In vitro gas production profiles and fermentation end‐products in processed peas,lupins and faba beans

BACKGROUND: An experiment was carried out to establish whether using a pre‐compacting device (expander) changes the contribution of dry matter (DM) and degradative behaviour of peas, lupins and faba beans over the different fractions (non‐washable fraction, NWF; insoluble washable fraction, ISWF; soluble washable fraction, SWF). Samples of the entire concentrate ingredients (WHO ingredients) and their different fractions (NWF, ISWF and SWF) were subjected to three processes (Retsch milling, R; expander treatment, E; expander‐pelleting, EP) and their fermentation characteristics were evaluated using an in vitro gas production technique. RESULTS: In peas and faba beans, both the E and EP processes increased the size of the NWF (P < 0.05) and decreased the size of the SWF compared with the R process. The maximum fractional rate of gas production in the first phase of fermentation was higher in the E and EP samples than in the R samples (P < 0.05). In lupins and faba beans the E and EP processes shifted the pattern of fermentation towards a more glucogenic fermentation, as represented by a lower non‐glucogenic to glucogenic ratio (NGR). Ammonia production (NH₃‐N) in the E and EP samples was significantly (P < 0.05) lower than that in the R samples. CONCLUSION: It is concluded that the E and EP processes provide a certain level of protection against ruminal breakdown to dietary protein and shift the pattern of fermentation towards a more glucogenic fermentation. Copyright © 2008 Society of Chemical Industry     

Association Equation of State for Hydrogen-Bonded Substances

An association equation of state (AEOS) has been proposed for hydrogen-bonded compounds. To obtain this AEOS, the compressibility factor was assumed to consist of two parts: the physical part due to physical interactions of molecules; and the chemical part due to molecular association by hydrogen bonding of molecules. The physical part of the compressibility factor was represented by the MMM EOS for non-polar compounds proposed by Mohsen-Nia et al., Fluid Phase Equilib. 206 , 27-39 (2003), and the chemical part of the compressibility factor was deduced by proposing a molecular association model of infinite series.     

Effect of FGM core on dynamic response of a buried sandwich cylindrical shell in poroelastic soil to harmonic body waves

The two-dimensional dynamic interaction of progressive plane seismic waves with an arbitrarily thick, isotropic, and functionally graded cylindrical shell of infinite extent embedded in a boundless fluid-saturated porous elastic medium is investigated. The inhomogeneous shell is approximated by a laminate model, for which the solution is expected to gradually approach the exact one as the number of layers increases. Continuity of the displacement and stress components at the interfaces of neighboring layers is applied to form a system global transfer matrix, ultimately leading to determination of the modal scattering and transmission coefficients. The analytical results are illustrated with numerical examples in which an air-filled steel–zirconia FGM shell, buried in a water-saturated Ridgefield Sandstone formation, is insonified by fast compressional or shear waves at normal incidence. The effects of material compositional gradient and FGM layer thickness on the basic dynamic field quantities are evaluated and discussed. Limiting cases are considered and good agreements with the solutions available in the literature are obtained.     

纳米结构Ni-Al_2O_3梯度涂层的制备及结构表征（英文）

将微米级的Ni和Al_2O_3粉末通过行星式球磨机沉积在固定于球磨罐内顶端的铝板上,制备纳米结构的Ni-Al_2O_3复合涂层。共采用五组不同Ni与Al_2O_3质量比(1:1~16:1)的混合粉末,并制备一组纯Ni涂层。用XRD、SEM和TEM技术对涂层的相组成和微观结构进行表征。结果表明,初始混合粉末的成分对涂层中Al_2O_3颗粒的含量和微观结构有很大影响。Al_2O_3含量高的初始混合粉沉积的涂层中,Al_2O_3颗粒所占体积分数大。虽然通过本研究的方法可沉积出含有50%Al_2O_3颗粒的Ni-Al_2O_3复合涂层,但其性能差,制备出的致密度高、无裂纹和/或孔洞的涂层中Al_2O_3颗粒的含量小于20%,且需用Ni和Al_2O_3质量比≥4:1的初始混合粉制备。研究还发现,机械和冶金结合是涂层和铝基体结合的主要机理。通过在同一制备条件下沉积两种独立的涂料层可以成功制备出具有较好的致密度和完整性的功能梯度复合涂层。     

Effect of Immersion Time on Corrosion Behavior of Single-Phase Alloy and Nanocomposite Bismuth Telluride-Based Thermoelectrics in NaCl Solution

The corrosiveness of bismuth telluride-based thermoelectric materials (n-type single-phase alloy and a nanocomposite with MoS₂ nanoinclusions), in 0.1 molar solution of sodium chloride (NaCl), was investigated. The electrochemical impedance spectroscopy curves obtained after 1, 24, 48 and 72 h immersion time revealed the enhancement of the corrosion resistance of the nanocomposite specimen in a 0.1 molar NaCl solution in comparison with the single-phase bismuth telluride-based alloys, and the passivity increased by immersion time up to 72 h. The nanocomposite sample with submicron grains provided suitable nucleation sites for passive film nucleation that led to higher protective behavior.     

Oxovanadium(IV) salicylidene Schiff base complex anchored on mesoporous silica MCM-41 as hybrid materials: a robust catalyst for the oxidation of sulfides

Oxovanadium(IV) Schiff base complex have been anchored onto the surface of purely siliceous MCM-41 and tested for its activity as catalyst for the oxidation of sulfides. This catalyst could alter this oxidation reaction extremity, exhibiting excellent yields with 100 % selectivity. The intercalation of the complex inside the silica matrix was supported by various characterization techniques like X-ray diffraction, differential thermogravimetric (TG-DTA), BET measurements, UV–Vis diffuse reflectance spectroscopy and Fourier transform infrared spectroscopy (FT-IR). The stability of the catalyst during the course of the reaction was confirmed from its post catalytic FT-IR and XRD analysis. The catalyst could be reused five times without notable loss of its catalytic activity and efficiency which indicates that the metal-Schiff base moiety is intact and the coordination environments are not altered during the reaction.     

The effect of nano-size additives on the electrical conductivity of matrix suspension and properties of self-flowing low-cement high alumina refractory castables

Influence of two nano-size additives on electrical properties of suspension matrix of self-flowing low-cement high alumina refractory castable is investigated. For this purpose, castament FS 10 and FS 20 on the basis of polycarboxylate ether were considered. The self-flow value, workability and mechanical strength of the castable are evaluated and their relations with electrical conductivity are determined. Using these relations, the type and optimum amount of proper additive for these refractory castables are determined. It was shown that if the electrical conductivity of matrix suspension is less than 0.71 mS/cm, high alumina low-cement self-flowing refractory castable can be obtained. The best self-flow, sufficient working time and adequate mechanical strength in the castables are obtained with 0.08 wt.% FS 20.     

Role of nano‐size SiO2 additive on the thermal behavior of cyanoacrylate nanocomposite

Nowadays, solvent‐free, one‐part cyanoacrylate adhesive is widely used in medicine and dentistry. According to a literature survey done by the authors, there are few papers concentrated on the role of nano‐sized particles on the thermal behavior of cyanoacrylate glue. Thus the main goal of the current research focused on clarifying the role of nano‐sized SiO₂ on the thermal behavior of cyanoacrylate. Thermal behavior of all materials including cyanoacrylate and its nanocomposites was studied by using Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) methods. The results of DSC analysis showed that an increase in the amount of nano‐sized SiO₂ results in decreases in the duration of cyanoacrylate curing, energy release during polymerization, and incubation time of polymerization. Furthermore, the results of TGA tests illustrated that the weight loss of cyanoacrylate strongly depends on the contents of both caffeine and SiO₂. In fact, an increase in nano‐sized SiO₂ content increases the degradation temperature of cyanoacrylate. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

TiN Nanoparticles for Enhanced THz Generation in TDS Systems

By virtue of the surface plasmon resonance effect, plasmonic nanoparticles (NPs) can localize the light field and significantly enhance the performance of some optoelectronic devices. In this work, NPs are employed for an enhanced generation of terahertz radiation from LT-GaAs-based antennas. Therefore, we have prepared plasmonic TiN NPs by direct ultrasonication (ULS) and pulsed laser ablation (PLA) techniques. The zeta potential, particle size, and absorbance were used to characterize the NPs in their colloidal forms in a comparison to commercial Au NPs. A layer of polydispersed titanium nitride (TiN) NPs prepared by PLA and deposited on the surface of an LT-GaAs device shows a significant improvement of terahertz signal generation from these devices with an enhancement of the peak to peak amplitude of 100%.     

Analysis of MTHFR and MTRR Gene Polymorphisms in Iranian Ventricular Septal Defect Subjects

Ventricular septal defect (VSD) is one of the most common types of congenital heart defects (CHD). There are vivid multifactorial causes for VSD in which both genetic and environmental risk factors are consequential in the development of CHD. Methionine synthase reductase (MTRR) and methylenetetrahydrofolate reductase (MTHFR) are two of the key regulatory enzymes involved in the metabolic pathway of homocysteine. Genes involved in homocysteine/folate metabolism may play an important role in CHDs. In this study; we determined the association of A66G and C524T polymorphisms of the MTRR gene and C677T polymorphism of the MTHFR gene in Iranian VSD subjects. A total of 123 children with VSDs and 125 healthy children were included in this study. Genomic DNA was extracted from the buccal cells of all the subjects. The restriction fragment length polymorphism polymerase chain reaction (PCR-RFLP) method was carried out to amplify the A66G and C524T polymorphism of MTRR and C677T polymorphism of MTHFR genes digested with Hinf1, Xho1 and Nde1 enzymes, respectively. The genotype frequencies of CC, CT and TT of MTRR gene among the studied cases were 43.1%, 40.7% and 16.3%, respectively, compared to 52.8%, 43.2% and 4.0%, respectively among the controls. For the MTRR A66G gene polymorphism, the genotypes frequencies of AA, AG and GG among the cases were 33.3%, 43.9% and 22.8%, respectively, while the frequencies were 49.6%, 42.4% and 8.0%, respectively, among control subjects. The frequencies for CC and CT genotypes of the MTHFR gene were 51.2% and 48.8%, respectively, in VSD patients compared to 56.8% and 43.2% respectively, in control subjects. Apart from MTHFR C677T polymorphism, significant differences were noticed (p < 0.05) in C524T and A66G polymorphisms of the MTRR gene between cases and control subjects.