Effects of SEBS-g-MA copolymer on non-isothermal crystallization kinetics of polypropylene

The non-isothermal crystallization kinetics of pure PP and PP/SEBS-g-MA blends up to volume fraction, Φ _d (0–0.50) was studied by differential scanning calorimetry at four different cooling rates. Crystallization parameters were analyzed by Ozawa and Liu models. The Ozawa model fits in the PP/SEBS-g-MA blends and indicates the effect of SEBS-g-MA copolymer on the crystallization process of polypropylene. Augis–Bennet model has been used to calculate activation energy, ?E, during non-isothermal crystallization process. The value of ?E decreased with SEBS-g-MA due to flexibility of SEBS-g-MA by which movements of chains of PP become easier.     

Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates

Hemp fibre‐reinforced polycaprolactone (HFRP) composite has inherent good mechanical properties and benefits which include remarkably high specific strength and modulus, low density, and renewability. No doubt, these properties have attracted wider applications of HFRP composite in engineering applications. This paper presents an investigation on the influence of drilling parameters and fibre aspect ratios, AR (0, 19, 26, 30, and 38) on delamination damage factor and surface roughness of HFRP composite laminates utilising high speed steel twist drills under dry machining condition. Taguchi's technique was used in the design of experiment. The results obtained show that increase in cutting speed reduces delamination factor and surface roughness of drilled holes, whereas increase in feed rate causes increase in both delamination factor and surface roughness. Feed rate and cutting speed had the greatest influence on delamination and surface roughness respectively when compared with aspect ratio, while an increase in fibre aspect ratios leads to a significant increase in both delamination factor and surface roughness. The optimum results occurred at cutting speed and feed rate (drilling parameters) of 20 mm/min and 0.10 mm/rev, respectively, when drilling sample of AR 19. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42879.     

Erosion behavior of SiC–WC composites

Dense silicon carbide (SiC) ceramics were prepared with 0, 10, 30 or 50 wt% WC particles by hot pressing powder mixtures of SiC, WC and oxide additives at 1800 °C for 1 h under a pressure of 40 MPa in an Ar atmosphere. Effects of alumina or SiC erodent particles and the WC content on the erosion performance of sintered SiC–WC composites were assessed. Microstructures of the sintered composites consisted of WC particles distributed in the equi-axed grain structure of SiC. Fracture surfaces showed a mixed mode of fracture, with a large extent of transgranular fracture observed in SiC ceramics prepared with 30 wt% WC. Crack bridging by WC enhanced toughening of the SiC ceramics. A maximum fracture toughness of 6.7 MPa*m^1/2 was observed for the SiC ceramics with 50 wt% WC, whereas a high hardness of 26 GPa was obtained for the SiC ceramics with 30 wt% WC. When eroded at normal incidence, two orders of magnitude less erosion occurred when SiC–WC composites were eroded by alumina particles than that eroded by SiC particles. The erosion rate of the composites increased with increasing angle of SiC particle impingement from 30° to 90°, and decreased with WC reinforcement up to 30 wt%. A minimum erosion wear rate of 6.6 mm³/kg was obtained for SiC–30 wt% WC composites. Effects of mechanical properties and microstructure on erosion of the sintered SiC–WC composites are discussed, and the dominant wear mechanisms are also elucidated.     

Impact behavior of unidirectional polyethylene–glass fibers: PMMA hybrid composite laminates

Unidirectional (UD) hybrid laminates based on glass fibers (GF) and high performance polyethylene fibers (PEF) were prepared with partially polymerized methyl methacrylate (MMA) at room temperature followed by heating at 55°C (well below the softening point of PEF) for 2 h. Izod impact strength of the composites was then measured. An interesting observation of the study was the change in impact strength that was largely dependent on the position of GF and PEF ply/plies present within the hybrid laminates. When the ply/plies of PEF were at the impacted surface, the impact strength showed a higher value than that of the case when GF ply/plies were at the impacted surface of the hybrid laminates. © 1996 John Wiley & Sons, Inc.     

Formulation of a Biodegradable Detergent for Cleaning Oily Residues Generated during Industrial Processes

The use of toxic petroleum-based heavy oils is common in industrial processes. The cleaning of machines, equipment, and other surface covered in these oils is achieved with expensive products that are often also toxic and harmful to both the health of workers and the environment. The present paper proposes the development of a sustainable biodetergent made from plant-based materials. Tests were performed to determine the properties of the biodetergent in terms of its surfactant and emulsifying capacities, stability, toxicity, and the removal of heavy oil from glass plates and metallic surfaces. The formulation was composed of a natural solvent (cottonseed oil), a plant-based surfactant agent (saponin), and two natural stabilizers (carboxymethylcellulose and glycerine). The formulation was stable, nontoxic, and highly efficient, removing 100% of the heavy oil from glass and metallic surfaces. This solution developed in this study could be used in diverse industries with the need to clean machines and parts encrusted with oil and grease as well as the cleaning of floors covered with petroleum-based residues. A preliminary analysis of the economic feasibility of using the detergent was carried out at a Brazilian power plant. Besides the reduction in environmental impact due to the use of a nontoxic, biodegradable product as well as the reduction in health risks to workers associated with toxic cleaning products, this new product can have a considerable impact on the market as an environmentally friendly solution.     

Synthesis of Self-Healing Bio-Based Tannic Acid-Based Methacrylates By Thermoreversible Diels–Alder Reaction

This investigation reports the effective use of the Diels–Alder (DA) click reaction in the preparation of self-healing bio-based dendritic methacrylates having reactive furfuryl functionality. Bio-based methacrylates were synthesized by modifying tannic acid with glycidyl methacrylate and furfuryl functionality was introduced by atom transfer radical polymerization with varied amount of furfuryl methacrylate monomer. The thermoreversible network was successfully achieved by DA and retro-DA reaction between the furfuryl groups and a bifunctional maleimide crosslinker, bismaleimide. This process was studied by nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and solvent exposure tests. Differential scanning calorimetry analysis was used to determine the endothermic retro-DA reaction in the DA adduct. The self-healing property of the above crosslinked material was demonstrated by monitoring the repair of a scratch in the polymer film upon heating and cooling. This was analyzed by scanning electron microscopy. POLYM. ENG. SCI., 60:140–150, 2020. © 2019 Society of Plastics Engineers     

Cell-Based Chemical Safety Assessment and Therapeutic Discovery Using Array-Based Sensors

Synthetic chemicals are widely used in food, agriculture, and medicine, making chemical safety assessments necessary for environmental exposure. In addition, the rapid determination of chemical drug efficacy and safety is a key step in therapeutic discoveries. Cell-based screening methods are non-invasive as compared with animal studies. Cellular phenotypic changes can also provide more sensitive indicators of chemical effects than conventional cell viability. Array-based cell sensors can be engineered to maximize sensitivity to changes in cell phenotypes, lowering the threshold for detecting cellular responses under external stimuli. Overall, array-based sensing can provide a robust strategy for both cell-based chemical risk assessments and therapeutics discovery.     

Thermovinification of grapes from the Cabernet Sauvignon and Pinot Noir varieties using immobilized yeasts

This study examined the thermovinification technique using yeasts immobilized on calcium alginate for microvinification of the Cabernet Sauvignon and Pinot Noir grape varieties grown in Diamantina, Minas Gerais, Brazil. The wines obtained by thermovinification were characterized by their chemical and sensory aspects. The varietal wines from Cabernet Sauvignon and Pinot Noir had an alcohol content of 9.3 and 10.9 % (v/v), respectively. The total acidity, volatile acidity and the alcohol/reduced dry extract ratio were consistent with the Brazilian standards established for identity and quality of wines. There was a significant reduction in the levels of anthocyanins, flavonoids and total phenolic compounds after aging in the bottle. The sensory evaluation presented an acceptability exceeding 60 % for both wines.     

CRIM’s content-based audio copy detection system for TRECVID 2009

We report results on audio copy detection for TRECVID 2009 copy detection task. This task involves searching for transformed audio queries in over 385?h of test audio. The queries were transformed in seven different ways, three of them involved mixing unrelated speech to the original query, making it a much more difficult task. We give results with two different audio fingerprints and show that mapping each test frame to the nearest query frame (nearest-neighbor fingerprint) results in robust audio copy detection. The most difficult task in TRECVID 2009 was to detect audio copies using predetermined thresholds computed from 2008 data. We show that the nearest-neighbor fingerprints were robust to even this task and gave actual minimal normalized detection cost rate (NDCR) of around 0.06 for all the transformations. These results are close to those obtained by using the optimal threshold for each transform. This result shows the robustness of the nearest-neighbor fingerprints. These nearest-neighbor fingerprints can be efficiently computed on a graphics processing unit, leading to a very fast search.