表面微观屈服强度与疲劳极限的关系SCIEI

本文利用X射线对不同碳含量钢的表面微观屈服强度进行了研究。试验结果表明,表面微观屈服强度σ_(ms)远低于整体材料的屈服限,是一个反映表面抵抗塑性变形能力大小的参量。材料光滑疲劳极限往往是由裂纹荫生所控制的,与表面抵抗塑性变形的能力有关。本试验表明不同材料的σ_(ms)与存活率为50％疲劳极限的关系为:σ_(ms)=(0.81—1.02)σ_(-1);40Cr不同热处理状态的σ_(ms)与存活率为99.9％疲劳极限的关系为:σ_(ms)=(0.98—1.10)σ_(-1)。σ_(ms)的测定要比疲劳极限σ_(-1)的测定省时得多,有可能在工程上获得应用。     

HIGH TEMPERATURE OXIDATION AND STRUCTURE OF SCALE AND WHISKERS FOR Fe-Ni-Cr SEALING ALLOYS

The oxidation rate,the growth,morphology and structure of oxide scale and whiskers forFe-Ni-Cr sealing alloys in H_2-H_2O atmosphere at high temperatures have been studied.The growth rate of scale is controlled by diffusion.The scale is composed of Cr_2O_3 andspinel(Fe,Mn)O·Cr_2O_3 and the oxide whisker,are spinel(Fe,Mn)O·Cr_2O_3.     

预应变对16MnR钢断裂韧性的影响SCIEI

本文实验发现预应变对16MnR钢的断裂韧性具有显著的影响,断裂过程中裂尖区域材料的组织结构发生了变化,裂纹在二次珠光体组织上扩展。16MnR钢断裂韧性的大小取决于碳原子的扩散及二次珠光体组织生成的难易程度。     

PREFERENTIAL SITE SATURATION FOR NUCLEATION AND GROWTH OF α-PHASE AT EARLY STAGE OF AUSTENITE DECOMPOSITION IN LOW CARBON STEEL BEARING BORON

借助经典体视学方法和“扩展组织”概念,定量研究了低碳硼钢620℃过冷奥氏体等温分解早期显微组织的演变路径。结果表明,母相晶界网络仍是低碳硼钢中α相形核长大的择优位置集合,择优顺序为晶粒棱(含隅)、晶界界面.棱集和隅集的位置饱和总是早于面集。钢中有效硼量对趋于饱和的路径和晶界面集的饱和迟早有显著影响。     

ADSORPTION MECHANISMS OF HS-IONS ON SULPHIDE MINERAL SURFACES RELATED TO Na_2S-INDUCED FLOTATION

The adsorption mechanisms of HS~- ions existing in air-saturated alkaline solutions on sulphide minerals (including pyrite, arsenopyrite, chalcopyrite and galena) were investigated. The measurement of adsorption density, solvent extraction-chemical analysis of neutral sulphur at the surfaces, measurements of pulp potential and voltammogram, and flotation tests were done. Both the electrochemical and non-electrochemi cal adsorption models of HS~- ions were established. The former was observed and resulted in the formation of neutral sulphur (S°)when the pyrite and arsenopyrite were chosen, and hence renders the surfaces hy drophobic and induced the two minerals flotation. It is called Na_2S-induced flotation. On the other hand, the latter took place and did not produce S° when the chalcopyrite and galena were selected, and hence de presses the collectorless flotation of the two minerals. The adsorptions of HS~- ions were mainly influenced by potentials, pH and the electron structures of the mineral surfaces.     

弧焊逆变电源的发展趋势分析

本文针对弧焊逆变电源中的几个关键问题，如功率开关器件的性能特点，增大输出变压器的功率，逆变电源的智能控制等，评述了当前的技术水平及今后的发展趋势。     

铸铁溶液中氧的含量及形态

本文研究了铸铁溶液中全氧量的变化,并用定氧探头检测了溶解氧量。研究表明,铁水中全氧量随冲天炉送风湿度增加而明显增大。铁水含氧量增高主要是化合氧增多。而溶解氧变化很小。     

高铬铸铁中铌碳化物的辨认

介绍了用背散射象法、彩色金相法和扫描电镜分析区别铬碳化物和铌碳化物。     

锻压机械打击力测量误差的加速度补偿

提出了锻压机械打击力测量中存在的问题，介绍了常用的补偿法，并通过实验验证了加速度补偿法是消除锻压机械打击力测量误差的有效途径。     

Ti-Al基合金中的Hall-Petch关系及影响因素分析

研究了全层片状组织Ti-Al基合金的室温拉伸性能与品团尺寸的关系。Ti-Al基合金的室温拉伸屈服强度和断裂强度与晶团尺寸成Hall-Petch关系。当合金中添加替代元素Cr和Nb时，其Hall-Petch斜率不变；而添加间隙元素C和B时，其Hall-Petch斜率增加。Ti-Al基合金的室温延伸率与晶团尺寸不满足Hall-Petch关系。