Design and Analysis of a Permanent Magnet Spherical Actuator

This paper has proposed a 3-DOF spherical actuator consisting of a ball-shaped rotor with a full circle of permanent- magnet (PM) poles and a spherical-shell-like stator with two layers of circumferential air-core coils. One key feature of this design is the parametrization of PM and coil poles. Based on the torque model of the PM spherical actuator, the relationship between poles' parameters and torque output can be demonstrated. As a result, the actuator design aiming at achieving maximum torque output can be carried out from the relationships. Another advantage of this spherical actuator is its singularity-free workspace, which is verified with the actuator torque model and condition numbers.     

A gain-clamped SOA with distributed Bragg reflectors fabricated under both ends of active waveguide with different lengths

We demonstrate a gain-clamped semiconductor optical amplifier (GC-SOA) which has gratings under both end regions of an active waveguide. Two gratings of the new GC-SOA are fabricated in different lengths. Their lasing modes and gain characteristics are measured and analyzed with different combinations of grating lengths. It shows different gain and noise characteristics according to the measurement direction in asymmetric grating combinations.     

Characterization of the Ultrathin HfO2 and Hf-Silicate Films Grown by Atomic Layer Deposition

The physical properties of HfO₂ and Hf-silicate layers grown by the atomic layer chemical vapor deposition are characterized as a function of the Hf concentration and the annealing temperature. The peaks of Fourier transform infrared spectra at 960, 900, and 820 cm_-1 originate from Hf-O-Si chemical bonds, revealing that a Hf-silicate interfacial layer began to form at the HfO₂/SiO ₂ interface after post deposition annealing process at 600 degC for 1 min. Moreover, the intensity of the peak at 750 cm^-1 can indicate the degree of crystallization of HfO₂. The formed Hf-silicate layer between HfO² and SiO² is also confirmed by X-ray photoelectron spectroscopy     

Cyanate Ester-Based Encapsulation Material for High-Temperature Applications

Cyanate ester resin-based composite materials have been proposed as potential encapsulants for high-temperature applications. The objective of this study is to develop a cyanate ester-based encapsulant, which can also serve as a flip-chip underfill as well as for traditional encapsulation. Two different materials, quartz and alumina fillers, have been studied. The impact of shapes and sizes of the fillers on the overall thermomechanical properties has been investigated. The adhesion strengths of the materials to the ceramic substrate, Kovar lid, and silicon die have also been characterized. The modulus of the resin and the shape of the fillers play a pivotal role in minimizing thermal stress, generated by coefficient of thermal expansion mismatches. Smaller filler particles were found to have better adhesion to the cyanate ester resin. The high-temperature performance of the cyanate ester-based encapsulants was evaluated by thermal aging at 300°C for up to 500 h.     

Improved Bounds on the $L(2,1)$-Number of Direct and Strong Products of Graphs

The frequency assignment problem is to assign a frequency which is a nonnegative integer to each radio transmitter so that interfering transmitters are assigned frequencies whose separation is not in a set of disallowed separations. This frequency assignment problem can be modelled with vertex labelings of graphs. An $L(2,1)$-labeling of a graph $G$ is a function $f$ from the vertex set $V(G)$ to the set of all nonnegative integers such that $vert f(x)-f(y)vertgeq 2$ if $d(x,y)=1$ and $vert f(x)-f(y)vertgeq 1$ if $d(x,y)=2$ , where $d(x,y)$ denotes the distance between $x$ and $y$ in $G$. The $L(2,1)$ -labeling number $lambda(G)$ of $G$ is the smallest number $k$ such that $G$ has an $L(2,1)$-labeling with $max{f(v):vin V(G)}=k$. This paper considers the graph formed by the direct product and the strong product of two graphs and gets better bounds than those of KlavŽar and Špacapan with refined approaches.      

Mode selective interpolation for stereoscopic 3D video in frame-compatible top-bottom packing

As a transition stage from a conventional 2D TV to a full stereoscopic 3D TV system, a frame-compatible format of fitting stereoscopic left and right images to a single frame of the existing 2D TV is required to utilize existing codec and transmission infrastructure. To meet this requirement, a frame-compatible top-bottom packing with a horizontal line offset is proposed, where the vertical resolutions of the stereoscopic left and right images are reduced by half. Then, the optimal interpolation mode for each line segment of the sub-sampled horizontal line is determined by exploiting parallax-compensated data as well as undeleted neighboring upper and lower horizontal lines. At the receiver, the discarded horizontal lines for the left and right images are reconstructed by the interpolation modes provided by the sender. Experimental results show that the proposed algorithm improves the PSNR as much as 1.5–3dB comparing to conventional interpolation filters.     

Bend,Twist, and Turn: First Bendable and Malleable Toughened PLA Green Composites

The future of green electronics possessing great strength and toughness proves to be a promising area of research in this technologically advanced society. This work develops the first fully bendable and malleable toughened polylactic acid (PLA) green composite by incorporating a multifunctional polyhydroxybutyrate rubber copolymer filler that acts as an effective nucleating agent to accelerate PLA crystallization and performs as a dynamic plasticizer to generate massive polymer chain movement. The resultant biocomposite exhibits a 24‐fold and 15‐fold increment in both elongation and toughness, respectively, while retaining its elastic modulus at >3 GPa. Mechanism studies show the toughening effect is due to an amalgamation of massive shear yielding, crazing, and nanocavitation in the highly dense PLA matrix. Uniquely distinguished from the typical flexible polymer that stretches and recovers, this biocomposite is the first report of PLA that can be “bend, twist, turn, and fold” at room temperature and exhibit excellent mechanical robustness even after a 180° bend, attributes to the highly interconnected polymer network of innumerable nanocavitation complemented with an extensively unified fibrillar bridge. This unique trait certainly opens up a new horizon to future sustainable green electronics development.     

Superposition Coding with Unequal Error Protection for the Uplink of Overloaded DS-CDMA System

The overloaded CDMA schemes exploited in direct sequence CDMA (DS-CDMA) systems are mainly to accommodate a greater number of users than the available spreading factor N. In this paper, a superposition coding CDMA (SPC-CDMA) with unequal error protection (UEP) is proposed as one of the overloaded CDMA schemes for the next generation mobile communication systems. It exploits the available power control in most base stations to adapt the transmitted power of active users in the uplink channel. In this scheme, the active users are divided into G groups and each group consists of K users. The K users share the same spreading sequence and are distinguished by different received power levels. At the receiver side, the system first performs despreading for group detection followed by multiuser receiver to estimate the K user signals in each group. It is shown through simulations that better performance are achieved compared to the conventional DS-CDMA and existing overloaded collaborative spreading CDMA (CS-CDMA) schemes, in additive white Gaussian noise (AWGN) and fading channels. Hence, the proposed scheme maximizes the system capacity K-fold compared to conventional DS-CDMA system without requiring extra spreading codes, with average signal to noise ratio (SNR) cost of only 1dB and 2 dB over AWGN and fading channels respectively at BER of 10^?3. On the other hand, for the same N, K and power constraints, SPC-CDMA scheme achieves twofold increase in data rate with 0.7 and 4 dB gains over AWGN and fading channels respectively, compared with overloaded CS-CDMA scheme in the same system capacity. In addition, the proposed scheme can also attain different levels of UEP for different users?? requirements by adjusting their fractions of transmitted powers.     

Temperature dependence of avalanche multiplication in InP-based HBTs with InGaAs/InP composite collector: device characterization and physics model

Recent efforts are being focused on improving the breakdown of InP-based heterojunction bipolar transistors (HBTs) towards high-power applications. A fundamental understanding of the temperature dependence of breakdown and its physics mechanism in these devices is important. In this work, a detailed characterization of temperature-dependent collector breakdown behavior in InP DHBTs (DHBTs) with an InGaAs/InP composite collector is carried out. A physics model for the prediction of temperature-dependent breakdown in lnP/InGaAs composite collector is developed. We found that, although the variation of impact ionization coefficient due to the change of temperature may affect the device breakdown, the temperature-dependence of breakdown in the lnGaAs/InP composite collector could be significantly affected by the carrier transport in the InGaAs region. As temperature is increased, the increase in the contribution of InGaAs layer to the junction breakdown due to the reduction of electron energy relaxation length could be the root cause of the reduction of junction breakdown voltage. Good agreement between the physics model and experimental data demonstrate the validities of the proposed physics model to predict the temperature dependent breakdown characteristics for InP DHBTs.     

Performance of ATM traffic in optical CDMA

An ATM transit switch is proposed based on direct sequence optical code division multiple access technique. No buffering is necessary to facilitate the switching. Code conversion is used instead to emulate the switching function. The switch not only provides asynchronous access to the users but also has a limited capability of dynamic bandwidth allocation. It is free from timing jitters and switching delay is significantly reduced. A look‐up table is employed in the switching and updated through network management functions. The switch provides a new approach to asynchronous cross‐connection in the ATM core network. The performance of the new switch is evaluated by a set of prime codes and modified prime codes. Copyright © 2001 John Wiley & Sons, Ltd.