Effective Periodic Poling in Optical Fibers

The distributions of electric field and induced second‐order nonlinearity are analyzed in the periodic poling of optical fibers. A quasi‐phase matching efficiency for the induced nonlinearity is calculated in terms of both the electrode separation distance between the applied voltage and generalized electrode width for the periodic poling. Our analysis of the quasi‐phase matching efficiency implies that the conversion efficiency can be enhanced through adjusting the separation distance, and the electrode width can be maximized if the electrode width is optimized.     

An equalization technique for orthogonal frequency-divisionmultiplexing systems in time-variant multipath channels

A loss of subchannel orthogonality due to time-variant multipath channels in orthogonal frequency division multiplexing (OFDM) systems leads to interchannel interference (ICI) which increases the error floor in proportion to the Doppler frequency. A simple frequency-domain equalization technique which can compensate for the effect of ICI in a multipath fading channel is proposed. In this technique, the equalization of the received OFDM signal is achieved by using the assumption that the channel impulse response (CIR) varies in a linear fashion during a block period and by compensating for the ICI terms that significantly affect the bit-error rate (BER) performance     

Poly(diketopyrrolopyrrole‐benzothiadiazole) with Ambipolarity Approaching 100% Equivalency

As a characteristic feature of conventional conjugated polymers, it has been generally agreed that conjugated polymers exhibit either high hole transport property (p‐type) or high electron transport property (n‐type). Although ambipolar properties have been demonstrated from specially designed conjugated polymers, only a few examples have exhibited ambipolar transport properties under limited conditions. Furthermore, there is, as yet, no example with ‘equivalent’ hole and electron transport properties. We describe the realization of an equivalent ambipolar organic field‐effect transistor (FET) by using a single‐component visible–near infrared absorbing diketopyrrolopyrrole (DPP)‐benzothiadiazole (BTZ) copolymer, namely poly[3,6‐dithiene‐2‐yl‐2,5‐di(2‐decyltetradecyl)‐pyrrolo[3,4‐c]pyrrole‐1,4‐dione‐5’,5’’‐diyl‐alt‐benzo‐2,1, 3‐thiadiazol‐4,7‐diyl] ( PDTDPP‐alt‐BTZ ). PDTDPP‐alt‐BTZ shows not only ideally balanced charge carrier mobilities for both electrons (?_e = 0.09 cm²V^?1s^?1) and holes (?_h = 0.1 cm²V^?1s^?1) but also its inverter constructed with the combination of two identical ambipolar FETs exhibits a gain of ～35 that is much higher than usually obtained values for unipolar logic.     

Tuning Interfacial Properties by Spontaneously Generated Organic Interlayers in Top‐Contact‐Structured Organic Transistors

Controlling the interfacial properties between the electrode and active layer in organic field‐effect transistors (OFETs) can significantly affect their contact properties, resulting in improvements in device performance. However, it is difficult to apply to top‐contact‐structured OFETs (one of the most useful device structures) because of serious damage to the organic active layer by exposing solvent. Here, a spontaneously controlled approach is explored for optimizing the interface between the top‐contacted source/drain electrode and the polymer active layer to improve the contact resistance (R_C). To achieve this goal, a small amount of interface‐functionalizing species is blended with the p‐type polymer semiconductor and functionalized at the interface region at once through a thermal process. The R_C values dramatically decrease after introduction of the interfacial functionalization to 15.9 kΩ cm, compared to the 113.4 kΩ cm for the pristine case. In addition, the average field‐effect mobilities of the OFET devices increase more than three times, to a maximum value of 0.25 cm² V^?1 s^?1 compared to the pristine case (0.041 cm² V^?1 s^?1), and the threshold voltages also converge to zero. This study overcomes all the shortcomings observed in the existing results related to controlling the interface of top‐contact OFETs by solving the discomfort of the interface optimization process.     

High-Temperature Stability of Thermoelectric Skutterudite In0.25Co3FeSb12

The thermal stability of skutterudite-based thermoelectric modules is of great importance since they are used at elevated temperatures. This study examined the high-temperature stability of In-filled and Fe-doped skutterudites (In_0.25Co₃FeSb₁₂) as a function of the following aging variables: atmosphere (vacuum and air), temperature, and time. Sb-based oxides are produced preferentially on exposure to high temperatures in air. The oxide layer produced during aging at 823?K in air was much thinner than that produced during aging at 723?K in air. The formation of InSb is believed to retard the oxidation of Sb and act as an obstacle to the growth of the oxide layer. The CoSb₃-based skutterudites were stable at 823?K if they were not exposed to air, and InSb phases were not produced in the In_0.25Co₃FeSb₁₂ skutterudites.     

Ultra-wideband (from DC to 110 GHz) CPW to CPS transition

A new ultra-wideband, low-loss and small-size coplanar waveguide (CPW) to coplanar strip (CPS) transition which can be used from DC to 110 GHz is presented. The proposed transition connects CPW with CPS by the reformed air-bridge. Two ground planes of CPW are tied at their ends by a line and the centre of the line is connected to the ground strip of CPS by another line. Owing to the symmetry of the proposed structure, the currents of two ground planes of CPW are combined with the same phase and transferred to the ground strip of CPS. With height of 3 μm, the signal line of CPW passes over two connecting lines and is connected to the signal strip of CPS. For the back-to-back transition structure, insertion loss <1 dB and return loss >15 dB are obtained from 0.5 to 110 GHz     

Noun Sense Identification of Korean Nominal Compounds Based on Sentential Form Recovery

In a machine translation system, word sense disambiguation has an essential role in the proper translation of words when the target word can be translated differently depending on the context. Previous research on sense identification has mostly focused on adjacent words as context information. Therefore, in the case of nominal compounds, sense tagging of unit nouns mainly depended on other nouns surrounding the target word. In this paper, we present a practical method for the sense tagging of Korean unit nouns in a nominal compound. To overcome the weakness of traditional methods regarding the data sparseness problem, the proposed method adopts complement‐predicate relation knowledge that was constructed for machine translation systems. Our method is based on a sentential form recovery technique, which recognizes grammatical relationships between unit nouns. This technique makes use of the characteristics of Korean predicative nouns. To show that our method is effective on text in general domains, the experiments were performed on a test set randomly extracted from article titles in various newspaper sections.