铁路电力试验车软件的设计与实现

介绍了铁路电力试验车软件的设计思想、框架结构及其总体控制策略 ,并就其中的测试程序、数据库管理系统、串口通讯程序、复杂式样报表生成和系统安装程序的设计策略作了叙述。     

纳米α-FeOOH颗粒的形态和结构

以硫酸法钛白的副产物绿矾为原料，采用滴加法制备纳米铁黄（α－FeOOH）颗粒。研究了反应体系的pH值、反应温度、通氧速率、搅拌速率和添加剂等对铁黄颗粒形态结构的影响，采用XRD、TEM等分析手段对颗粒进行表征。结果表明，调节体系pH值能控制铁黄晶型结构和色相；改变通氧速率、搅拌速率、添加剂种类以及反应温度等可以调节纳米α－FeOOH的大小和分散性。     

金属Be真空出气性能的测试

利用四极质谱计测试了国产金属铍材在 10 0℃～ 6 0 0℃不同温度下的真空出气成分及相对含量 ,实验得出铍的大量出气主要在温度 4 0 0℃～ 5 0 0℃之间 ,其放出气体的主要成分按放气量大小依次为H2 O ,CO2 ,N2 ,CO ,Ar和H2 ,利用限流小孔半定量的计算了铍材的出气量。     

Containerless solidification of highly undercooled mullite melts: Crystal growth behavior and microstructure formation

A mullite (3Al₂O₃·2SiO₂) sample has been levitated and undercooled in an aero-acoustic levitator, so as to investigate the solidification behavior in a containerless condition. Crystal-growth velocities are measured as a function of melt undercoolings, which increase slowly with melt undercoolings up to 380 K and then increase quickly when undercoolings exceed 400 K. In order to elucidate the crystal growth and solidification behavior, the relationship of melt viscosities as a function of melt undercoolings is established on the basis of the fact that molten mullite melts are fragile, from which the atomic diffusivity is calculated via the Einstein-Stokes equation. The interface kinetics is analyzed when considering atomic diffusivities. The crystal-growth velocity vs melt undercooling is calculated based on the classical rate theory. Interestingly, two different microstructures are observed; one exhibits a straight, faceted rod without any branching with melt undercoolings up to 400 K, and the other is a feathery faceted dendrite when undercoolings exceed 400 K. The formation of these morphologies is discussed, taking into account the contributions of constitutional and kinetic undercoolings at different bulk undercoolings.     

Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

铁电存储场效应晶体管I-V特性的物理机制模拟

文章讨论的模型主要描述了铁电存储场效应晶体管（FEMFET）的I-V特性。从理论结果可反映出几何尺寸效应和材料参数对晶体管电特性的影响。传统的阈值电压的概念巳不再适用，由于铁电层反偏偶极子的开关作用，自发极化的增加对存储器的工作状态产生很小的影响。该模型可用于设计和工艺参数的优化，并由直观原型的方法得到了验证。     

Development of the Chinese Scientometric Indicators (CSI)

We describe the Chinese Scientometric Indicators (CSI), an indicator database derived from the Chinese Science Citation Database (CSCD). Its design is supported by the Natural Sciences Foundation of China (NSFC). In this indicator database data of a statistical nature are organized and categorized leading to ranked lists and providing bases for comparisons among Chinese institutions and regions.     

机器人手指尖六维力/力矩传感器的研制

提出一种机器人手指尖六维力／力矩传感器，并对其弹性体结构进行详细论述；分析应变量与测量量的对应关系；采用现代设计手段对弹性体进行模态分析，并介绍了传感器放大处理电路，给出实验结果。     

Si基膜片型气敏传感器微结构单元的热学性能

微结构气敏传感器由于其微型化、低功耗、易阵列化和易批量生产等优点而受到国内外研究者的广泛关注。利用微机电系统（MEMS）加工技术，制备Si基膜片型微结构单元，并分析其热学性能。这种单元工作区温度为-300℃时，加热功率约75mW；并且膜片工作区的热质量很小，温度可以于毫秒量级的时间内，在室温和450℃之间调制。利用这种微结构单元，可以在温度调制方式下，研究气敏薄膜的电学特性和敏感机理。     

Research on reversible effects and mechanism between the energy-absorbing and energy-reflecting states of chameleon-type building coatings

In the present paper, the reversible effects between energy-absorbing and energy-reflecting states of chameleon-type building coatings were studied through demonstration of the layers’ properties using infrared thermal imaging of the layers when exposed to a sunlamp or temperature measurements of the layers during exposure to sunlight at different ambient temperatures. The reversible transforming mechanism between the energy-absorbing and energy-reflecting states of the chameleon-type building coatings was investigated with IR, Raman and ¹H NMR spectroscopy. The infrared thermal image results showed that when reversibly thermochromic pigments were added to normal white building coatings, the chameleon-type building coatings could absorb energy from the sunlamp below a switching temperature of about 18°C. Absorption of energy from the sunlamp stopped automatically above the switching temperature. The results from exposure to solar radiation showed that when the temperature was below the switching temperature, the chameleon-type building coating could absorb almost the same amount of solar energy as an ordinary coloured coating, and when the temperature was above the switching temperature, the chameleon-type building coating could reflect more solar energy than the ordinary coloured coating. The above results showed that chameleon-type building coatings could contribute to a thermally comfortable building environment. The IR spectroscopy results showed that when the environmental temperature was below the switching temperature of 18°C, the lactone ring of the thermochromic pigment molecule would open and the band of C=O would almost disappear. Raman spectra indicated that the band of C–O in would move to the high wave number range. From ¹H NMR spectra, it could be found that there was some action between the hydrogen of the hydroxyl and the structure of . During the lactone ring opening, the electron in the non-bond orbital would transit to the higher orbital and it could elongate the conjugated bridge, which would produce visible absorption and hence produce an energy-absorbing effect. However, when the environmental temperature was above the switching temperature of 18°C, the lactone ring in the molecule of the thermochromic pigment would close, the transited electron would transit back to the original orbital, hence the visible absorption would disappear, which would make the coating have an energy-reflecting effect.