Consumption of c9,t11-18:2 or t10,c12-18:2 enriched dietary supplements does not influence milk macronutrients in healthy, lactating women

Substantial research suggests that the t10,c12–18:2, but not the c9,t11–18:2, isomer of conjugated linoleic acid (CLA) reduces milk fat synthesis in lactating bovine and rodent species. Because fat is the major energy-yielding component in human milk, we were interested in whether this is true for women as well. Thus, the effects of c9,t11–18:2 and t10,c12–18:2 on milk fat were examined in breast-feeding women (n = 12) in a double-blind, placebo-controlled, crossover study with latin-square design. The study was divided into six periods: baseline (3 days), three intervention periods (5 days each), and two washout periods (9 days each). During each intervention period, women consumed 750 mg/day of a supplement containing predominantly c9,t11–18:2, t10,c12–18:2, or 18:1 (olive oil placebo). Milk was collected by complete breast expression on the final day of each period. Infant milk consumption was estimated by 24 h weighing on the penultimate day of each intervention and washout period, and maternal adiposity (% body fat) was determined at baseline using dual energy X-ray absorptiometry. Milk c9,t11–18:2 and t10,c12–18:2 concentrations were greater (P < 0.05) during the corresponding CLA treatment periods as compared to the placebo period, providing strong evidence of subject compliance. Both CLA isomers were transferred into milk fat at relatively high efficiency; average transfer efficiency was estimated to be 23.3%. Compared to the placebo treatment, milk fat content was not reduced during either CLA treatment. Data indicate that body fatness did not modify any putative effect of isomeric CLA consumption on milk fat concentration. The evidence from this study suggests that the sensitivity of lactating women’s mammary tissue to an anti-lipogenic effect of the t10,c12–18:2 isoform of CLA may be less than previously hypothesized.     

Synthesis,characterization and thermal behaviors of polymers containing organosilicon groups

Various bis(silyl)ethenyl groups were attached to the aromatic ring of poly(α-methylstyrene) via Peterson olefination reaction of (RMe₂Si)₃CLi (R = H, Me and Ph) with formylated poly(α-methylstyrene) (Pα-MS-CHO) to give poly(α-methylstyrene)-co-[2,2-bis(silyl)ethenyl(α-methylstyrene)] as functionalized poly(α-methylstyrene) (Pα-MS-SiMe₂H, Pα-MS-SiMe₃ and Pα-MS-SiMe₂Ph). The trimethylsilyl groups of Pα-MS-SiMe₃ have been converted to 2,2-dibromoethenyl and epoxybis(silanes) groups via NBS-based bromodesilylation and MCPBA-based epoxidation respectively. The thermal degradation behaviors of the polymers were studied using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC).     

Using a Short Wavelength Infrared (SWIR) hyperspectral imaging system to predict alpha amylase activity in individual Canadian western wheat kernels

Sprout damage (pre-harvest germination) in wheat results in highly deleterious effects on end-product quality. Alpha-amylase, the pre-dominant enzyme in the early stage of sprouting has the most damaging effect. This paper introduces a new method using a SWIR hyperspectral imaging system (1000–2500 nm) to predict the α-amylase activity of individual wheat kernels. Two classes of Canadian wheat, Canada Western Red Spring (CWRS) and Canada Western Amber Durum (CWAD), with samples of differing degrees of sprout damage were investigated. Individual kernels were first imaged with the hyperspectral imaging system and then the α-amylase activity of each kernel was determined analytically. Individual kernel α-amylase activity prediction was significant (R ² 0.54 and 0.73) for CWAD and CWRS, respectively using Partial Least Square regression on the hyperspectral data. A classification method is proposed to separate CWRS kernels with high α-amylase activity level from those with low α-amylase activity giving an accuracy of above 80%. This work shows that hyper/multi-spectral imaging techniques can be used for rapidly predicting the α-amylase activity of individual kernels, detecting sprouting at early stage.     

Effect of nano-sized calcium carbonate on cure kinetics and properties of polyester/epoxy blend powder coatings

Today's strict environmental laws pose significant challenges for coating's formulators to look for eco-friendly products. Powder coatings, particularly polyester/epoxy blends have demonstrated their ability as alternatives to traditional solvent-borne coatings. Recently, the use of nanoparticles such as nano-CaCO₃ (nCaCO₃) has been suggested as a beneficial strategy towards powder coating application with improved properties. Here, we study the effect of nCaCO₃ on morphology, cure behavior, adhesion and hardness of polyester/epoxy systems. The nanoparticles shape, size and dispersion state were investigated through X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. Furthermore, isothermal cure characterization of the neat and filled systems was performed using a torque rheometer. The most important finding based on the rheological studies was the catalytic effect of nCaCO₃ on cure reaction of polyester/epoxy, leading to the shorter curing time. Moreover, the kinetic analyses of rheograms revealed a marked decrease in the activation energy of the cure process upon raising nCaCO₃ content. Interestingly, pull-off adhesion and hardness tests showed that the hardness and adhesion strength were dramatically increased by the addition of nCaCO₃ into the polyester/epoxy system compared to pure blend resin. Therefore, considering the strong competition in powder coating market, the use of nCaCO₃ as a commercial and inexpensive nanofiller is necessary not only to reduce the dwell time which has benefits in terms of the energy consumption and economics, but also to improve the performance of final polyester/epoxy coating.     

A novel concept for improved thermal management of the planar SOFC

A new design for the solid oxide fuel cell (SOFC) planar stack is proposed to minimise the thermal gradients in the cell. This design involves including a secondary air channel with flow in the counter direction to the cathodic air channel. The effectiveness of the new design is tested by means of a tank in series reactor (TSR) model of the SOFC. It is found that the new design is capable of reducing the steady state temperature difference across the cell to less than 2 K over a range of voltages, while satisfying the requirements on fuel utilisation (FU) and cell average temperature. This is achieved by manipulating the primary air channel inlet flow rate and the secondary air channel inlet temperature. More modelling and experimental studies are required to further investigate the proposed design.     

Energy inputs and crop yield relationship in potato production in Hamadan province of Iran

The aim of this study was to determine energy consumption and the relationship between energy input and yield for potato production in Kaboud Rahang region of Hamadan state. The data used in this study are collected by questionnaire. The results revealed that nitrogen fertilizer (39%), diesel (21%), seed (14.9%), water (7.5%) and manure (6.4%) consumed the bulk of energy. In the surveyed farms, average yield and energy consumption were calculated as around 28613.7 kg/ha, 92296.3 MJ/ha, respectively. The results also showed that energy ratio, specific energy and energy productivity were 1.1, 3.2 MJ/kg and 0.3 kg/MJ, respectively. An econometric model was developed to estimate the impact of energy inputs on yield by using parametric methods. For this purpose, potato yield, an endogenous variable was assumed to be a function of energy inputs: fertilizer manure, chemical, machinery, human, water for irrigation, diesel and seed. The empirical results indicated that variables: fertilizer, chemical, seed and human were found statistically significant and contributed to yield. Among statistically significant exogenous variables, seed, water for irrigation, chemical, human and fertilizer were ranked in terms of elasticities.     

Adaptive nonlinear control of pH neutralization processes using fuzzy approximators

In this paper, an adaptive control scheme, based on fuzzy logic systems, for pH control is addressed. For implementation of the proposed scheme no composition measurement is required. Stability of the closed-loop system is established and it is shown that the solution of the closed-loop system is uniformly ultimately bounded and under a certain condition, asymptotical stability is achieved. Effectiveness of the proposed controller is tested through simulation and experimental studies. Results indicate that the proposed controller has good performances in set-point tracking and load rejection and much better than that of a tuned PI controller.     

Stress-controlled direct shear testing of geosynthetic clay liners II: Assessment of shear behavior

This paper is the second of a two-paper set on stress-controlled direct shear testing of geosynthetic clay liners (GCLs). Design of the apparatus, preliminary experiments, and shear deformation mechanisms in heat-treated and non-heat treated needle-punched (NP) GCLs were discussed in Part I. The objective of Part II (this paper) was to evaluate the effects of physical factors (i.e., peel strength and initial normal stress, σ_ni), environmental factors (i.e., temperature and hydration solution), and creep on the internal shear behavior of NP GCLs. In addition, failure conditions of GCLs in the stress-controlled direct shear tests were compared to displacement-controlled direct shear tests to verify results. An increase in internal shear strength developed from increased GCL peel strength or increased normal stress. Elevated temperatures were observed to decrease internal shear strength for both non-heat treated and heat-treated NP GCLs. Specimens hydrated with a calcium-rich synthetic mining solution experienced increased internal shear strength due to cation exchange in the bentonite, whereas specimens hydrated with a highly alkaline synthetic mining solution experienced decreased internal shear strength. Creep tests revealed an increase in time-to-failure with decrease in applied shear stress. Finally, stress states at failure from stress-controlled and displacement-controlled shear tests corresponded to a unique failure envelope, which validates the efficacy of using stress-controlled direct shear tests to assess internal shear behavior and shear strength of NP GCLs.     

Correlation of growth and aflatoxin production by Aspergillus flavus with some essential metals in gamma irradiated crushed corn

The effects of gamma irradiation and some essential metals on growth and aflatoxin B1 production by Aspergillus flavus in crushed corn were investigated. The production of aflatoxin by A. flavus was influenced by the addition of zinc, copper or iron and the effect gradually decreased with increasing metal concentration from 0 to 300 ppm. A. flavus grew and depleted zinc, copper and iron at initial concentration of 100, 200 or 300 ppm. Presence of 100 ppm zinc, copper or iron plus gamma irradiation (0.5, 1.0, 2.0 kGy) enhanced the growth of A. flavus and the production of aflatoxin in contrast with irradiated samples alone. A. flavus was able to metabolize and deplete elements in all gamma-irradiated samples. These results suggest that stricter control of element levels in gamma irradiated grains could control aflatoxin contamination.     

Analysis of deformations and stresses in balanced and unbalanced adhesively bonded single-strap joints

Adhesively bonded joints are increasingly being used in joining various structural components. Adequate understanding of the behaviour of adhesively bonded joints is necessary to ensure efficiency, safety and reliability of such joints. While several joint configurations, such as the single- and double-lap joints have received considerable consideration, the single-strap joint configuration has received little attention, partly because earlier studies have shown it to be the least efficient.

One of the objectives of this paper is to demonstrate that strap joints can be as efficient as lap joints, as long as they are properly designed. This will be done through a detailed analytical investigation into influence of the parameters that govern peak stresses in the adhesive. The next objective is to produce simple equations by which the design of strap joint could be facilitated in an effective manner. For this, the developed analytical expressions are simplified and shown to provide accurate results. The derived solutions provide better insight into understanding the parameters that most influence the edge forces.