Rare-earth-enabled universal solders for microelectromechanical systems and optical packaging

In packaging of microelectromechanical systems (MEMS), optical, and electronic devices, there is a need to directly bond a wide variety of inorganic materials, such as oxides, nitrides, and semiconductors. Such applications involve hermetic-sealing components, three-dimensional MEMS assembly components as well as active semiconductor or optical components, dielectric layers, diffusion barriers, waveguides, and heat sinks. These materials are known to be very difficult to wet and bond with low melting-point solders. New Sn-Ag- or Au-Sn-based universal solders doped with a small amount of rare-earth (RE) elements have been developed, which now allow direct and powerful bonding onto the surfaces of various MEMS, optical, or electronic device materials. The microstructure, interface properties, and mechanical behavior of the bonds as well as the potential packaging applications of these new solder materials for MEMS and optical fiber devices are described. Various packaging-related structural, thermal, or electrical issues in MEMS are also discussed.     

High voltage (>1kV) and high current gain (32) 4H-SiC power BJTs using Al-free ohmic contact to the base

This letter reports the design and fabrication of 4H-SiC bipolar junction transistors with both high voltage (>1kV) and high dc current gain (/spl beta/=32) at a collector current level of I/sub c/=3.83A (J/sub c/=319 A/cm/sup 2/). An Al-free base ohmic contact has been used which, when compared with BJTs fabricated with Al-based base contact, shows clearly improved blocking voltage. A specific on-resistance of 17 m/spl Omega//spl middot/cm/sup 2/ has been achieved for collector current densities up to 289 A/cm/sup 2/.     

电液同步控制筒阀在小浪底水电厂的应用

小浪底水电厂位于多泥沙的黄河干流上，水轮机活动导叶会因磨损过大而严重漏水，在水轮机的设计上必须考虑这个因素;同时，为适应混水发电，小浪底水电厂机组采用了筒阀。文中介绍了筒阀的结构特点、功能及控制原理等，并对其在现场的实际应用情况进行了分析。     

含腐蚀凹坑尿素合成塔的安全评定与分析

对尿素合成塔上封头腐蚀凹坑采用中国SAPV-95和美国API579规范分别进行安全评定，给出安全裕度，简略分析安全评定的结果。     

一种降低OFDM信号PAPR的新方法

正交频分复用(OFDM)技术的一个缺点是信号的高峰值平均功率比(PAPR)大大降低了系统中线性功放的效率。本文提出一种新的基于Nyquist脉冲成形的PAPR抑制方法。这种方法基于选择适当的Nyquist脉冲波形集合对OFDM的各个子载波进行脉冲成形。分析论证了该方法的PAPR上限值和所用的脉冲成形波形集合。仿真结果表明该方法能有效降低任意子载波数目的OFDM信号的PAPR值,而且与已有方法相比应用更为简单。因此脉冲成形技术不仅能对传输信号进行频谱成形来提高系统的频带利用率,而且还可以减小信号的PAPR值。     

ELL系列外测液位仪及其应用

简单介绍了外测液位仪的原理及其特点——可用于最苛刻环境、安全、环保、方便、经济、耐用、可靠、精确。并和其他类型的液位计进行了性能对比。该液位仪有效地解决了长期困扰石油、石化、化工行业对储罐内装有易燃易爆、腐蚀性强、剧毒、高纯度等介质液位高度测量的难题。     

湿H2S环境中金属材料腐蚀的研究

介绍了在湿H2S环境中金属材料的腐蚀试验标准、方法和手段并重点强调了在H2S试验过程中常遇到的一些问题的处理方法.最后,指出了应加强H2S腐蚀的基础性和系统性研究的研究方向.     

Influence of fretting on the fatigue strength at the vise clamp-specimen interface

Fretting fatigue is one of the most important phenomena for inducing a significant reduction of fatigue strength and consequently, leading to unexpected failure accidents of the engineering structures even at very low stresses. In the present study, both plain and fretting fatigue tests with zero mean stress were carried out on two different types of steel, low-carbon steel and martensitic stainless steel, by means of a reversed bending fatigue testing machine. The drop in the fatigue strengths through fretting at vise clamp-specimen interface were significant for both tested steels. The fretting processes produced a reduction in fatigue strength of about 27% for low-carbon steel and 16% for martensitic stainless steel.     

中小建材企业如何筹措资金

中小建材企业的地位及现状　　按照国家计委,统计局,经贸委和财政部对《大中型企业划分标准》的修订,中型企业的标准为年销售收入和资产总额均在5000万～5亿元之间,小型企业的标准为年销售额和资产总额在5000万元以下。　　在我国企业中,中小企业在数量上占绝大多数。目前,在全国注册登记的企业中,中小企业占全国企业总额的99%,中小企业在全国工业生产总值中约占60%,实现利税约占40%,中小企业提供的就业岗位占全国城镇就业人数的75%,而我国建材企业的中小型化更为突出,目前,全行业各类企业22万余家,大型企业充其量不过数百家,中小企业的比重…