新型聚丙烯接枝物的制备及应用

为制备强韧的共混材料,利用熔融接枝法研制了含有两种接技单体的新型聚丙烯接枝物,讨论了第二单体在接枝过程中的作用,并将其应用于尼龙6/聚丙烯(PA6/PP)共混体系,获得了使分散相粒径更细小、界面更模糊的增容效果。     

吊车断裂弹簧钢板的焊接修复

吊车上的板弹簧是一个很重要的零件,它在反复应力下工作,承受较大的冲击负荷和振动,要求其应具有较高的疲劳强度、抗拉强度等性能。由于板弹簧为碳含量较高的合金钢,焊接性差,修复断裂的板弹簧较困难。某公司的一台日本进口TL-252型25t吊车,在使用二年内先后发现五块弹簧钢板断裂,给现场施工带来了不便和一定的经济损失。经制定严格的工艺,对断裂板弹簧成功地进行了焊接修复,修复后使用效果很好。1板簧材料及可焊性分析断裂的弹簧钢板为日本钢号SUP6,相当于我国的60Si2Mn弹簧钢,其化学成份见表1。表1SUP6钢的化学成份(%)C Si Mn S P …     

庙宇平坝防洪治理方案研究

庙宇平坝地处大溪河右岸支流庙宇沟上游山间盆地内,仅靠一条人工开凿的排洪洞和天然消坑排泄洪水,过流能力不足致使每年都遭受洪涝灾害。根据庙宇平坝地形条件及防洪现状,复核现有排洪设施泄流能力,分析存在的问题,结合庙宇平坝地形条件及区内实际情况,采取整个消水洞的扩建及进口前100 m的河道支护,从而提高泄洪能力,降低庙宇平坝水位,有效减少洪水淹没历时及淹没深度。     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

广西田阳县生态扶贫产业核心示范区一期工程补水泵站设计

结合广西田阳县生态扶贫产业核心示范区一期工程补水泵站实际情况,通过方案比选,采用河流入江口东岸布置方案,并对泵站进行了设计介绍,总结技术特点,为类似工程提供参考。     

基于SOAP的企业异构信息系统集成

阐述了SOAP通信协议的构成和实现机制以及与相似协议的比较。基于它的跨平台的能力,将其运用于企业的分布式环境中,实现了异构信息系统间的互操作和跨部门的数据处理,提高企业数据处理的效能,同时为企业异构信息系统集成提供了新的方法。     

A noisy-smoothing relevance feedback method for content-based medical image retrieval

In this paper, we address a new problem of noisy images which present in the procedure of relevance feedback for medical image retrieval. We concentrate on the noisy images, caused by the users mislabeling some irrelevant images as relevant ones, and a noisy-smoothing relevance feedback (NS-RF) method is proposed. In NS-RF, a two-step strategy is proposed to handle the noisy images. In step 1, a noisy elimination algorithm is adopted to identify and eliminate the noisy images. In step 2, to further alleviate the influence of noisy images, a fuzzy membership function is employed to estimate the relevance probabilities of retained relevant images. After noisy handling, the fuzzy support vector machine, which can take into account different relevant images with different relevance probabilities, is adopted to re-rank the images. The experimental results on the IRMA medical image collection demonstrate that the proposed method can deal with the noisy images effectively.     

聚萘二甲酸乙二醇酯(PEN)的研究及发展

综述了聚萘二甲酸乙二醇酯(PEN)的发展历史,合成工艺,应用领域及其与PET的性能比较。     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.