Process performance and change in sludge characteristics during anaerobic digestion of sewage sludge with ozonation.

A new process configuration combining anaerobic digestion with ozonation, and operated at long SRT, was studied with the objective of on-site reduction in sludge quantity and improving biogas recovery. The process performance with respect to solid reduction efficiency and other important process parameters like accumulation of inorganic solids, changes in sludge viscosity and dewatering characteristics were evaluated from the data of long term pilot scale continuous experiments conducted using a mixture of primary and secondary municipal sewage sludge. Due to sludge ozonation and long SRT, high VSS degradation efficiency of approximately 80% was achieved at a reactor solid concentration of 6.5%. A high fraction of inorganic solid (>50%) consisting mainly of acid insoluble and iron compounds was found to accumulate in the reactor. The high inorganic content accumulated in the digested sludge did not, however, contribute to the observed increase in sludge viscosity at high solid concentration. The sludge viscosity was largely found to depend on the organic solid concentration rather than the total solid content. Moreover, higher inorganic content in the digested sludge resulted in better sludge dewaterability. For a quick assessment of the economic feasibility of the new process, an economic index based on the unit cost of digested sludge disposal to unit electric cost is proposed.     

TAT (time-axis transform) bandwidth compression system of picturesignals

A bandwidth compression system for picture signals called the time-axis transform (TAT) system is introduced. It can be applied to various systems for transmission and recording of picture signals, such as the satellite broadcast system of high-definition television. The TAT compresses the bandwidth by reducing the number of transmitted pixels. The transmitted pixels consist of two kinds: basic pixels and additional pixels. The location of the former is fixed and that of the latter varies from picture to picture to minimize the interpolation error in the reconstructed picture. Thus, the TAT is a hybrid of fixed sampling and variable sampling systems. It compresses the bandwidth of the picture signal to one half or less, keeping high picture quality for both still and moving pictures. The feasibility of the TAT is demonstrated by an experimental system     

Cloning and characterization of a mouse homologue (mNthl1) of Escherichia coli endonuclease III

The association patterns between maternal anthropometric characteristics (stature, prepregnancy weight, prepregnancy body mass index, pregnancy weight gain) and newborn size (birth weight, length, head circumference) were tested with 10,240 single births taking place between 1985 and 1995 in Vienna, Austria, and 3,452 single births taking place between 1989 and 1995 in Westerstede-Ammerland (Friesland), northern Germany. Maternal size and newborn size differed highly significantly (p < 0.001) between the two genetically and socioeconomically different population groups. Furthermore, the incidence of macrosomia among newborns (birth weight greater than 4000 g) was extraordinarily high (17.9%) in the Frisian group from northern Germany. In both populations taller and heavier women with a higher weight gain during pregnancy gave birth to heavier offspring. Nevertheless, the pregnancy weight gain, which indicates environmental conditions of the mother, had only a minor impact on newborn size compared with stature and prepregnancy weight, which reflect the maternal genetic potential to a higher degree.     

Amorphous-silicon FET array for LCD panel

A small 20 × 20 dot matrix array of a FET has been fabricated on a glass substrate using a-Si films as the semiconductor and silicon nitride deposited from a N2-SiH4 mixture as the gate insulator. Good operation is obtained for both TN-mode and GH-mode in transparent-type LCDs. The improved fabrication process and structure are reported.     

Factors affecting callus distraction in limb lengthening

Factors affecting the process of callus distraction in limb lengthening include the type of osteotomy, timing and rate of distraction, and stability of fixation. Thirty-two rabbits were studied to evaluate the reliability of transverse osteotomy and delayed distraction and to examine the appropriate rates of distraction. Rabbit tibiae were osteotomized subperiosteally and were subjected to slow distraction using a rigid monolateral external fixator. There was a ten-day waiting period before distraction. The animals were divided into three groups according to the rate of distraction (0.35 mm/12 hours, 0.7 mm/12 hours, 1.4 mm/12 hours). The process of callus formation was monitored by soft x-ray. The reliability of delayed distraction after transverse osteotomy was demonstrated by microangiographic study. Even though intramedullar vessels were interrupted by osteotomy at surgery, blood circulation recovered during the waiting period before distraction. Bone lengthening was successful when distraction was carried out at rates of 0.35 mm/12 hours or 0.7 mm/12 hours. The callus filling a distraction gap showed a characteristic zone structure, i.e., one central radiolucent zone and two adjacent sclerotic zones. Microangiographic study demonstrated the continuity of blood vessels under these rates of distraction. Based on the results of these experiments and clinical experiences on 180 bone lengthenings, the authors believe that a waiting period after osteotomy is more practical than achieving immediate distraction after uncertain corticotomy.     

Anaerobic digestion with partial ozonation minimises greenhouse gas emission from sludge treatment and disposal.

A novel anaerobic digestion process combined with partial ozonation on digested sludge was demonstrated for improving sludge digestion and biogas recovery by full-scale testing for 2 years and its performance was compared with a simultaneously operated conventional anaerobic digestion process. The novel process requires two essential modifications, which are ozonation for enhancing the biological degradability of sludge organics and concentrating of solids in the digester through a solid/liquid separation for extension of SRT. These modifications resulted in high VSS degradation efficiency of ca. 88%, as much as 1.3 times of methane production and more than 70% reduction in dewatered sludge cake production. Based on the performance, its energy demands and contribution for minimisation of greenhouse gas emission was evaluated throughout an entire study of sludge treatment and disposal schemes in a municipality for 130,000 p.e. The analysis indicated that the novel process with power generation from biogas would lead to minimal greenhouse gas emission because the extra energy production from the scheme was expected to cover all of the energy demand for the plant operation, and the remarkable reduction in dewatered sludge cake volumes makes it possible to reduce N2O discharge and consumption of fossil fuel in the subsequent sludge incineration processes.     

Real-Time Computer for First-and Second-Order Wiener Kernels

This correspondence describes the design and application of an instrument which computes real-time estimates of first- and second-order Wiener kernels. The instrument performs the appropriate correlations between the measured response and a ternary conversion of the white-noise stimulus. An example application is described for a study of the human electroretinogram.