HPLC Elution Behavior of La-Fullerenes Investigated by Radiochemical Method

HPLC elution behaviors of La-fullerenes were investigated by use of the radiochemical methods. Elution curves of La-fullerenes could be observed in detail for the first time, and the persistent presence of La in the whole elution curve was demonstrated. Production of La-fullerenes containing a radioactive ¹⁴⁰La could be achieved for the first time.     

A unified analysis of resonant converters

The general method of analysis for resonant power converters is presented. This analytical method generalizes the idea of state-space-averaging technique to overcome the limitations of the conventional state-space-averaging method. As the result, the characteristics of resonant power converters are clarified so that transfer functions and stability conditions are revealed. In addition, a computer program of analysis based on the proposed method is developed. The program can be applied to various resonant power converters, even when they have parasitic losses and higher-order resonant circuits     

Titania NOx sensors for exhaust monitoring

Oxide semiconductors have been examined to develop NO_x sensors for exhaust monitoring. Titania doped with trivalent elements, such as Al³⁺, Sc³⁺, Ga³⁺ or In³⁺, has a good sensitivity and selectivity to NO between 450 and 550 °C, and shows rapid response. A sensor probe for monitoring exhaust NO_x has been fabricated. Many kinds of interference gases, such as C₃H₆, CO and SO₂, have been found to have only a slight influence on the sensor response to NO. The influence of O₂ and H₂O is also negligible, except for the cases of 0% H₂O and fuel-rich conditions. In accordance with these results, the sensor probe operates satisfactority in the exhaust gas of various combustion conditions without interference from the various kinds of gas species in the exhaust gases.     

Dietary effect of a symmetrical triacylglycerol, 1,3-biseicosapentaenoyl-2-γ-linolenoyl glycerol, on fatty acid composition of guinea pigs

The dietary effect of 1,3-biseicosapentaenoyl-2-γ-linolenoyl glycerol (STG) on the fatty acid composition of guinea pigs was examined and compared with that of an eicosapentaenoic acid ethyl ester (EPA-F) and of a soybean oil (SBO) diet. In terms of content of plasma lipid, EPA-E had a greater hypolipidemic effect than STG. On the other hand, in terms of EPA incorporation, contents of EPA in liver lipid were almost the same in the STG and EPA-E groups. Considering that the amount of EPA administered in the EPA-E group was almost 1.5 times that of the STG group, FPA may be absorbed more effectively as the glycerol ester than as the ethyl ester in guinea pigs. In all the tissue lipids, the STG group had a higher unsaturation index (UI) than the EPA-E group even though there is a lower UI in the STG diet than the EPA-E diet. These results suggest that greater amounts of desaturase products as a whole were synthesized in the STG group than in the other two groups. The dihomo-γ-linolenic acid/arachidonic acid (DGLA/AA) ratio in plasma total lipids in the STG group was 3.5 times that of SBO group, and the DGLA/AA ratio in the EPA-E group was half that of the SBO group. In liver lipid, the ratios of DGLA/AA and EPA/AA in the STG group were 0.687 and 0.488 (phosphatidylcholine fraction) and 0.237 and 0.752 (phosphatidylethanolamine fraction), respectively. The ratio of DGLA/AA as well as the high EPA/AA ratio obtained in the present study with the STG diet may lead to physiological alterations, including enhanced synthesis of 1-and 3-series eicosanoids.     

Oxidative thermal decomposition of poly(vinyl chloride) compositions

“Pure” poly(vinyl chloride) resin and four compositions containing poly(vinyl chloride) were subjected to oxidative thermal degradation in air at &400°C both in a quiescent and a flow system. The volatiles formed were identified and quantitatively determined on a gram-per-gram basis. Hydrogen chloride was the main product found. The nature and relative concentration of the produced organic chlorinated species appeared to be dependent not only on the poly(vinyl chloride) constituent but also on the other ingredients. All the compositions contained phthalate ester plasticizers. In the dynamic system, these distilled largely unchanged, whereas under static conditions transformation into phthalic anhydride occurred.     

Fracture toughness of silica particulate‐filled epoxy composite

The relationship between the postcuring conditions and fracture toughness on three silica particulate‐filled epoxy composites was investigated. The glass transition temperature, T_g, and the fragility parameter, m, derived from the thermo‐viscoelasticity, were used to characterize the composites, which were postcured under various conditions. The glass transition temperature and fragility both depended on both of the curing conditions and the volume fraction of silica particles. The glass transition temperature increased with the postcuring time and temperature, while the fragility generally decreased as the volume fraction increased. There was no direct correlation between the glass transition temperature and fragility. The fracture toughness depended on both the glass transition temperature and fragility. The composites with a high glass transition temperature and low fragility had high fracture toughness. These results indicate that the glass transition temperature and fragility are useful parameters for estimating the fracture toughness of the silica particulate‐filled epoxy composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2261–2265, 2002     

Increase in the γ-linolenic acid content by solvent winterization of fungal oil extracted fromMortierella genus

The fungal oil extracted fromMortierella ramanniana var.angulispora (IFO 8187) was solvent winterized in order to raise the content of γ-linolenic acid (GLA). Effects of winterization conditions (solvent, oil concentration in the solvent and temperature) and changes of glyceride compositions were discussed. The fungal oil was separated into four diglycerides and 17 triglycerides (TG) with high performance liquid chromatography. The predominant species were POO, POP and LOP, whose contents were 24.4, 22.9 and 9.4% of the total TG, respectively. Ethanol at 4°C gave the highest GLA content of 10.5% in spite of lower yield than with acetone at −20°C. The highest separation efficiency for GLA (η_GLA) was 0.27 with acetone at −20°C and 10% oil concentration, resulting in 8.3% of GLA from the fungal oil at 5.7% LGA. In case of lower oil concentration at 5–20%, η_GLA showed higher in the following order: acetone (−20°C)>n-hexane (−20°C)>acetone (4°C)>petroleum ether (−20°C). The winterization process also proved to be effective for the separation of TG type, Sa₂U (Sa; saturated fatty acid; U, unsaturated fatty acid) into the crystallized fraction and SaU₂ into the liquid fraction. Acetone at −20°C showed higher separation efficiency for triunsaturated TG than the other solvents.     

A pre-heating vaporization technology of coal-water-slurry for the gasification process

A pre-heating vaporization technology of coal water slurry, CWS, was developed to increase the efficiency of coal gasification with the reduction of oxygen consumption. A CWS pre-heating experimental unit having a capacity of 2.0 tons-coal/day was manufactured. After the CWS was heated to 573 K at about 10 MPa, water in CWS was continuously vaporized in a tube of which the diameter increased gradually (2–10 mm I.D.), and dry coal particles with steam were atomized and fed to a vessel. No aggregation of coal particles was observed in the atomized samples. The temperature and the pressure distributions of the fluid were calculated with empirical heat transfer and pressure drop correlations. The calculated results well corresponded to the experimental data measured in some test points. Using the calculation model, a large scale apparatus of 100 tons-coal/day was designed using KNO₃ + NaNO₂ + NaNO₃ molten salt as a heating medium.     

Anodic oxidation effects on pyrolytic graphite surfaces in acid

Anodic oxidation effects on the basal and edge surfaces of pyrolytic graphite in acid were studied by laser Raman spectroscopy, and by a gas-phase chemical modification method coupled with X-ray photoelectron spectroscopy. Surface covering fractions were also studied by -epichlorohydrin monolayer formation. It was found that the species of surface chemical groups added by anodic oxidation was closely related to the structure of the oxidized surface. In the case of the basal surface, carboxyl groups were added by anodic oxidation, being always accompanied by the destruction of its surface structure. On the other hand, in the case of the edge surface, hydroxyl groups were added without the destruction of its structure with a mild treatment. With more severe treatment, carboxyl groups were added and this addition was also accompanied by destruction of the surface structure. There was a range of treatment in which hydroxyl groups could be added without destroying the structure. Finally it was confirmed that both carboxyl and hydroxyl groups could make covalent bonds with epoxy groups of -epichlorohydrin.     

Effect of high temperature plastic strain with dynamic strain ageing on sensitization of type 304 stainless steel

The effect of plastic strain in the range 298 to 923 K on sensitization of type 304 stainless steel has been studied by means of electrochemical potentiokinetic reactivation (EPR) method and 10% oxalic acid etch (10% OAE) technique. The results are compared with those of isothermal sensitization heat treatment. The increase in degree of sensitization by plastic strain at 573 K was small. On the other hand, the sensitization by plastic strain at 723 K, was accelerated significantly, i.e. 20 times faster than the isothermal treatment, and that by plastic strain at 823 and 923 K was 6 times faster. It is shown that the dynamic strain ageing in range 450 to 570 K, which might be due to C or N diffusion, has a slight effect on sensitization, while the dynamic strain ageing in range 700 to 870 K, which might be due to Cr diffusion, accelerates the sensitization substantially.