Symmetric coupling of multi‐zone curved Galerkin boundary elements with finite elements in elasticity

The coupling of Finite Element Method (FEM) with a Boundary Element Method (BEM) is a desirable result that exploits the advantages of each. This paper examines the efficient symmetric coupling of a Symmetric Galerkin Multi‐zone Curved Boundary Element Analysis method with a Finite Element Method for 2‐D elastic problems. Existing collocation based multi‐zone boundary element methods are not symmetric. Thus, when they are coupled with FEM, it is very difficult to achieve symmetry, increasing the computational work to solve the problem. This paper uses a fully Symmetric curved Multi‐zone Galerkin Boundary Element Approach that is coupled to an FEM in a completely symmetric fashion. The symmetry is achieved by symmetrically converting the boundary zones into equivalent ‘macro finite elements’, that are symmetric, so that symmetry in the coupling is retained. This computationally efficient and fast approach can be used to solve a wide range of problems, although only 2‐D elastic problems are shown. Three elasticity problems, including one from the FEM‐BEM literature that explore the efficacy of the approach are presented. Copyright © 2000 John Wiley & Sons, Ltd.     

A fully symmetric multi‐zone Galerkin boundary element method

This paper examines the efficient integration of a Symmetric Galerkin Boundary Element Analysis (SGBEA) method with multi‐zone resulting in a fully symmetric Galerkin multi‐zone formulation. In a previous approach, a Galerkin multi‐zone method was developed where the interfacial nodes are assigned degrees of freedom globally so that the displacement and traction continuity across the zonal interfaces are addressed directly. However, the method was only block symmetric. In the present paper, two new approaches are derived. In the first approach, the degrees of freedom for a particular zone are assigned locally, independent of the other zones. The usual linear set of equations, from the symmetric Galerkin approach, are augmented with an additional set of equations generated by the Galerkin form of hypersingular boundary integrals along the interfaces. Zonal continuity is imposed externally through Lagrange's constraints. This approach is also only block symmetric. The second approach derived from the first, uses the continuity constraints at the zonal assembly level to achieve full symmetry. These methods are compared to collocation multi‐zone and an earlier formulation, on two elasticity problems from the literature. It was found that the second method is much faster than the collocation method for medium to large scale problems, primarily due to its complete symmetry. It is also observed that these methods spend marginally more time on integration than the previous Galerkin multi‐zone method but are better suited to parallel processing. Copyright © 1999 John Wiley & Sons, Ltd.     

Physico-chemical characteristics of high performance polymer modified by low and atmospheric pressure plasma

In this work, the effect of low pressure plasma and atmospheric-pressure plasma treatment on surface properties and adhesion characteristics of high performance polymer, Polyether Ether Ketone (PEEK) are investigated in terms of Fourier Transform Infrared Spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and Atomic Force Microscopy (AFM). The experimental results show that the PEEK surface treated by atmospheric pressure plasma lead to an increase in the polar component of the surface energy, resulting in improving the adhesion characteristics of the PEEK/Epoxy adhesive system. Also, the roughness of the treated surfaces is largely increased as confirmed by AFM observation. These results can be explained by the fact that the atmospheric pressure plasma treatment of PEEK surface yields several oxygen functionalities on hydrophobic surface, which play an important role in increasing the surface polarity, wettability, and the adhesion characteristics of the PEEK/Epoxy adhesive system.     

Synthesis, characterization, photophysical properties of a novel organic photoswitchable dyad in its pristine and hybrid nanocomposite forms

In the present paper the method of synthesis and characterization of a novel organic dyad, 3-(1-Methoxy-3,4-dihydro-naphthalyn-2-yl-)-1-p-chlorophenyl propenone, have been reported. In this paper our main thrust is to fabricate new hybrid nanocomposites by combining the organic dyad with different noble metals, semiconductor nanoparticle and noble metal-semiconductor core/shell nanocomposites. In this organic dyad, donor part is 1-Methoxy-3, 4-dihydro-naphthalen-2-carboxaldehyde with the acceptor p-chloroacetophenone. We have carried out steady state and time-resolved spectroscopic measurements on the dyad and its hybrid nanocomposite systems. Some quantum chemical calculations have also been done using Gaussian 03 software to support the experimental findings by theoretical point of view. Both from the theoretical predictions and NMR studies it reveals that in the ground state only extended (E-type or trans-type) conformation of the dyad exists whereas on photoexcitation these elongated conformers are converted into folded forms (Z- or cis-type) of the dyad, showing its photoswitchable character. Time resolved fluorescence spectroscopic (fluorescence lifetime by TCSPC method) measurements demonstrate that in chloroform medium all the organic-inorganic hybrid nanocomposites, studied in the present investigation, possess larger amount of extended conformers relative to folded ones, even in the excited singlet state. This indicates the possibility of slower energy destructive charge recombination rates relative to the rate processes associate with charge-separation within the dyad. It was found that in CHCl3 medium, the computed charge separation rate was found to be approximately 10(8) s(-1) for the dyad alone and other hybrid nanocomposite systems. The rate is found to be faster than the energy wasting charge recombination rate approximately 10(2)-10(1) s(-1), as observed from the transient absorption measurements for the corresponding hybrid systems. It indicates the conformational geometry has a great effect on the charge-separation and recombination rate processes. The suitability for the construction of efficient light energy conversion devices especially with Ag-Dyad nanocomposite of all the systems studied here is hinted from the observed long ion-pair lifetime.     

Natural convection heat transfer and entropy generation inside porous quadrantal enclosure with nonisothermal heating at the bottom wall

In this work, we study numerically the natural convection heat transfer and entropy generation characteristics inside a two-dimensional porous quadrantal enclosure heated nonuniformly from the bottom wall. The effect of Darcy number is significant in dictating the Nusselt number only for higher values of Rayleigh number and the variation is more profound for larger values of Darcy number. The variation of entropy generation rate is significant with the Darcy number only for higher values of Rayleigh number. The entropy generation due to heat transfer is the significant contributor of irreversibility at low values of Darcy number, while for larger values of Darcy number and Rayleigh number entropy generation due to fluid friction becomes dominant.     

Influence of phase modifiers on morphology and properties of thermoplastic elastomers prepared from ethylene propylene diene rubber and isotactic polypropylene

A series of thermoplastic elastomers (TPEs) were prepared from a binary blend of ethylene propylene diene rubber (EPDM) and isotactic polypropylene (iPP) using different types of phase modifiers. The influence of sulphonated EPDM, maleated EPDM, styrene‐ethylene‐co‐butylene‐styrene block copolymer, maleated PP, and acrylated PP as phase modifiers showed improved physico‐mechanical properties (like maximum stress, elongation at break, moduli, and tension set). Scanning electron and atomic force microscopy studies revealed better morphologies obtained with these phase modified EPDM‐iPP blends. The dependence of the phase modifier type and concentration was optimized with respect to the improvement in physical properties and morphology of the blends. Physical properties, dynamic mechanical properties, and morphology of these blends were explained with the help of interaction parameter, melt viscosity, and crystallinity of the blends. Theoretical modeling showed that Kerner, Ishai‐Cohen, and Paul models predicted the right morphology–property correlation for the prepared TPEs. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers.     

Augmenting the performance of acrylonitrile–butadiene–styrene plastics for low‐noise dynamic applications

The main objective of this study was to enhance the performance of acrylonitrile–butadiene–styrene (ABS) plastics for dynamic structural applications, including those of automobile relevance. First, ABS was modified by blending with maleic anhydride grafted styrene–ethylene–butadiene–styrene block copolymer (MA‐g‐SEBS) in various proportions. Squeaking noise characteristics were evaluated by measurement of the frictional behavior in an in‐house fabricated friction testing apparatus, and the results are explained on the basis of the change in surface energy upon modification. Detailed dynamic mechanical analyses (strain, frequency, and temperature sweep) revealed significant improvements in the damping characteristics of the modified ABS, especially that modified with 10 wt % MA‐g‐SEBS, without much sacrifice in its mechanical strength. The modulus values predicted with Kerner's model of the blends were well correlated with the morphological changes upon modification. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Construction and generation of OCDMA code families using a complete row-wise orthogonal pairs algorithm

A new code construction algorithm for incoherent Multi-Dimensional Optical Code Division Multiple Access (MD-OCDMA) for asynchronous fiber optic communication is proposed. We refer multi-dimensionality to two-dimensional (2D) wavelength–time or space–time domains and three-dimensional (3D) space–wavelength–time domains. The application of the algorithm in constructing 2D multiple pulses per row codes and 3D multiple pulses per plane codes is given. The performance of the codes is discussed. In the applications discussed, this construction ensures a maximum crosscorrelation of 1 between any two codes. The proposed codes have complete 1D code allocation, which increases the cardinality. The performance of some codes in literature is compared with the proposed codes. The analyzed performance measure is bit error rate due to multiple access interference for different numbers of active users. The performance analysis shows that the proposed 2D construction offers very low bit error rate at lower spectral efficiency when compared with other 2D constructions. A comparison of the proposed 3D construction with existing 3D constructions shows lower bit error rate for equivalent code dimension. New integrated optic designs for the generation of OCDMA codes using titanium indiffused lithium niobate technology are explored, which can enable compact encoders and decoders for computer communications.