Evaluation of the effect of heat input in superduplex stainless steel deposition by the plasma powder process*

Plasma powder surfacing is one of the latest processes for application of coatings, with control of dilution as its main feature. Surfacing with superduplex stainless steels is an interesting option for the construction and repair of equipment for applications in a highly corrosive environment, allowing the desired characteristics to be achieved: corrosion resistance and good mechanical properties. The aim of this work is to assess the ferrite content in the weld metal and the mechanical characteristics via microhardness profiles in surfacing of C-Mn steel pipes with deposition of UNS S32760 by plasma powder surfacing. Welding operations were carried out on pipes with deposition of SDSS, employing three welding heat input levels, varying the welding speed or the welding current. Then the geometry was analysed, the ferrite content in the weld metal was quantified and the microhardness profile was recorded. Variation in welding heat input caused changes in weld bead geometry, with variation in the welding current producing the most significant changes. Increase in heat input caused decrease in ferrite content of the weld metal. Regarding microhardness, only the condition with a higher level of welding current gave sufficiently high levels of microhardness in the weld metal.     

Determination of satellite nadir and azimuth angles for a tilting sensor

The procedure for the determination of satellite nadir and azimuth angles has beenverifiedusing the Coastal Zone Color Scanner (CZCS) geolocation algorithm formulated by Wilson and co-workers in 1981. The error involved in the determination of satellite nadir and azimuth angles for positive and negative tilt of the mirror using the above method is discussed. A simple method to determine nadir and azimuth angles for a tilting mirror is proposed. The nadir and azimuth angles after roll, pitch and yaw of the satellite are presented.     

A study of external mass transfer effect on biodegradation of phenol using low‐density polyethylene immobilized Bacillus flexus GS1 IIT (BHU) in a packed bed bioreactor

The impact of external mass transport on the biodegradation rate of phenol in a packed bed bioreactor (PBBR) was studied. A potential bacterial species, Bacillus flexus GS1 IIT (BHU), was isolated from the petroleum‐contaminated soil. Low‐density polyethylene (LDPE) immobilized with the B. flexus GS1 IIT (BHU) was used as packing material in the PBBR. The PBBR was operated by varying the inlet feed flow rate from 4 to 10 mL/min, and the corresponding degradation rate coefficients were found to be in the range of 0.119–0.157 L/g h. In addition, the highest removal rate of phenol was obtained to be 1.305 mg/g h at an inlet feed rate of 10 mL/min. The external mass transfer was studied using the model . A new empirical correlation for the biodegradation of phenol in the PBBR was developed after the evaluation at various values of K and n.     

Femtosecond-laser selective printing of graphene oxide and PPV on polymeric microstructures

Direct laser writing techniques are suitable for the high precision-patterning of 2D and 3D micro/nanostructures, featuring a variety of geometries and materials. Here, we demonstrated the use of laser-induced forward transfer with fs-pulses (fs-LIFT) to selectively transfer graphene oxide and poly(p-phenylene vinylene) patterns onto polymeric microstructures, fabricated by two-photon polymerization. The influence of different fs-LIFT experimental parameters on the width and height of the printed patterns was investigated. Upon optimum fs-LIFT parameters, we achieved homogeneous printed areas of both materials onto specific regions of the microstructures. Raman spectroscopy confirmed that fs-LIFT does not change the donor material upon transfer. Overall, this work demonstrates a promising strategy with precise printing capabilities, thus opening new opportunities for the development of photonic and optoelectronic devices.

     

Novel anhydrous composite membranes based on sulfonated poly (ether ketone) and aprotic ionic liquids for high temperature polymer electrolyte membranes for fuel cell applications

Novel composite membranes were prepared using imidazolium type aprotic ionic liquids and sulfonated poly (ether ketone) (SPEK) as polymer matrix by solution casting process. All the prepared membranes were characterized for their thermal stability, mechanical properties, ion exchange capacity, proton conductivity and leaching out of ionic liquids in presence of water. Ionic liquid based membranes were more flexible than neat SPEK membrane due to the plasticization effect of ionic liquids. The interactions and compatibility occurring among components were investigated by vibration spectroscopy (FTIR ATR) and scanning electron microscopy respectively. The thermal stability of composite membranes was higher than unmodified membranes. The ion conductivity of composite membranes under anhydrous conditions was found to be dependent on temperature, type and concentration of ionic liquid in SPEK matrix. Ion conductivities of composite membranes under anhydrous condition were found to be up to two orders (∼100 times) higher than neat SPEK membrane and it was found to be ∼5 mS/cm at 140 °C for SPEK/OTf-70. These composite membranes can be successfully operated at temperatures ranging from 40 °C to 140 °C under anhydrous conditions.     

Groundwater potential modelling in a soft rock area using a GIS

A Geographical Information System (GIS) integration tool is proposed to demarcate the groundwater potential zone in a soft rock area using seven hydrogeologic themes: lithology, geomorphology, soil, net recharge, drainage density, slope and surface water bodies. Except for net recharge and slope, the other five themes are derived from remote sensing data. IRS-1B LISS-II data was used for a 631 km² area in Midnapur District, West Bengal, India. While slope was calculated using topographic sheets, net recharge was obtained from annual water table fluctuation data. Each feature of all the thematic maps was evaluated according to its relative importance in the prediction of groundwater potential. The evolved GIS-based model of the study area was found to be in strong agreement with available borehole and pumping test data.     

Optimization of Lithium Extraction from Lepidolite by Roasting Using Sodium and Calcium Sulfates

The lithium extraction from a lepidolite concentrate using roasting, followed by water leaching, was studied. Several alternative additives were initially tested. The use of sodium and calcium sulfates as additives was evaluated in more detail. The influence of some process variables, namely the roasting time, roasting temperature and the additive/concentrate mass ratio, was studied applying a design of experiments. The lithium extraction was modelled and the fitted and validated model was used to optimize the process response. The increase in the additive/concentrate mass ratio, roasting time and temperature seems to result in solid state reactions and transformations that lead to phase, morphological and particle size distribution modifications, which were assessed by XRPD, SEM, and particle size analyses. In this process, lithium sodium sulfate formation constitutes a crucial step enabling the Li water leaching. High lithium extractions were estimated for several combinations of factors. At 850°C, lithium extractions over 90% are obtained when the roasting time is above 1.90 hour and the additive/concentrate mass ratios are over 0.77. An increase in the temperature to 875°C also leads to lithium extractions over 90% for a roasting time of 1 hour and an additive/concentrate mass ratio of 0.60.     

Brick and mortar treatment by cream emulsion for improved water repellence and thermal insulation

A novel polymer cream was applied to brick and mortar in an attempt to reduce water absorption and to improve thermal insulation for household heating energy saving. Tests were carried out on surface energy, water contact angle, thermal conductivity and sorptivity of brick and mortar with and without cream treatment. A model house was built and a heating and monitoring system was developed to quantitatively evaluate the heating energy consumption in different conditions before and after cream treatment. It was found out that cream treatment can successfully impart good water repellence and enhanced the thermal insulation of the brick and mortar. The results from contact angle and surface energy measurements showed that the materials became highly hydrophobic. Experimental results from the model house showed approximately 9% heating energy consumption reduction in dry conditions and approximately 50% in wet conditions. In addition, the internal humidity typically was reduced to almost 1/3 of that of the control. It has been demonstrated that the novel cream treatment on masonry buildings can help reduce damp problems and save household heating energy consumption which can make a significant contribution to addressing social, environmental, ecological and economic problems resulting from climate change and global warming.     

An evaluation of fuelwood properties of some Aravally mountain tree and shrub species of Western India

The study analyses the fuelwood characteristics of 26 trees including shrub species from the dry deciduous forest in Aravally region, Rajasthan, Western India was carried out to explore trees with potential for fuelwood production. Fuelwood value index (FVI) based on the properties of calorific value, wood density and ash. Calorific value was ranged between 18.54 ± 0.04 and 27.44 ± 0.09 KJ g⁻¹ in Jatropha curcus and Wrightia tinctoria respectively. Wood density varied from 0.538 ± 0.01 to 0.966 ± 0.07 g/cm³ in J. curcus and Acacia nilotica. Same way ash and moisture content was highest in J. curcus (3.38 ± 0.19%) and Sterculia urens (70.28 ± 7.52%) and lowest in Miliusa tomentosa (0.85 ± 0.06%) and Azadirachta indica (30.7 ± 10.02%) respectively. On the basis, of the 26 species analyzed, M. tomentosa has the highest FVI, followed by Lannea coromandelica, Acacia leucophloea, Madhuca indica, A. nilotica, W. tinctoria, Butea monosperma, Zizyphus nummularia, S. urens, Boswellia serrata, A. indica, Grewia tenax, Syzygium cuminii, Tectona grandis and Dalbergia sissoo were shown to have promising fuelwood production.