中国(大陆)粉末冶金零件行业2004年进展

本文介绍了中国（大陆）粉末冶金零件行业2004年的生产概况与市场动向。阐述了粉末冶金汽车零件的市场动态。分析了中国（大陆）粉末冶金零件行业面临的挑战。介绍了美国APMI International的PMT认证。     

生物脱氮技术处理废水的应用实践

对废水生物脱氮工艺的开工调试进行了分析,通过对污泥的培养、驯化、使活性污泥达到最佳的污水处理状态。对在调试过程中出现的问题提出相应的改进措施,进一步降低了外排水生化指标。     

级数sum from n=1 to ∞(α(α-1)…(α-n+1)x~n/n!)在x=±1处的敛散性研究

用比较原则及莱布尼兹判别法对函数f(x)=(1+x)α的马克劳林级数在x=±1的敛散情形给予讨论.     

Dynamic deformation behavior of ultrafine-grained low-carbon steels fabricated by equal-channel angular pressing

The dynamic deformation behavior of ultrafine-grained low-carbon steels fabricated by equal-channel angular pressing (ECAP) was investigated in this study. Dynamic torsional tests, using a torsional Kolsky bar, were conducted on four steel specimens, two of which were annealed at 480 °C after ECAP, and then the test data were compared in terms of microstructures, tensile properties, and adiabatic shear-band formation. The equal-channel angular pressed specimen consisted of very fine, equiaxed grains of 0.2 to 0.3 μm in size, which were slightly coarsened after annealing. The dynamic torsional test results indicated that maximum shear stress decreased with increasing annealing time, whereas fracture shear strain increased. Some adiabatic shear bands were observed at the gage center of the dynamically deformed torsional specimen. Their width was smaller in the equal-channel angular pressed specimen than in the 1-hour-annealed specimen, but they were not found in the 24-hour-annealed specimen. Ultrafine, equiaxed grains of 0.05 to 0.2 μm in size were formed inside the adiabatic shear band, and their boundaries had characteristics of high-angle grain boundaries. These phenomena were explained by dynamic recrystallization due to a highly localized plastic strain and temperature rise during dynamic deformation.     

Effect of Hot Band Annealing on Magnetic Properties in 3% Si Grain‐oriented Electrical Steels

Hot band annealing is known to be a prerequisite for good magnetic properties irrespective of manufacturing methods in grain‐oriented Fe‐3 wt.% Si electrical steels. In this study, the effects of hot band annealing on magnetic properties were investigated in 3% grain‐oriented electrical steels of low soluble AI contents and one‐stage cold rolling. Microstructure and precipitate distribution were compared with hot band annealing conditions. Secondary recrystallization behaviour with hot band annealing condition was also discussed.     

创新教学管理 提高教学质量

创新教学管理,提高教学质量,需要树立全新的教学管理理念,创新教学管理的运行机制,建立一支能够适应现代大学发展要求的高素质教学管理队伍。     

我国城乡居民照明用电状况调查分析

本文介绍了一次全国性的居民家庭照明用电抽样调查研究案例，全面而系统地分析了我国城乡居民家庭照明用电情况和各类照明光源在居民家庭中的使用状况。     

Comments on “Quadratic stabilization of continuous timesystems with state-delay and norm-bounded time-varyinguncertainties”

In the above mentioned paper by Mahmoud-Muthairi (ibid. vol.39 (1994)) a sufficient condition for memoryless stabilization of a class of uncertain linear systems with a variable-state delay and norm-bounded time-varying uncertainties is derived in terms of an algebraic Riccati equation. This Riccati equation depends on several free matrix variables, and a subsequent result in the paper, Theorem 2, states that failure or success of the stabilization algorithm is independent of the selection of these matrix variables. In this paper, we give a counterexample to this Theorem 2 as well as providing a fix     

彩色平板玻璃的色度计算

通过数值分析，运用解析几何原理推导出计算彩色玻璃三个参数（主波长、纯度和亮度）的数学模型，编制出计算程序。利用彩色玻璃的单色光透过率，通过该程序可以快速、准确地计算该玻璃的色度值，鉴定该颜色的质量。