Thermodynamic evaluation of integrated gasification combined cycle: Comparison between high‐ash and low‐ash coals

In the present study, a coal‐integrated gasification combined cycle power plant is simulated. A high‐ash coal and low‐ash coal are considered to compare the performance of the plant. The combined cycle is in typical commercial size with 450 MW capacity. The feeds are Tabas and Illinois #6 coals which approximately contain more than 30% and 10% ash and have higher heating values of 22.7 MJ/kg and 26.8 MJ/kg, respectively. Energy and exergy analyses are done by aspen plus ^® and ees , respectively. Energy analysis shows that the overall efficiencies of power plants using high‐ash and low‐ash coals are 33% and 28%, respectively. The result shows that in high‐ash case, 52 kg/s coal, 10 kg/s water, and 1050 kg/s air and in low‐ash case, 48 kg/s coal and 820 kg/s air are required for providing mentioned power, approximately. Exergy analysis shows that maximum exergy destruction is in heat recovery steam generator unit. Investigating the emissions shows that high percent of ash in the coal composition has slight effects on the IGCC pollution. Finally, from thermodynamic viewpoint, it is concluded that the high‐ash coal, like the conventional one, can be used as thermally efficient and environmentally compatible feed of IGCCs. Copyright © 2016 John Wiley & Sons, Ltd.     

Kinetic Modeling of the Gas Antisolvent Process for Synthesis of 5‐Fluorouracil Nanoparticles

Mathematical modeling for 5‐fluorouracil (5‐FU) nanoparticle synthesis via gas antisolvent (GAS) process was investigated. 5‐FU was precipitated from a dimethyl sulfoxide (DMSO) solution using CO₂ as antisolvent. The particle size was controlled by nucleation and growth rates, therefore, the kinetic modeling study is essential. Thermodynamic modeling was applied to determine optimal operating conditions for experimental 5‐FU synthesis. Kinetic parameters were evaluated by fitting the particle size distribution predicted by the model to experimental data. The experimental and modeling results indicated that the particle size decreased with increasing the antisolvent addition rate.     

Discussion on “Enhancement of combined heat and power economic dispatch using self adaptive real-coded genetic algorithm,by P. Subbaraj et al., Applied Energy 86 (2009) 915–921.”

The paper studied by Subbaraj et al. (2009) considers the feasibility of using self adaptive real-coded genetic algorithm for enhancement of combined heat and power economic dispatch. The paper includes some problems about the considered feasible operating region. In this discussion, the controversial point of the paper are given.     

Practical Implementation of Novel Robust Position Control Scheme for Synchronous Reluctance Motor

A variable structure robust position controller is presented for a three-phase synchronous reluctance motor. Linear control and variable structure control and pulse-width modulation generation are combined. These provide robust, fast, and accurate position control without the penalty of high chattering. Schemes, including conventional sliding-mode control and the proposed scheme, are tested under parameter variations, and sudden perturbations are applied to the system at a specific time, then compared. This scheme uses both advantages of traditional variable structure control methods and linear methods. The disadvantages of each method, such as chattering and parameter sensitivity, are minimized. Results demonstrate that the proposed technique preserves the classical linear position control merits, while both the steady-state and transient behavior are significantly improved in terms of robustness, accuracy, and low ripple. The results also prove that the position reference command is perfectly tracked in spite of motor parameter uncertainties and load torque disturbance in control of the system that uses the new schemes.     

CFD Process Modeling of the Industrial Calcination of Diatomite

Calcination of diatomite is an expensive process frequently resulting in products with unpredictable structure. Alternatively, calcination in swirling flow is an energy‐saving option. Computational fluid dynamics modeling of an experimental calcination process unit is presented. Experimental results and systematic collection of process data were used to define boundary condition for steady‐state and transient simulation runs. The comparison of experimental and simulation results shows the complexity of the calcination process. The results can be used for further process optimization.     

Time‐domain hybrid formulations for wave simulations in three‐dimensional PML‐truncated heterogeneous media

We are concerned with the numerical simulation of wave motion in arbitrarily heterogeneous, elastic, perfectly‐matched‐layer‐(PML)‐truncated media. We extend in three dimensions a recently developed two‐dimensional formulation, by treating the PML via an unsplit‐field, but mixed‐field, displacement‐stress formulation, which is then coupled to a standard displacement‐only formulation for the interior domain, thus leading to a computationally cost‐efficient hybrid scheme. The hybrid treatment leads to, at most, third‐order in time semi‐discrete forms. The formulation is flexible enough to accommodate the standard PML, as well as the multi‐axial PML. We discuss several time‐marching schemes, which can be used à la carte, depending on the application: (a) an extended Newmark scheme for third‐order in time, either unsymmetric or fully symmetric semi‐discrete forms; (b) a standard implicit Newmark for the second‐order, unsymmetric semi‐discrete forms; and (c) an explicit Runge–Kutta scheme for a first‐order in time unsymmetric system. The latter is well‐suited for large‐scale problems on parallel architectures, while the second‐order treatment is particularly attractive for ready incorporation in existing codes written originally for finite domains. We compare the schemes and report numerical results demonstrating stability and efficacy of the proposed formulations. Copyright © 2014 John Wiley & Sons, Ltd.     

Sulfidation and regeneration of iron-based sorbents supported on activated-chars prepared by pressurized impregnation for coke oven gas desulfurization

The sulfidation and regeneration properties of lignite char-supported iron-based sorbent for coke oven gas (COG) desulfurization prepared by mechanical stirring (MS), ultrasonic assisted impregnation (UAI), and high pressure impregnation (HPI) were investigated in a fixed-bed reactor. During desulfurization, the effects of process parameters on sulfidation properties were studied systematically. The physical and chemical properties of the sorbents were analyzed by X-ray diffraction (XRD), scanning electron microscope coupled with energy dispersive spectroscopy (SEM-EDS), Fourier transform infrared (FTIR) and BET surface area analysis. The results of desulfurization experiments showed that high pressure impregnation (HPI) enhanced the sulfidation properties of the sorbents at the breakthrough time for char-supported iron sorbents. HPI method also increased the surface area and pore volume of sorbents. Sulfur capacity of sorbents was enhanced with increasing sulfidation temperatures and reached its maximum value at 400 °C. It was observed that the presence of steam in coke oven gas can inhibit the desulfurization performance of sorbent. SO₂ regeneration of sorbent resulted in formation of elemental sulfur. HPIF10 sorbent showed good stability during sulfide-regeneration cycles without changing its performance significantly.     

Carbon nanotubes growth on sub-surface catalyst layer of Cu–Ni nanoparticles thin film

Cu–Ni nanoparticles (NPs) thin films were prepared by Direct Current (DC) magnetron sputtering with Cu and Ni targets. The products were used as catalysts for Thermal CVD (TCVD) growing of carbon nanotubes (CNTs) from acetylene gas at 825°C. In order to characterize the nano catalysts, X-ray Diffraction (XRD) and Atomic Force Microscopy (AFM) and to study the synthesized CNTs Scanning Electron Microscopy (SEM) and Raman Spectroscopy were applied. A remarkable CNT grown on the sub-surface of catalyst layer compared to its top is deduced from SEM images. Despite the poor catalytic activity of the top-surface, these considerations led us to conclude more catalytic activity of the sub-surface.     

Effect of different size of joint enlargement on seismic behavior of gravity load designed RC beam‐column connections

Effect of different size of planer joint enlargement as a noninvasive and practical strategy for seismic retrofit of gravity load designed external reinforced concrete beam‐column connections was experimentally investigated. The joint region was enlarged using steel angles that are mounted using prestressed cross‐ties. Reverse cyclic load tests on five half‐scale control and retrofitted external RC beam‐column connections were conducted. Three different size of planer joint enlargement being 180, 140, and 90 mm were considered for retrofitted specimens. The performance of the retrofitted specimens is compared with that of the control gravity load designed beam‐column connections, in terms of load–displacement hysteresis curve, energy dissipation and ductility capacities, and global strength and stiffness degradation behavior. The experimental results showed that increasing the size of planer joint enlargement significantly enhances the seismic capacity of the retrofitted connections, in terms of strength, stiffness, energy dissipation, and ductility capacity and also planer joint enlargement can relocate beam plastic hinges to outside the joint panel.