Formation of C4 species in the deactivation of a Pd/SiO2 catalyst during the selective hydrogenation of acetylene

The deactivation characteristics of Pd/SiO₂ in the selective hydrogenation of acetylene were correlated with changes in the amount of the C4 species produced. The amounts of butenes produced changed in parallel with the catalyst activity, indicating that the rate limiting step for butene production was the same as that for acetylene hydrogenation. On the other hand, the amount of 1,3-butadiene produced changed, showing a maximum with catalyst deactivation because 1,3-butadiene is an intermediate in the sequential reaction process which involves both the production and consumption of 1,3-butadiene. This was verified by a simultaneous TG/reaction experiment showing that 1,3-butadiene was a precursor of green oil. The catalyst showed a self-regenerative behavior in its activity and the amounts of C4 species produced during the early stage of deactivation because two opposite factors, which contributed to either the lowering or the promotion of activity, were involved in the process. A specific type of polymer species, produced during the initial period of deactivation, is proposed to be responsible for the promotion of catalyst activity.     

A 16-Mbit/s adapter chip for the IBM token-ring local area network

The authors describe a 9.02×9.02-mm chip built in 1-μm CMOS with two levels of metal and an additional mask level for fabricating capacitors. It contains both analog and digital circuits and has provisions for self-test. The function includes the transmitter, receiver, protocol handler, an microprocessor, as well as interfaces for RAM/ROM storage, IBM PC bus, IBM PS/2 bus, IBM 3174 bus, and Motorola 68000 bus. The physical design terrains are formed by 24K circuits of standard cell gates, a 10K-circuit equivalent hand-honed custom microprocessor, and an analog macro. The chip operates from a single 5-V supply, and the power consumption is 0.8 W nominal at 16 Mb/s. The chip can also be operated at 4 Mb/s     

BioFET sensor for detection of albumin in urine

Characterisation of a BioFET for detection of albumin in a mixture of human urine is presented. To avoid electrolyte effect of the urine, it was measured in PBS (phosphate buffer saline) at a fixed pH after albumin binding. The drain current was modulated by the albumin bound to the anti-albumin immobilised on the gate surface of the BioFET. The current variation ratio was likely to be proportional to the concentration of the albumin in the range 50-250 mg/1. The results show the feasibility of the BioFET as a urinary albumin sensor.     

Technical note: Usability evaluation of the modified CIE1976 Uniform‐Chromaticity scale for assessing image quality of visual display monitors

White uniformity indicates the degree of uniform distribution of white color across the display screen and is one of the important inspection factors determining the image quality of a visual display unit (VDU). Experiments in which participants were confronted with 6 evaluation points embedded in 3 measurement groups on a VDU screen were conducted to gather the psychophysical data that include the levels of white uniformity obtained from participants and a colorimetric system (CA‐100). In an accuracy test, 37.12% of the participants showed the same conclusion led by the original CIE1976 criteria, and 62.88% of the participants showed the same conclusion led by the modified equation. In magnitude estimation evaluating the display's white uniformity, the magnitude score of the modified equation (0.36) was significantly larger than that of the original equation (0.32). It was concluded that the modified equation is more sensitive to the change of white uniformity. © 2003 Wiley Periodicals, Inc. Hum Factors Man 13: 85–95, 2003.     

An accurate and practical buffer allocation model for the buffer cache based on marginal gains

A new dynamic buffer allocation strategy based on the notion of marginal gains is presented for the buffer cache that is used by the operating system to store frequently accessed disk blocks in main memory, and the performance of the proposed strategy is compared with those of previous allocation strategies. In the proposed strategy, marginal gain values are predicted by exploiting functions that approximate the expected number of buffer hits per unit time. Experimental results from both trace-driven simulation and an actual implementation in the FreeBSD operating system show that the proposed strategy accurately predicts the marginal gain values for various workloads resulting in significantly improved buffer hit ratios.     

Foveation-Based Error Resilience and Unequal Error Protection over Mobile Networks

By exploiting new human-machine interface techniques, such as visual eyetrackers, it should be possible to develop more efficient visual multimedia services associated with low bandwidth, dynamic channel adaptation and robust visual data transmission. In this paper, we introduce foveation-based error resilience and unequal error protection techniques over highly error-prone mobile networks. Each frame is spatially divided into foveated and background layers according to perceptual importance. Perceptual importance is determined either through an eye tracker or by manually selecting a region of interest. We attempt to improve reconstructed visual quality by maintaining the high visual source throughput of the foveated layer using foveation-based error resilience and error correction using a combination of turbo codes and ARQ (automatic reQuest). In order to alleviate the degradation of visual quality, a foveation based bitstream partitioning is developed. In an effort to increase the source throughput of the foveated layer, we develop unequal delay-constrained ARQ (automatic reQuest) and rate compatible punctured turbo codes where the punctual pattern of RCPC (rate compatible punctured convolutional) codes in H.223 Annex C is used. In the simulation, the visual quality is significantly increased in the area of interest using foveation-based error resilience and unequal error protection; (as much as 3 dB FPSNR (foveal peak signal to noise ratio) improvement) at 40% packet error rate. Over real-fading statistics measured in the downtown area of Austin, Texas, the visual quality is increased up to 1.5 dB in PSNR and 1.8 dB in FPSNR at a channel SNR of 5 dB.     

An efficient implementation of SELF, a dynamically-typed object-oriented language based on prototypes

We have developed and implemented techniques that double the performance of dynamically-typed object-oriented languages. Our SELF implementation runs twice as fast as the fastest Smalltalk implementation, despite SELF's lack of classes and explicit variables.To compensate for the absence of classes, our system uses implementation-levelmaps to transparently group objects cloned from the same prototype, providing data type information and eliminating the apparent space overhead for prototype-based systems. To compensate for dynamic typing, user-defined control structures, and the lack of explicit variables, our system dynamically compilesmultiple versions of a source method, eachcustomized according to its receiver's map. Within each version the type of the receiver is fixed, and thus the compiler can statically bind andinline all messages sent toself.Message splitting andtype prediction extract and preserve even more static type information, allowing the compiler to inline many other messages. Inlining dramatically improves performance and eliminates the need to hard-wire low-level methods such as+, ==, andifTrue:.Despite inlining and other optimizations, our system still supports interactive programming environments. The system traverses internal dependency lists to invalidate all compiled methods affected by a programming change. The debugger reconstructs inlined stack frames from compiler-generated debugging information, making inlining invisible to the SELF programmer.This work has been generously supported by National Science Foundation Presidential Young Investigator Grant #CCR-8657631, and by IBM, Texas Instruments, NCR, Tandem Computers, Apple Computer, and Sun Microsystems.This paper was originally published inOOPSLA '89 Conference Proceedings (SIGPLAN Notices, 25, 10 (1989) 49–70).     

Bandwidth and region division for broadband multi-cell networks

A cell planning technique termed BRD (bandwidth and region division) is presented for overcoming interference, maintaining QoS (quality of service) and improving channel capacity over OFDM (orthogonal frequency division multiplexing)-based broadband cellular networks. Through an optimal combination of sectorization and zero padding, bandwidth and region division is achieved that minimizes the outage probability for forward-link cell planning. In order to verify the effectiveness of the proposed algorithm, a Monte Carlo simulation is performed over multi-cell environments.     

A practical approach for statistical matching of output queueing

We study a practical approach to match the performance of an output-queued switch statistically. For this purpose, we propose a novel switching architecture called a multiple input/output-queued (MIOQ) switch that requires no speedup for providing sufficient switching bandwidth. To operate an MIOQ switch in a practical manner, we also propose a multitoken-based arbiter which schedules the switch at a high operation rate and a virtual first-in first-out queueing scheme which guarantees the departure order of cells belonging to the same traffic flow at output. Additionally, we show that the proposed switch can naturally provide asymmetric bandwidth for inputs and outputs, which may be important in dealing with the links with different bandwidth demands. Finally, we compare the performance of an MIOQ switch with that of an output-queued switch and discuss the design criteria to match the performance of an output-queued switch.