Effects of seawater on AAR expansion of concrete

Recently, AAR was identified in submerged piles of some bridges in tidal waters. Microstructural examination detected chloroaluminate salts in some cracks. To clarify whether seawater had influenced the deterioration an experimental program was planned to examine the effects of sodium chloride on AAR under various curing conditions.Concrete prisms containing either of highly-reactive, slowly-reactive or nonreactive aggregate, and either low or high alkali contents, were stored in saltwater (representing seawater) or at 100% RH, at temperatures of 38, 60 and 80 °C, for expansion measurement over 600 days, after which the temperature for those stored in saltwater was lowered to 23 °C, to check its effect on further expansion, which could be attributed to precipitation of ettringite and/or Ca-chloroaluminate.The results indicate that the type of aggregate and concrete alkali content had the greatest effect on AAR expansion. Exposure to saltwater did not have any significant effect on the AAR expansion.     

Dynamic TDD Fixed Cellular Systems Using Smart and Sectored Antennas

There are many benefits in using time division duplex (TDD) instead of frequency division duplex (FDD) schemes in fixed wireless cellular systems. For example, channel reciprocity for a single carrier frequency used on both uplinks and downlinks will allow easy access to channel state information, reduced complexity of RF design, much higher flexibility in handling dynamic traffic, simpler frequency plan, etc. However, there exists a serious limiting factor in using dynamic TDD (D-TDD) in cellular systems. This is due to a steady interference on an uplink in any cell caused by downlink transmissions in other cells. Simulation results show in D-TDD cellular systems, performance is unacceptable, when an omnidirectional antenna is used at base stations. Simulation results also suggest great potential for smart antennas in achieving substantial performance improvement in fixed D-TDD bandwidth-on-demand wireless systems.     

Threshold value for the number of cells in group technology

The similarity coefficient methods are more flexible in incorporating manufacturing data into the machine cells formation process in group technology. When threshold value is applied it is impossible to consider the restriction of number of cells or pact family. This paper discusses how a function is defined on Similarity coefficients and generates a threshold value which specifies an upper band on number of cells.     

Direct hardware solution to quadratic equation Z2⊕Z⊕β=0 in Galois fields based on normalbasis representation

Normal basis representation is considered to represent the elements of Galois fields. The quadratic equation, Z²⊕Z⊕β=0, is solved directly and a new, simple, regular and expandable hardware structure is introduced to solve this equation. The main advantage of this structure over the structures in non-normal basis representations is its independence from generating polynomial of the field     

Colposcopic evaluation of patients with abnormal cytologic smears during pregnancy

A new tube test for pregnancy, having a sensitivity of 0.5 I.U. of human chorionic gonadotropin per milliliter, was evaluated, along with two other commercially available kits, in a hospital patient population. Of 586 patients in the study, 302 were in nonobstetric services and many were acutely ill. Approximately one fourth of the women were age 40 or older. The medical records of 66% of the patients were retrieved to obtain information on the drugs administered prior to pregnancy testing. A small number of problems did occur in the pregnancy test procedures. Inconclusive results were recorded for both pregnant and nonpregnant patients and could not be correlated with disease states and/or medications. The importance of a reagent control for tube test procedures is discussed.     

Quantum Entanglement and Cryptography for Automation and Control of Dynamic Systems

This paper addresses the application of quantum entanglement and cryptography for automation and control of dynamic systems.A dynamic system is a system where t...     

MXene Composite and Coaxial Fibers with High Stretchability and Conductivity for Wearable Strain Sensing Textiles

The integration of nanomaterials with high conductivity into stretchable polymer fibers can achieve novel functionalities such as sensing physical deformations. With a metallic conductivity that exceeds other solution‐processed nanomaterials, 2D titanium carbide MXene is an attractive material to produce conducting and stretchable fibers. Here, a scalable wet‐spinning technique is used to produce Ti₃C₂T_x MXene/polyurethane (PU) composite fibers that show both conductivity and high stretchability. The conductivity at a very low percolation threshold of ≈1 wt% is demonstrated, which is lower than the previously reported values for MXene‐based polymer composites. When used as a strain sensor, the MXene/PU composite fibers show a high gauge factor of ≈12900 (≈238 at 50% strain) and a large sensing strain of ≈152%. The cyclic strain sensing performance is further improved by producing fibers with MXene/PU sheath and pure PU core using a coaxial wet‐spinning process. Using a commercial‐scale knitting machine, MXene/PU fibers are knitted into a one‐piece elbow sleeve, which can track various movements of the wearer's elbow. This study establishes fundamental insights into the behavior of MXene in elastomeric composites and presents strategies to achieve MXene‐based fibers and textiles with strain sensing properties suitable for applications in health, sports, and entertainment.     

Highly Conductive Ti3C2Tx MXene Hybrid Fibers for Flexible and Elastic Fiber‐Shaped Supercapacitors

Fiber‐shaped supercapacitors (FSCs) are promising energy storage solutions for powering miniaturized or wearable electronics. However, the scalable fabrication of fiber electrodes with high electrical conductivity and excellent energy storage performance for use in FSCs remains a challenge. Here, an easily scalable one‐step wet‐spinning approach is reported to fabricate highly conductive fibers using hybrid formulations of Ti₃C₂T_x MXene nanosheets and poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate. This approach produces fibers with a record conductivity of ≈1489 S cm^?1, which is about five times higher than other reported Ti₃C₂T_x MXene‐based fibers (up to ≈290 S cm^?1). The hybrid fiber at ≈70 wt% MXene shows a high volumetric capacitance (≈614.5 F cm^?3 at 5 mV s^?1) and an excellent rate performance (≈375.2 F cm^?3 at 1000 mV s^?1). When assembled into a free‐standing FSC, the energy and power densities of the device reach ≈7.13 Wh cm^?3 and ≈8249 mW cm^?3, respectively. The excellent strength and flexibility of the hybrid fibers allow them to be wrapped on a silicone elastomer fiber to achieve an elastic FSC with 96% capacitance retention when cyclically stretched to 100% strain. This work demonstrates the potential of MXene‐based fiber electrodes and their scalable production for fiber‐based energy storage applications.     

An investigation into design and manufacturing of mechanical conveyors systems for food processing

This paper presents the results of a research investigation undertaken to develop methodologies and techniques that will reduce the cost and time of the design, manufacturing and assembly of mechanical conveyor systems used in the food and beverage industry. The improved methodology for design and production of conveyor components is based on the minimisation of materials, parts and costs, using the rules of design for manufacture and design for assembly. Results obtained on a test conveyor system verify the benefits of using the improved techniques. The overall material cost was reduced by 19% and the overall assembly cost was reduced by 20% compared to conventional methods.     

Systematics study through scanning electron microscopy; a tool for the authentication of herbal drug Mentha suaveolens Ehrh

In all over the world, herbal drugs are usually adulterated with similar species or varieties due to incorrect identification. Most of herbal products devoid purity and quality, therefore an attempt was carried out to identify plant species and authenticate its herbal drug products from Mentha suaveolens. Microscopy tools provide an excellent platform to identify plants at species level. In this study, microscopic and pharmacokinetic parameters of M. suaveolens were observed. Plant species were collected from high diverse areas of Northern Pakistan. Macro and micro‐morphology including palynology and anatomical features were analyzed to study M. suaveolens. Species characteristics were studied, while implementing microscopic techniques for the delimitation and identification of the species. Traditionally Mentha species are used to cure several diseases that is, digestive disorders, respiratory disorders. Micromorphology (stem, leaves, flowers structure, length etc.), palynology (shape, size of pollen etc.), and anatomical characters (types of stomata, epidermal cell shape, and trichomes) were studied. Micromorphology and anatomical characters were of great interest and significance to discuss the taxonomy of the species. Taxonomic characters were studied to characterize and authenticate the species. The aim of the present study is to observe in detail the taxonomic identification of the species in term of morphology, palynology, and foliar epidermal anatomy for the correct identification along with their medicinal uses in the area.