Constant Modulus Algorithm for Cochannel Signal Separation in Non-Gaussian Impulsive Noise Environments

The separation of cochannel signals is of interest in communication community. Some algorithms based on constant modulus (CM) have been previously developed to separate cochannel signals with the assumption of Gaussian channel noise. The mismatches of noise models between the assumed channel noise and the practical noise may occur. These mismatches will inevitably lead the performance of cochannel signals separation to degrade. In this paper the alpha-stable distribution is employed as noise model to simulate impulsive noise occurring in wireless channel. A constant modulus algorithm is proposed to separate the cochannel signals based on fractional lower-order statistics (FLOS). The convergence of the CM array is analyzed. Numerical simulations are presented to verify the accuracy of the analytical results.     

Two-Tier,Scalable and Highly Resilient Key Predistribution Scheme for Location-Aware Wireless Sensor Network Deployments

We propose a probabilistic key predistribution scheme for wireless sensor networks, where keying materials are distributed to sensor nodes for secure communication. We use a two-tier approach in which there are two types of nodes: regular nodes and agent nodes. Agent nodes are more capable than regular nodes. Our node deployment model is zone-based such that the nodes that may end up with closer positions on ground are grouped together. The keying material of nodes that belong to different zones is non-overlapping. However, it is still possible for nodes that belong to different zones to communicate with each other via agent nodes when needed. We give a comparative analysis of our scheme through simulations and show that our scheme provides good connectivity figures at reasonable communication cost by using minimal flooding in key distribution. Moreover, we show that our scheme is scalable such that no extra overhead in incurred in case of increased number of nodes and sensor field size. Most importantly, simulation results show that our scheme is highly resilient to node captures.     

Identification of a class of two CFOA-based sinusoidal RC oscillators

Using a unified representation for a class of the two current-feedback operational amplifier (CFOA) sinusoidal oscillators, new circuits of this type can be systematically discovered. A catalogue of two circuit structures, each structure realizing 18 oscillator circuits, is presented. Moreover, using the RC:CR transformation, additional 18 oscillator circuits can be obtained from each structure. A third structure realizing additional two oscillator circuits is also presented. Some of the circuits enjoy one or more of the following attractive features: use of grounded capacitors, feasibility of absorbing the parasitic components of the CFOAs, availability of a buffered output voltage and orthogonal tuning of the frequency and the startup condition of oscillation. Moreover, it is shown that the use of the Barkhausen criterion for the determination of the startup condition of oscillation and the frequency of oscillation yields inaccurate results with relatively large errors depending on the selected component values. Furthermore, it is shown that using the roots of the characteristic equation of a specific oscillator structure will result in a startup condition that cannot be adjusted without disturbing the frequency of oscillation.     

A power efficient continuous time ΔΣ modulator with 15 MHz bandwidth and 70 dB dynamic range

A state variable block diagram method is given for the realization of universal biquadratic transfer functions employing second-generation current-controlled conveyors (CCCIIs). Using minimum number of passive components and properly adjusting the bias currents of CCCIIs, the proposed circuits can realize all the tunable frequency standard filter functions: high-pass, band-pass, low-pass, notch-pass, and all-pass by choosing appropriate input branches without changing the passive elements. These presented circuits are in current-mode and voltage-mode separately. The non-ideality analyses of these configurations are given. Additionally, a high-order low-pass filter derived from the proposed voltage-mode biquadratic filter is introduced. PSPICE simulation results are included to verify the theory.     

A Cryo-XPS Study of Triammonium Citrate-KAuCl<Subscript>4</Subscript>-Na<Subscript>2</Subscript>SO<Subscript>3</Subscript> Electroplating Solutions for Pb-Free Solder Packaging

Cyanide-free Au plating baths, containing KAuCl₄, triammonium citrate, and sodium sulfite, have been developed by the authors. The stability of these solutions depends on the order of mixing of the additives. The aim of this study was to employ turbidity measurements and cryogenic x-ray photoelectron spectroscopy (XPS) to identify the role of the additives and the complexes responsible for solution stability or degradation. Electron microscopy was used to characterize any precipitation products generated in the solutions. It was shown that the long-term stability of the solutions is due to the role of citrate and sulfite as complexing agents.     

A channel assignment algorithm via conflict shifting for distributed cognitive networks

Channel assignment is a challenge for distributed cognitive networks due to spectrum mobility and lack of centralized entity. We present a dynamic and efficient algorithm via conflict shifting, referred as Shifting-based Channel Assignment (SCA). In this algorithm, the system was modeled with a conflict graph, and users cannot assign the channels that primary users (legacy users) and neighbors already occupied. In order to eliminate the conflicts between neighbors efficiently, secondary users (unlicensed users) try to transfer them through a straight path to the boundary, where conflicts are easier to solve as there are less neighbors for boundary users. Actions in one shift are executed in slots, and users act in a synchronous and separated manner. As a result, some of the conflicting channels are avoid from directly abandoned, and for this, utility of the entire network can be improved. Simulation results show that the proposed algorithm can provide similar utility performance while obviously reducing the communication cost than bargaining-base algorithms. In small scale networks with low user mobility (under 20%), it reduces 50% of the communication overhead than the later.     

Flight Model Performance of 640-GHz Superconductor–Insulator–Superconductor Mixers for JEM/SMILES Mission

Performances of 640-GHz Superconductor–Insulator–Superconductor (SIS) mixers developed for the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) mission are described. SMILES, launched in September 2009, is the first mission to observe atmosphere from space using superconducting mixers. Ground test performances of the SIS mixers show very flat gain and noise characteristics in their observation bands in compliance with the specifications required for SMILES.     

Design of a laminated current cell relocation 12-bit CMOS D/A converter with a high output impedance technique and a merged switching logic

A compact and low power 12-bit 300 MS/s current steering CMOS D/A converter is presented. The architecture of the D/A converter is based on the current steering 6 + 6 segmented type with a laminated current cell relocation technique. In order to improve the linearity and glitch noise, a high output impedance analog current cell is designed. Furthermore, for the purpose of reducing the chip area and power dissipation, a noble merged switching logic and a compact layout technique are proposed. To verify its performance, the chip was fabricated with 0.13 μm thick-gate 1-poly 6-metal N-well Samsung CMOS technology. The effective chip area is 0.26 mm² (510 × 510 μm) with a power consumption of 100 mW. The measured INL and DNL are within ±3LSB and ±1LSB, respectively. The measured SFDR is about 70 dB, when the input frequency is 1 MHz at a clock frequency of 300 MHz.     

Modeling of Dynamic Effects in a Laser-Driven Semiconductor Switch of High-Power Microwaves

Problems of high-power microwaves penetrating into and reflecting from a semiconductor (silicon) plate with non-stationary processes are investigated. The plate is the basis of switches activated by laser-driven photoconductivity which changes its properties when heated by the switched microwave power. Analytical criteria for the stationary solutions of the activated (quasi-metallic) and deactivated (dielectric) states of the switch under the conditions of high-power microwave heating and external cooling are found. Results of numerical simulations are also given for the problems of the switch activation by microwave heating initiated by pulsed laser radiation, which increases the carrier density rapidly. Numerical simulations are carried out using the finite-difference time-domain method with the unsplit perfectly matched layer absorbing boundary conditions. We demonstrate various types of solutions depending on the basic parameters of the problems - microwave field intensity, laser pulse energy and semiconductor doping.     

A novel multicast routing algorithm in sparse splitting WDM network with power attenuation constraint

With the increasing requirement for communication bandwidth, all-optical network has been more and more important owning to its large traffic capability. Multicasting is an important technology in wavelength division multiplexing (WDM) optical network, and has been studied in many works. In this paper, we consider the multicasting technology on all-optical metropolitan area network (MAN) with maximum power attenuation constraint. The objective is to minimize total cost of a multicasting request. This problem is NP-hard. We propose a heuristic, named Power-Constraint Fix-Destination-Path (PC-FDP) algorithm, to solve this maximal power-loss constrained minimizing cost multicasting problem. It means that, during the process of building a multicasting tree, when a destination is reached and its power satisfies the constraint, the path from source to it would be fixed in the tree. Simulation results show that, all multicasting trees building the proposed algorithm satisfy the power constraint, with slight increasing of the total cost.