.     

Measurement and modeling solubility of bioactive coumarin and its derivatives in supercritical carbon dioxide

To design a supercritical fluid extraction process for the separation of bioactive substances from natural products, a quantitative knowledge of phase equilibria between target biosolutes and solvent is necessary. How-ever, mostly no such information is available in literature to date. Thus in the present study, illustratively the solubility of bioactive coumarin and its various derivatives (i.e., hydroxy-, methyl-, and methoxy-derivatives) in supercritical CO₂ were measured at 308.15–328.15 K and 10–30 MPa. Also, the pure physical properties such as normal boiling point, critical constants, acentric factor, molar volume and standard vapor pressure for coumarin and its derivatives were estimated. By these estimated information, the measured solubilities were quantitatively correlated by an approximate lattice equation of state proposed recently by the present authors.     

Rearrangement of the main chain of the organocobalt polymers

The polymers 3 having pyridine moieties in the main chain were synthesized by the reaction of the organocobalt polymers 1 having cobaltacyclopentadiene moieties in the main chain with various nitriles 2. When brown colored 1 and excess 2 were heated in tetrahydrofuran at 80 °C for 24 h and then at 150 °C for 12 h in a sealed tube, the polymers 3 were obtained by the precipitation with methanol in good yields. From the spectroscopic measurements, the resulting polymers 3 were found to contain 35 – 90% of the pyridine moieties depending on the structures of 1. Received: 7 July 1997/Revised: 14 August 1997/Accepted: 25 August 1997     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003