Chasing real-time interaction in new media: towards a new theoretical approach and definition

‘Real-Time’ is one of the most frequent concepts used referring to digital media. Despite it is commonly related to immediate feedback, it is not clear when it happens and what its characteristics are, especially in current digital interfaces. Although real-time has been written about very extensively in the context of Human Computer Interaction and Computational Systems, there are few studies evaluating the key features of real-time interaction in other domains. This article attempts to address this situation by proposing a new approach to the concept of real-time interaction driving the analysis of this topic into paradigmatic cases studies in new media, video games and digital artworks. This new analysis reveals several specific facets that allow us to identify new factors in the understanding of this fuzzy concept. Finally, the article proposes a new definition of ‘real-time interaction’ based on the findings in the context of new media practices.     

Ten‐year results of galvanic sacrificial anodes in steel reinforced concrete

Zinc sacrificial anodes have been included in patch repairs to steel reinforced concrete structural elements suffering from corrosion since the mid‐1990s. A number of these anode‐containing repairs have been monitored with time. One of the first monitored sites was of a locally repaired cross beam of a bridge structure in Leicester, UK, which has now completed 10 years since its original repair and anode installation. This paper reviews the performance of the anodes installed at the Leicester site in terms of anode current output and steel reinforcement polarisation and corrosion rate over the period. It also presents results of analysis of recovered anodes exposed for 10 years which still show electrolyte continuity, uniform consumption of the zinc and coherent encasing mortar. The knowledge gained from the 10 year results has enabled the development of new, higher current output anodes, which are now trialled in this and other sites.     

Dynamic modelling of a two-phase thermofluidic oscillator for efficient low grade heat utilization: Effect of fluid inertia

In this paper, a promising heat engine technology capable of utilizing low grade heat is examined. Based on a two-phase thermofluidic oscillator concept, the novelty and advantage of this particular system lie in its use of phase change and its lack of reliance on inertia to sustain oscillations, though it is recognized that inertia will always be present in any physical manifestation of the engine. The system is analysed using lumped linearized one-dimensional network models, both with and without inertia, based on thermoacoustic principles and extending these to account for phase change. The gain (temperature difference between source and sink heat exchangers) and frequency at which marginal stability (desirable continuous oscillations) can be achieved is calculated. The effects of the load resistance (fluid drag) and fluid inertia, as well as of the flow resistance due the feedback valve on the marginal stability gain, frequency and exergetic efficiency of the system are investigated. It is found that an increase in feedback resistance leads to a need for a higher gain for oscillatory behaviour to be achieved. In addition, even though an increase in either the resistance or inertia in the load, or the feedback resistance at low values of these variables has almost no effect on the required gain and the oscillation frequency of the system, an increase in these variables can lead at higher values to increased gains and reduced frequencies. A reduced feedback resistance and greater load inertia can also lead to considerably higher efficiencies, while increasing the load resistance allows for an increase in efficiency until a maximum is reached, after which the efficiency decreases again. The validity of certain approximations made previously is considered, and it is shown that these must be made with care. The results from this study can be used for the improved design and optimization of such oscillators, and similar systems.     

Oil and fungal biomass dispersion in a stirred tank containing a simulated fermentation broth

The production of γ‐decalactone by the filamentous fungus Trichoderma harzianum involves four phases (oil–water–air–mycelium) and its dispersion is crucial during fermentation. Oil and biomass (when present) dispersion, as a function of the volumetric power drawn (P/V), was characterized, in two; three‐ and four‐phase systems agitated with Rushton turbines. Trichoderma harzianum mycelium was used as the solid phase in the four‐phase system. Two stages of the fermentation were simulated: the beginning (15% oil and 1.4 kgm^?3 of mycelium) and the end (2% oil and 10.6 kg m^?3 of mycelium). In the two‐phase system, the use of exhausted broth achieved higher oil dispersions at low P/V values as compared with distilled water. Aeration decreased the oil dispersion for the high‐oil system, but enhanced oil dispersion for the low‐oil system. Compared with the P/V used in the actual fermentation (0.2 kW m^?3), a high segregation of the system was observed for the high‐oil/low‐biomass system, due to the difficulty of mixing the thick oil–air emulsion present at the top of the tank. The system simulating the end of the fermentation reached almost complete homogeneity of oil and biomass, a phenomenon due to the high biomass/oil ratio and the biomass acting as an oil carrier. © 2001 Society of Chemical Industry     

Characteristics of dielectric loaded and covered circular waveguide phased arrays

The use of dielectric materials for the hardening and matching of phased-array antennas in recent years has shown that a more complete understanding of the effects of these materials upon the array performance is necessary. The characteristics of fully loaded, plugged, and sheath covered circular waveguide phase arrays are analyzed and discussed. Numerical solutions of the boundary-value problem are verified by experimental and convergence tests. Particular emphasis is placed on the study of (forced) surface wave resonance effects. Three different cases for surface wave resonances were obtained. These include the case in which surface wave resonances are present in the absence of dielectrics, the case in which they are trapped by the presence of dielectric plugs, as well as the case in which waves are trapped by the presence of a dielectric sheath. The surface wave resonance due to the plug is shown to vanish for certain "bandpass" ranges of plug thickness which repeat periodically for a single trapped waveguide mode. On the other hand, the surface wave trapped in the sheath exhibits no "bandpass" characteristics. Instead, multiple surface wave resonances occur with increasing sheath thickness. Finally, the surface wave resonances observed here appear at isolated points in the scan plane.     

Synthesis and characterisation of chromium lutetium gallium garnet solid solution

The chromium lutetium gallium garnet system has been studied. Samples with 2xCaOxCr₂O₃(3 − 2x)Lu₂O₃5Ga₂O₃ (x = 0.025, 0.05, 0.075, 0.1, 0.2 and 0.3,) and xCr₂O₃(3 − x)Lu₂O₃5Ga₂O₃ (x = 0, 0.05, 0.075 and 0.3) compositions have been prepared in Ca,Cr:LGG and Cr:LGG systems, respectively. Samples were prepared by ceramic method, fired at 1250 °C/6 h and characterised by XRD, lattice parameters, UV-vis-NIR spectroscopy, CIE L^*a^*b^* measurements and SEM/EDX. Results indicate that Ca,Cr:LGG and Cr:LGG solid solutions are obtained. In Cr:LGG system only Cr(III) is stabilised in octahedral positions substituting for Lu(III) and Ga(III). Both Cr(III) and Cr(IV) are present in Ca,Cr:LGG. The calcium is a charge compensator to stabilise Cr(IV) and this is the predominant oxidation state up to x = 0.075 composition. From this composition, Cr(III) becomes more stabilised in garnet lattice. Cr(IV) occupies generally tetrahedral and dodecahedral sites substituting for Ga(III) and Lu(III), while Cr(III) is in octahedral site substituting for Ga(III).     

Multihierarchical interactive task planning: application to mobile robotics.

To date, no solution has been proposed to human-machine interactive task planning that deals simultaneously with two important issues: 1) the capability of processing large amounts of information in planning (as it is needed in any real application) and 2) being efficient in human-machine communication (a proper set of symbols for human-machine interaction may not be suitable for efficient automatic planning and vice versa). In this paper, we formalize a symbolic model of the environment to solve these issues in a natural form through a human-inspired mechanism that structures knowledge in multiple hierarchies. Planning with a hierarchical model may be efficient even in cases where the lack of hierarchical information would make it intractable. However, in addition, our multihierarchical model is able to use the symbols that are most familiar to each human user for interaction, thus achieving efficiency in human-machine communication without compromising the task-planning performance. We formalize here a general interactive task-planning process which is then particularized to be applied to a mobile robotic application. The suitability of our approach has been demonstrated with examples and experiments.     

A method of ranking the aggressive nature of chloride contaminated concrete

In this work, previously reported titration data obtained on cement pastes and concretes are analysed. It is postulated that the inhibitive nature of concretes may be quantified by titrating a ground suspension to the endpoint indicated by phenolphthalein while the aggressive chloride content may be determined from the soluble chloride at the endpoint of this titration. Thus, the aggressive nature of chloride contaminated concrete may be ranked using the ratio of the extracted chloride to acid neutralisation capacity. Not only is there a theoretical justification for this, but it is relatively simple to determine.