Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of Vernonia galamensis oil

Matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS) has been used to identify eight triacylglycerols (TAG) in Vernonia galamensis oil (VO). The TAG include trivernolin, divernoloylstearoylglycerol, divernoloyloleoylglycerol, vernoloyllinoleoylstearoylglycerol, vernoloyllinoleoyloleoylglycerol, and vernoloyldilinoleoylglycerol. Samples for the MALDI/TOF/MS analysis were prepared with alpha-cyano-4-hydroxycinnamic acid (matrix) in an acetonitrile/tetrahydrofuran solvent system. A mol ratio of matrix/VO (44:1) gave reproducible composite spectra, resulting in resolutions greater than 8,000 and signal-to-noise ratios of above 1000 for the most abundant molecular species. 1,3-Dioleoyl-2-stearoylglycerol and 1,2-dioleoyl-3-palmitoylglycerol were used as calibration standards.     

Influence of Pulse Electrodeposition and Heat Treatment on Microstructure,Tribological, and Corrosion Behavior of Nano-Grain Size Co-W Coatings

In the present study, Co-W nano-structured alloy coatings are produced on low-carbon steel substrate by means of pulse electrodeposition from a citrate-based bath under different average current densities and duty cycles. The results indicate that the coating deposited under 60% of duty cycle and 1 A/dm² of average current density exhibit optimum pulse plating conditions with 44.38 wt.% W, 37 nm grain size, and 758 HV microhardness. The effect of heat treatment temperature on microstructure, composition, corrosion behavior, and morphology of amorphous deposited Co-W alloy with 44 wt.% W was investigated. The microhardness of the coating increased to 1052 HV after heat treatment at 600 °C, which is due to the formation of Co₃W and CoWO₄ phases in the deposit. Furthermore, the coatings heat-treated at 600 °C had lower friction coefficients and better wear resistance under various loads than before heating.     

Structural,rheological, and mechanical properties of ternary blends of PEN,PET, and liquid crystalline polymer

Structural, rheological, and mechanical properties of ternary blends of a liquid crystalline copolyester (LCP) composed of p-hydroxybenzoic acid and 2,6-hydroxynaphthoic acid, poly(ehtylene naphthalate)(PEN), and poly(ethylene terephtalate) (PET) were investigated using capillary rheometry, tensile testing, scanning electron microscopy, and X-ray diffraction. Viscosity-shear rate behavior of the ternary blends is very similar to that of pure polymers and their binary blends. The activation energy of flows of the ternary blends was smaller than those of PEN and PET. Tensile modulus and strength of extruded strands of the blends increased with increasing LCP content. The extruded strands of the blends consist of a crystalline and oriented LCP phase and an amorphous and unoriented PEN/PET blended phase. Tensile mechanical properties and structures of the ternary blends were discussed.     

The isoxazolidines: the effects of steric factor and hydrophobic chain length on the corrosion inhibition of mild steel in acidic medium

Several new isoxazolidines having varying degree of steric environment and hydrophobic chain length, prepared efficiently using single-step nitrone cycloaddition reactions, are tested for corrosion inhibition of mild steel in 1 M and 5 M HCl at 50-70 °C range by gravimetric and electrochemical methods. All compounds have shown very good corrosion inhibition efficiency (IE%) in acidic solution. Steric crowding around the nitrogen centres and hydrophobic chain lengths as well as increase in temperature (in the presence of the inhibitor in the higher concentration range 100-400 ppm) are found to increase the inhibition efficiency of the isoxazolidines. Thermodynamic parameters (ΔG°_ads, ΔH°_ads, ΔS°_ads) for the adsorption process and kinetic parameters for the metal dissolution (or hydrogen evolution) reaction in the presence of one of the isoxazolidines were determined. Experimental results agree with the Temkin adsorption isotherm. The inhibition of corrosion in 1 M HCl, influenced by both physi- and chemi-sorption, was found to be under mixed control, but predominantly under cathodic control.     

A modern congestion pricing policy for urban traffic: subsidy plus toll

Railway Engineering Science - Congestion pricing is seen as an effective policy to address traffic congestion. In such policies where money, people and authorities are involved, the success...     

Morphological,mechanical, and rheological studies of PVC/ABS blends in the presence of maleic anhydride

A novel method of enhancing compatibility in PVC/ABS blends is the use of ABS‐grafted‐(maleic anhydride) (ABS‐g‐MAH) as a compatibilizer. In this study, maleic anhydride was grafted onto ABS (initiated by peroxide) in an internal mixer. Grafting degree was determined by a back‐titration method, and certain amounts of the resultant ABS‐g‐MAH were added to PVC/ABS blends during their melt blending in the mixer. The weight ratio of PVC to ABS was kept at 70:30. Evaluation of compatibilization was accomplished via tensile and notched Izod impact tests, scanning electron microscopy (SEM), and rheological studies. According to the SEM micrographs, better dispersion of the rubber phase and its finer size in properly compatibilized blends were indications of better compatibility. Besides, in the presence of a proper amount [5 parts per hundred parts of PVC (php)] of ABS‐g‐MAH, PVC/ABS blends showed significantly higher impact strengths than uncompatibilized blends. This result, in turn, would be an indication of better compatibility. In the presence of 5 php of compatibilizer, the higher complex viscosity and storage modulus, as well as a lower loss modulus and loss factor in the range of frequency studied, indicated stronger interfacial adhesion as a result of interaction between maleic anhydride and the PVC‐SAN matrix. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Experimental investigation of the governing parameters in the electrospinning of poly(3‐hydroxybutyrate) scaffolds: Structural characteristics of the pores

We sought to determine the impact of electrospinning parameters on a trustworthy criterion that could evidently improve the maximum applicability of fibrous scaffolds for tissue regeneration. We used an image analysis technique to elucidate the web permeability index (WPI) by modeling the formation of electrospun scaffolds. Poly(3‐hydroxybutyrate) (P3HB) scaffolds were fabricated according to predetermined conditions of levels in a Taguchi orthogonal design. The material parameters were the polymer concentration, conductivity, and volatility of the solution. The processing parameters were the applied voltage and nozzle‐to‐collector distance. With a law to monitor the WPI values when the polymer concentration or the applied voltage was increased, the pore interconnectivity was decreased. The quality of the jet instability altered the pore numbers, areas, and other structural characteristics, all of which determined the scaffold porosity and aperture interconnectivity. An initial drastic increase was observed in the WPI values because of the chain entanglement phenomenon above a 6 wt % P3HB content. Although the solution mixture significantly (p < 0.05) changed the scaffold architectural characteristics as a function of the solution viscosity and surface tension, it had a minor impact on the WPI values. The solution mixture gained the third place of significance, and the distance was approved as the least important factor. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Hybrid organic/inorganic dendritic triblock copolymers: Synthesis,nanostructure characterization,and micellar behavior

A new class of amphiphilic dendritic ABA triblock copolymers, which is based on organic linear polyethylene oxide (PEO) and inorganic dendritic carbosiloxane (CSO) was synthesized. The strategy used in synthesizing these materials is based on divergent method using hydrosilylation‐alcoholysis cycles. The reaction conditions and structural features of dendrimers were analyzed by different physicochemical techniques such as: GPC, NMR, UV spectroscopy, DSC, and viscometry. The generational limit of dendrimer after the first generation, OSC‐D‐PEO‐D‐CSO, forced us to employ HSiCl₂CH₃ as branching reagent. Also further hydrosilylation of the third generation yielded an irregular structure species. Self‐assembling and morphological studies of first, OSC‐D‐PEO‐D‐CSO, and second, OSC‐D‐PEO‐D‐CSO, generations in aqueous medium were monitored by using fluorescence, TEM and DLS techniques. However, the dendritic block copolymer with third generation, OSC‐D‐PEO‐D‐CSO, could not be dispersed in aqueous phase. The diameters of denderitic micelles had a narrow distribution in the ranges of 69 and 88 nm, respectively. Although the micelles were stable even in first generation, partition equilibrium constants of pyrene and critical micelle concentration in both of dendritic micelles imply that the micellar behaviors of the supramolecules strongly depend on the hydrophobic block's size in which increasing generation effectively promoted the micelle formation. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Studies on self cured zinc-containing Pongamia glabra oil based polyesteramide

Efforts have been made for the development of high performance protective coating materials from non drying oil such as Pongamia glabra oil and their commercialization. Zn-containing self cured Pongamia glabra oil based polyesteramide [Zn-APGPEA] resin was synthesized in situ by the reaction of Pongamia glabra fatty amide diol [HEPGA], poly(styrene-co-maleic anhydride) [SMA] and zinc acetate (different ratios) at 100 ± 5 °C in the presence of an acid catalyst. The physico-chemical characterizations of the resin were carried out by standard laboratory methods. The structural elucidation of the prepared resin was carried out by FTIR, ¹H NMR and ¹³C NMR spectral techniques. The thermal behavior was studied by TGA technique. Antibacterial activity was measured by agar diffusion method against Escherichia coli and Staphylococcus aureus. The effect of the loading of zinc on properties of Zn-APGPEA film was also investigated. The properties of Zn-APGPEA compared with reported self cured Pongamia glabra polyesteramide [APGPEA]. Physico-mechanical and chemical/corrosion resistance test of Zn-APGPEA coatings showed that the presence of zinc metal in APGPEA considerably enhances the overall film performance and also improves antibacterial activity. Therefore, Zn-APGPEA can be used as an anti-corrosive and antibacterial coatings material which may substitute polymers obtained from petroleum.     

Glassy carbon electrodes modified with a film of nanodiamond-graphite/chitosan: Application to the highly sensitive electrochemical determination of Azathioprine

A novel modified glassy carbon electrode with a film of nanodiamond-graphite/chitosan is constructed and used for the sensitive voltammetric determination of azathioprine (Aza). The surface morphology and thickness of the film modifier are characterized using atomic force microscopy. The electrochemical response characteristics of the electrode toward Aza are investigated by means of cyclic voltammetry. The modified electrode showed an efficient catalytic role for the electrochemical reduction of Aza, leading to a remarkable decrease in reduction overpotential and enhancement of the kinetics of the electrode reaction with a significant increase of peak current. The effects of experimental variables, such as the deposited amount of modifier suspension, the pH of the supporting electrolyte, the accumulation potential and time were investigated. Under optimal conditions, the modified electrode showed a wide linear response to the concentration of Aza in the range of 0.2-100 μM with a detection limit of 65 nM. The prepared modified electrode showed several advantages: simple preparation method, high stability and uniformity in the composite film, high sensitivity, excellent catalytic activity in physiological conditions and good reproducibility. The modified electrode can be successfully applied to the accurate determination of trace amounts of Aza in pharmaceutical and clinical preparations.