Cement take estimation using neural networks and statistical analysis in Bakhtiari and Karun 4 dam sites,in south west of Iran

Bulletin of Engineering Geology and the Environment - Water seepage from dam foundations causes reservoir water loss and raises the risk of dam instability. One method of remediation for...     

Application of cubic equation of state models in prediction of vapor–liquid equilibria for binary polyvinyl acetate/solvent solutions

The cubic equation of state (CEoS) is a powerful method for calculation of (vapor + liquid) equilibrium (VLE) in polymer solutions. Using CEoS for both the vapor and liquid phases allows one to calculate the non‐ideality of polymer solutions based on a single EoS approach. In this research, vapor–liquid equilibria calculations of polyvinyl acetate (PVAc)/solvent solutions were performed. In this approach, eight models containing PRSV and SRK CEoS separately combined with four mixing rules namely vdW1, vdW2, Wong–Sandler (WS), and Zhong–Masuoka (ZM) were applied to calculations of bubble point pressure. For the better prediction, the adjustable binary interaction parameters existing in any mixing rule were optimized. The results were very acceptable and satisfactory. Absolute average deviations (%AAD) between predicted results and experimental bubble point pressure data were calculated and presented. The capability of two cubic equations of state had a good agreement with experimental data and predict the correct type of phase behavior in all cases, but the performance of the PRSV + vdW2 was more reliable than the other models with 2.65% in AAD for total of solution systems. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40651.     

The Plasminogen–Activator Plasmin System in Physiological and Pathophysiological Angiogenesis

Angiogenesis is a process associated with the migration and proliferation of endothelial cells (EC) to form new blood vessels. It is involved in various physiological and pathophysiological conditions and is controlled by a wide range of proangiogenic and antiangiogenic molecules. The plasminogen activator–plasmin system plays a major role in the extracellular matrix remodeling process necessary for angiogenesis. Urokinase/tissue-type plasminogen activators (uPA/tPA) convert plasminogen into the active enzyme plasmin, which in turn activates matrix metalloproteinases and degrades the extracellular matrix releasing growth factors and proangiogenic molecules such as the vascular endothelial growth factor (VEGF-A). The plasminogen activator inhibitor-1 (PAI-1) is the main inhibitor of uPA and tPA, thereby an inhibitor of pericellular proteolysis and intravascular fibrinolysis, respectively. Paradoxically, PAI-1, which is expressed by EC during angiogenesis, is elevated in several cancers and is found to promote angiogenesis by regulating plasmin-mediated proteolysis and by promoting cellular migration through vitronectin. The urokinase-type plasminogen activator receptor (uPAR) also induces EC cellular migration during angiogenesis via interacting with signaling partners. Understanding the molecular functions of the plasminogen activator plasmin system and targeting angiogenesis via blocking serine proteases or their interactions with other molecules is one of the major therapeutic strategies scientists have been attracted to in controlling tumor growth and other pathological conditions characterized by neovascularization.     

Effect of Atmospheric Ageing on the Properties of Organosilicon (Pp-HMDSO) Thin Films

Silicon - This study reports the effect of ageing on plasma polymerized hexamethyldisiloxane (pp-HMDSO) thin films properties during 90 days storage in the atmosphere. The monitoring of...     

Inactivation of Enterobacter sakazakii in infant milk formula by gamma irradiation: determination of D10-value

ABSTRACT:  Enterobacter sakazakii is an emerging foodborne pathogen that has caused several cases of meningitis and necrotizing entercolitis in infants and has been associated with infant formulas. Five strains of E. sakazakii were inoculated individually into brain heart infusion broth and rehydrated or dehydrated infant milk formula and exposed to ionizing radiation. E. sakazakii strains in brain heart infusion broth and rehydrated infant milk formula (RIMF) were exposed to irradiation dose of up to 1 kGy while strains in dehydrated infant milk formula (DIMF) were exposed to irradiation dose of up to 9 kGy. The D₁₀-values were determined by using a linear regression model. Average calculated D₁₀-values ranged from 0.21 to 0.29 kGy, 0.24 to 0.37 kGy, and 1.06 to 1.71 kGy in brain heart infusion broth, RIMF, and DIMF, respectively. The results obtained from this study will be useful for powdered infant milk formula industries to reduce the risk associated with E. sakazakii .     

Simulation of gas–solid two-phase flow in the annulus of drilling well

This paper investigates the hydrodynamic behavior of gas–solid two-phase flow in the annular space of an air drilling well under different arrangements by using three-dimensional approach. Two-fluid model is used to solve the governing equations in the Eulerian–Eulerian framework. Effect of eccentricity and drill pipe rotation on the pressure drop, volume fraction and velocity profile are examined. The results are compared with available data in the literature and good agreement is found. The results show that the presence of solid particles in the annulus change the air velocity profile significantly and create two off-center peaks velocity close to the walls instead of one peak velocity in the middle. Eccentricity of drill pipe makes more accumulation of the cuttings in the smaller space of the annulus. Increasing the eccentricity increases pressure drop due to impact of particles with annulus wall and also particles collision with each other. Rotation of the drill pipe shifts maximum air velocity location toward smaller space of the annulus which results more uniform cutting distributions in the annulus and improvement in their transportations. Pressure drop in the annulus increases as eccentricity and rotation of drill pipe increase.     

Prediction of warp and weft yarn crimp in cotton woven fabrics

The aim of this study was to develop statistical models for the prediction of warp and weft crimp percentage of cotton woven fabrics. The developed models are based on the empirical data obtained from carefully developed 60 fabric samples with different yarn linear densities, fabric densities, and weave designs. The predictability and accuracy of the developed models was assessed by correlation analysis of the predicted and actual crimp values of another set of eight fabric samples which was not used for the development of models. The results show fairly good capability and accuracy of the prediction models.     

Hydrodynamics and mass transfer study of aliphatic alcohols in airlift reactors

Gas holdup and gas–liquid mass transfer coefficient were considered in an external airlift reactor. Air was sparged through some aliphatic alcohols (methanol, ethanol, n-propanol, and n-butanol) with different concentrations (0–1%, v/v). It was observed that gas holdup and mass transfer coefficient increased with increasing the number of carbons in alcohols. Furthermore, an increment in alcohols concentration increased gas holdup and mass transfer coefficient. The same behavior was observed in external and internal loop airlift reactors although gas holdup and mass transfer coefficient values were less than those of internal airlift reactor. According to the experiments, two correlations for gas holdup and mass transfer were developed.     

Influence of monovalent cations and CuO nanoparticles on X-nanozeolite in uranium anionic species separation from contaminated drinking water

The main purpose of this work was the modification of NaX nanozeolite using copper oxide nanoparticles and various monovalent cations such as K~+, Cs~+, and Ag~+in order to make the negatively charged zeolite surface accessible for anionic forms of uranium which are the most dominant species of uranium in the contaminated radioactive waters at natural p H. Various methods such as the X-ray fluorescence(XRF), X-ray powder diffraction(XRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FT-IR), and atomic absorption spectroscopy(AAS) were used to characterize the final synthesized absorbents. Batch technique was used to study the adsorption behavior of uranium ions from polluted drinking water by Na X nanozeolite and its modified forms. In order to better understand the performance of them, the results were compared with those that were obtained for synthesizing bulk NaX zeolite and Na-form of clinoptilolite natural zeolite. Preliminary results indicated that uranium sorption increased as the loading level of CuO nanoparticles on NaX nanozeolite increased from 2.1 wt% to 11.2 wt%. In addition,from the obtained data, an increase in uranium removal efficiency resulted as charge/ionic radius ratio of exchanged cation decreased. Also, the effect of contact time, solid–liquid ratio, initial concentration and temperature on the adsorption process was studied. It is worth mentioning that, in this study, the sorption of uranium was performed under natural conditions of pH and the presence of competing cations and anions which are available in drinking waters.     

CEO观点：在新兴市场中，微型蜂窝基站制造业者须保持弹性!

无线营运业者的目标，是提供充分的移动能力及无缝式的漫游，以为使用者确保能永久存取宽带连接功能。目前这个目标可透过移动电话网络达成．但其涵盖率于室内和偏远地区具有局限性，这也意味着并非所有使用者都能得到想要的无缝式涵盖率。