Alanine containing porous beads for mercury removal from artificial solutions

N‐methacryloyl‐(L )‐alanine (MALA) was synthesized by using methacryloyl chloride and alanine as a metal‐complexing ligand or comonomer. Spherical beads with an average diameter of 150–200 μm were obtained by suspension polymerization of MALA and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(HEMA–MALA) beads were characterized by SEM, swelling studies, surface area measurement, and elemental analysis. Poly(HEMA–MALA) beads have a specific surface area of 68.5 m²/g. Poly(HEMA–MALA) beads with a swelling ratio of 63%, and containing 247 μmol MALA/g were used in the removal of Hg²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 60 min. The adsorption of Hg²⁺ ions onto PHEMA beads was negligible (0.3 mg/g). The MALA incorporation into the polymer structure significantly increased the mercury adsorption capacity (168 mg/g). Adsorption capacity of MALA containing beads increased significantly with pH. The adsorption of Hg²⁺ ions increased with increasing pH and reached a plateau value at around pH 5.0. Competitive heavy metal adsorption from aqueous solutions containing Cd²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ was also investigated. The adsorption capacities are 44.5 mg/g for Hg²⁺, 6.4 mg/g for Cd²⁺, 2.9 mg/g for Pb²⁺, and 2.0 mg/g for Cu²⁺ ions. These results may be considered as an indication of higher specificity of the poly(HEMA–MALA) beads for the Hg²⁺ comparing to other ions. Consecutive adsorption and elution operations showed the feasibility of repeated use for poly(HEMA–MALA) chelating beads. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1222–1228, 2006     

Use of o-phenylene dioxydiacetic acid impregnated in Amberlite XAD resin for separation and preconcentration of uranium(VI) and thorium(IV)

The impregnation of o-phenylene dioxydiacetic acid (OPDA) into a polymeric matrix, Amberlite XAD-2000, is reported and was characterized by infrared spectroscopy. The amount of attached OPDA to the polymer resin was found to be 1.77mmolg(-1) resin. The resin was used for the sorption of U(VI) and Th(IV) from aqueous solution. This sorbent was capable of preconcentrating U(VI) and Th(IV) from weakly acidic or neutral solution. The retained metals were eluted sequentially using 0.25molL(-1) HCl for U(VI) and 1molL(-1) HCl for Th(IV) and determined spectrophotometrically using arsenazo-(III). The capacity of the resin for U(VI) and Th(IV) was found to be 0.121 and 0.113mmolg(-1), respectively. The impregnated resin exhibits a high chemical stability, reusability and fast equilibration. The method was used for the determination of U(VI) and Th(IV) in synthetic samples and rock samples.     

New metal chelate sorbent for albumin adsorption: Cibacron Blue F3GA-Zn(II) attached microporous poly(HEMA) membranes

Poly(2-hydroxyethyl methacrylate) [poly(HEMA)] membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (α-α′-azobis-isobutyronitrile, AIBN). The triazine dye Cibacron Blue F3GA was attached as an affinity ligand to poly(HEMA) membranes, covalently. These affinity membranes with a swelling ratio of 58% and containing 10.7 mmol Cibacron Blue F3GA/m² were used in the albumin adsorption studies. After dye-attachment, Zn(II) ions were chelated within the membranes via attached-dye molecules. Different amounts of Zn(II) ions [650–1440 mg Zn(II)/m²] were loaded on the membranes by changing the initial concentration of Zn(II) ions and pH. Bovine serum albumin (BSA) adsorption on these membranes from aqueous solutions containing different amounts of BSA at different pH was investigated in batch reactors. The nonspecific adsorption of BSA on the poly(HEMA) membranes was negligible. Cibacron Blue F3GA attachment significantly increased the BSA adsorption up to 92.1 mg BSA/m². Adsorption capacity was further increased when Zn(II) ions were attached (up to 144.8 mg BSA m²). More than 90% of the adsorbed BSA was desorbed in 1 h in the desorption medium containing 0.5M NaSCN at pH 8.0 and 0.025M EDTA at pH 4.9. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 657–664, 1998     

CO2 emissions of Turkish manufacturing industry: A decomposition analysis

In this study, CO₂ emissions of Turkish manufacturing industry are calculated by using the fuel consumption data at ISIC revision 2, four digit level. Study covers 57 industries, for the 1995–2001 period. Log Mean Divisia Index (LMDI) method is used to decompose the changes in the CO₂ emissions of manufacturing industry into five components; changes in activity, activity structure, sectoral energy intensity, sectoral energy mix and emission factors. Mainly, it is found that changes in total industrial activity and energy intensity are the primary factors determining the changes in CO₂ emissions during the study period. It is also indicated that among the fuels used, coal is the main determining factor and among the sectors, 3710 (iron and steel basic industries) is the dirtiest sector dominating the industrial CO₂ emissions in the Turkish manufacturing industry.     

Diversity and Stability of Yeast Species During the Fermentation of Tarhana

Tarhana is a traditional cereal-based fermented food produced with a mixture of yoghurt and flour. The main microbiota in the fermentation of tarhana is yeast, together with lactic acid bacteria. In this study, the yeast microbiota of home-made tarhana (HMT) and plant-type tarhana (PTT) dough samples was evaluated and compared during fermentation. Culture-dependent LSU and ITS-5.8S rDNA sequence analysis of yeast isolates collected during the tarhana dough fermentation clarified 45 selected isolates representing different clusters. These yeast isolates displayed high homologywith species Pichia kudriavzevii (11), Candida glabrata (11), Candida humilis (10), Saccharomyces cerevisiae (7), Kluyveromyces marxianus (4), Kazachstania servazzi (1), and Kazachstania unispora (1). Additionally, both culture-dependent and PCR-Denaturated Gradient Gel Electrophoresis (PCR-DGGE) analyses showed that S. cerevisiae, P. kudriavzevii and K. marxianus were abundant in the fermentation of HMT dough samples whereas P. kudriavzevii, C. humilis, and C. glabrata dominated the PTT dough samples. It was concluded that tarhana fermentation was accomplished with the presence of a wide variety of yeast species that mainly included P. kudriavzevii in both HMT and PTT dough samples.     

Removal of boron from aqueous solution by adsorption on Al2O3 based materials using full factorial design

This paper aims the adsorption of boron from aqueous solution onto Siral 30 and Pural using 2³ full factorial design. The effect of individual variables and their interactional effects for boron adsorption were also determined. From the statistical analysis, it is inferred that as pH and temperature increased boron adsorption from aqueous solution decreased. Siral 30 was found to be more efficient adsorbent than Pural. The unimportant factor affecting boron adsorption from aqueous solution was also verified by using Fisher adequacy test. At the 90% confidence level, the type of adsorbent, temperature and type of adsorbent–temperature interaction was effective on boron adsorption from aqueous solution. The experimental results were fitted to the Langmuir, Freundlich and Dubinin–Radushkevich (DR) equations to find out adsorption capacities. In most cases, the results indicate that Freundlich and DR equations are well described with the sorption data. The adsorption capacity values of Siral 30 calculated from Freundlich and DR equation was greater than that of Pural. The thermodynamic parameters were also estimated and the adsorption process was not spontaneous nature.     

Facial expression recognition for monitoring neurological disorders based on convolutional neural network

Multimedia Tools and Applications - Facial expressions are a significant part of non-verbal communication. Recognizing facial expressions of people with neurological disorders is essential because...     

Polycaprolactone‐hydroxy apatite composites for tissue engineering applications

In this study, scaffolds with polycaprolactone (PCL) and hydroxy apatite (HA) were produced. Their properties are not sufficient to be used alone. Oleic Acid (OA) and glycerol monooleate (GMO) as organic additives were selected for a homogeneous distribution of the ceramic material in the polymer matrix. Biocomposite materials were prepared with solvent casting‐salt leaching technique using dichloromethane as the solvent. Salt was used as the porosifier. Materials were kept in simulated body fluid (SBF) to determine the bioactivity in vitro conditions. FTIR and EDX analyses for chemical characterization, tensile and compressive tests for mechanical properties, SEM analyses for surface properties and BET analyses for pore sizes, total surface areas and total pore volumes of scaffolds were performed. FTIR, EDX, and SEM analyses were repeated after SBF treatment. Pore diameters were highly increased with 3 and 20 wt% HA addition. Small amount of GMO addition is more effective on pore size. Mechanical properties of scaffolds were suitable for soft tissue applications, as smooth muscle cells, skin and cancellous bone. The cytotoxicity and cell proliferation on scaffolds were studied with smooth muscle cells (SMC) and L929 fibroblastic cells in vitro. No cytotoxic effect was observed for the scaffolds in both cell types. J. VINYL ADDIT. TECHNOL., 24:248–261, 2018. © 2016 Society of Plastics Engineers