Stability analysis on single-phase natural circulation in Argonne lead loop facility

One-dimensional linear stability analysis was performed for single-phase lead–bismuth eutectic (LBE) natural circulation. The Nyquist criterion and a root search method were employed to find the linear stability boundary of both forward and backward circulations. It was found that the natural circulations could be linearly unstable in a high Reynolds number region. Increasing loop friction makes a forward circulation more stable, but destabilizes the corresponding backward circulation under the same heating/cooling conditions. The characteristic wavelength of an unstable disturbance is roughly equal to the entire loop length.     

固体超强酸S_2O_8~(2-)/SnO_2-SiO_2催化合成环己酮1,2-丙二醇缩酮

采用沉淀-浸渍法制备了固体超强酸S2O28-/SnO2-SiO2,以它为催化剂催化环己酮和1,2-丙二醇合成了环己酮1,2-丙二醇缩酮;考察了带水剂种类及用量、酮醇摩尔比、催化剂用量、反应时间对产品收率的影响,并用正交实验对反应条件进行了优化。实验结果表明,适宜的反应条件为:n(环己酮)∶n(1,2-丙二醇)=1∶1.6、催化剂用量为反应物料总质量的2.0%、带水剂环己烷用量5.0mL、反应时间50min。在此条件下,环己酮1,2-丙二醇缩酮收率达到91.47%;催化剂的稳定性良好,在重复使用5次后环己酮1,2-丙二醇缩酮收率为82.20%,活性下降的主要原因为催化剂表面积碳和吸附了有机物;经傅里叶变换红外光谱和气相色谱质谱分析表明,产物为环己酮1,2-丙二醇缩酮,纯度为100%。     

两个同心施转圆柱间的Taylor问题

本文推导了在修正双极坐标系下的Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程和讨论了它的基本流的扰动解     

An antinociceptive effect of the intraperitoneal injection of nifedipine in rats, measured by tail-flick test

The tail-flick (TF) technique was used to assess the antinociceptive properties of nifedipine (NIF) given intraperitoneally (i.p.). First, the most suitable intensity of the noxious stimulus (temperature of the bulb) has been ascertained and used in the main study. Male Sprague-Dawley rats received NIF, dissolved in dimethyl sulfoxide (DMSO) at the doses of 0.0, 0.5, 2, 5, 10 and 15 mg/kg, or control with no injection. For the main study, the noxious stimulus was limited to 15 sec (cut-off time) and TF latencies were recorded up to 120 min. The antinociceptive response was expressed as the area under the curve for each rat and analyzed by one-way ANOVA. The antinociceptive response to the lower doses of NIF (0.5 and 2 mg/kg) did not differ from control (no injection) and DMSO alone. Significance was found at 5, 10 and 15 mg NIF with no difference among the doses. However, there was an increasing tendency of the mean values from 0.5 to 15 mg NIF resulting in a positive correlation. The correlation coefficient was 0.32483 (p = 0.015) and regression equation Y = (19.37) x dose + 1320. Our data suggest that spinal mechanisms are involved in NIF-induced antinociception.     

Bcl-2 deregulation leads to inhibition of sodium butyrate-induced apoptosis in human colorectal carcinoma cells

Epidemiological studies have linked dietary fiber to the prevention of human colorectal cancer and suggest that short chain fatty acids such as butyric acid, which is produced by fermentation of dietary fiber in the large intestine, may be an important mediator of the protective effects of fiber. We investigated the role of Bcl-2 deregulation on the sensitivity of colorectal carcinoma cells to undergo butyrate-induced apoptosis. Here we report an inverse relationship between the levels of Bcl-2 and the sensitivity of colorectal carcinoma cell lines to undergo apoptosis in response to butyrate. Overexpression of Bcl-2 in colorectal carcinoma DiFi cells resulted in suppression of butyrate-induced apoptosis and enhanced cell survival in response to butyrate. Butyrate-induced apoptosis was accompanied by inhibition of expression of a 30 kDa protein (p30, immunorecognized by anti-Bcl-2 mAb) and this cellular effect of butyrate was inhibited by Bcl-2 overexpression. These findings suggest that deregulation of Bcl-2 in human colorectal carcinoma cells confers resistance to induction of apoptosis by butyrate, a dietary micronutrient.     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.