Relationship between mechanisms and activities at the time of pedestrian injury and activity limitation among school adolescents in Kathmandu, Nepal

This study assessed the relationship between pedestrian activity at the time of injury, the type of vehicle involved and resulting activity limitation among school adolescents in the Kathmandu and Lalitpur districts of Nepal. A cross-sectional study of 1557 students in grades 6–8 across 14 schools was conducted using a self-administered questionnaire from August to September 2003. Twenty-three percent of adolescents reported pedestrian injuries, 38% were from urban and 21% from semi-urban areas. Adolescents were commonly injured by motorcycles and motor vehicles while crossing the road; however, while walking and playing, they were commonly injured by bicycles and motorcycles. Bicycles and motor vehicles were less likely to be involved in injury while crossing the roads and playing, respectively (p < 0.001). Activity was more likely to be limited for a longer period of time (>7 days) with injuries endured while crossing the road (p < 0.001). In urban areas, boys and girls were more likely to be injured while crossing the road and walking, respectively (p < 0.05), and both were commonly injured by motorcycles. In semi-urban areas, boys and girls were commonly injured while walking and were more likely to be injured by motorcycles and bicycles, respectively (p < 0.05). In both areas, more boys than girls were injured while playing. These findings have important implications for pedestrian safety interventions in poor countries.     

Control of colloidal behavior of polystyrene latex nanoparticles and their cytotoxicity toward yeast cells using water-soluble polymers

Positively charged polystyrene latex (PSL) nanoparticles (NPs) dispersed in physiological saline (154?mM NaCl solution) are taken up by yeast cells. However, in low ionic strength solutions, the yeast cells are covered with the NPs, leading to cell death. The environmental conditions under which NPs are taken up are therefore limited. In this study, we attempted to control the uptake of positively charged PSL NPs by Saccharomyces cerevisiae in 5?mM NaCl solution using a water-soluble polymer. Addition of a small amount of anionic sodium carboxymethylcellulose (CMC), which has a carboxyl group, to 5?mM NaCl solution allowed the uptake of PSL NPs by living yeast cells. In contrast, non-ionic methylcellulose did not affect the NP behavior. This is because the negatively charged CMC adhered to the positively charged PSL NP surfaces and the surface charge changed from positive to negative. Atomic force microscopy using a single-NP probe consisting of one NP immobilized on the flattened end of the silicon nitride tip showed that CMC significantly reduced the interaction force between a negatively charged living yeast cell and a positively charged PSL NP.     

Dominant stress region for crack initiation at interface edge of microdot on a substrate

In order to examine the mechanics of crack initiation at the free interface edge of a microcomponent on a substrate, delamination tests are carried out for two specimen shapes of Cr microdots on a SiO₂ substrate. The microdots of the first specimen are shaped like the frustum of a round cone. The Cr microdots are successfully delaminated from the SiO₂ substrate in a brittle manner and the critical load is measured by atomic force microscopy (AFM) with a lateral loading apparatus. Stress analysis reveals that a singular stress field exists near the interface edge and the strength for the crack initiation is governed by the intensified normal stress field. The critical stress intensity parameter is evaluated as K_σC ≈ 0.24 MPa m^0.39. Similar delamination tests are conducted for microdots shaped like the frustum of an oval cone. The stress distributions at the crack initiation of this specimen shape show a higher normal stress than the first specimen shape in the region near the interface edge of about x < 40 nm, while it is lower in the region of about x > 50 nm (x: distance from the edge). This suggests a limitation of conventional fracture mechanics: namely, the crack initiation in these specimens is not uniquely governed by the intensity of the singular field. It is found that the delamination crack is initiated when the averaged stress σ_ya in the region of 90-130 nm reaches 190-270 MPa, regardless of the specimen shape. This indicates that the dominant stress region of crack initiation is roughly estimated as 90-130 nm and the criterion is given in terms of the averaged stress in the region.     

Structural characterization of glycopeptides by N-terminal protein ladder sequencing

High-sensitivity and high-throughput mass spectrometry (MS) has become an important tool for characterizing glycopeptides. Here, we analyzed synthetic O-linked glycopeptides using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) MS. First, we applied MALDI-quadrupole ion trap (QIT)-TOF MS, which enables collision-induced dissociation-MSn analysis for fine structural characterization. Subsequent MS/MS of sodium adduct ions selected as precursor ions yielded detailed information about the site of oligosaccharide attachment as well as the carbohydrate and amino acid sequences; however, these MS/MS spectra were very complex. To obtain easily interpretable and simple spectra, we used N-terminal protein ladder sequencing coupled with MALDI-TOF MS. From the extremely simple resulting spectra, we were able to determine the glycosylation sites, amino acid sequences, and oligosaccharide molecular weights of the glycopeptides.     

Effects of electrolyte on the structure of pyrolytic graphite surfaces in anodic oxidation

Anodic oxidation effects on the structure of the basal and edge surfaces of pyrolytic graphite in alkaline electrolytes have been studied. Laser Raman spectroscopy, a gas-phase chemical modification method, coupled with X-ray photoelectron spectroscopy and secondary ion-mass spectroscopy techniques, were used. Anodic oxidation of the surfaces of pyrolytic graphite in alkaline electrolytes does not cause destruction of their surface structure, even at a higher level of treatment, unlike oxidation of acid electrolytes. In alkaline electrolytes, the number of hydroxyl groups added on the edge surface gradually increases with the increase in treatment level, whereas the number of carboxyl groups does not increase. It was found that anodic oxidation in alkaline electrolytes has a wider permitted range of treatment, in which hydroxyl groups can be added without destroying the edge surface structure, than that found in acid electrolytes. On the other hand, the number of hydroxyl groups added by treating with alkaline electrolytes is smaller than that with acid electrolytes. At a higher treatment level with acid electrolytes, oxidation occurs, even to a depth of 40 nm from the edge surface, whereas with alkaline electrolytes, oxidation occurs only at the surface. On the basis of these results, the effects of electrolytes on the adhesion between carbon fibres and epoxy resin matrix are discussed.     

Innovation in diamond

 This historical review of the progress of innovation in diamond research is discussed comparing it with the history of other materials. The innovation steps in current diamond technology are shaped by the fact that diamond is a functional material. This series of innovations was mainly brought about by the discovery of CVD methods of synthesizing diamond from the gas phase. Many kinds of expected applications have been proposed. Success in demonstrating diamond electronic devices has been achieved, and atomic scale observations on diamond growth are reported. Thus, even atomic scale control in synthesizing diamond looks quite realistic in the near future. Although such new data enhance the applications of diamond, most industrial applications of diamond still rely on its hardness. Innovation with diamond will be accelerated when a product using diamond as a functional material is used widely. Received: 2 January 1997 / Accepted: 27 March 1997     

High quality epitaxial ZnO films grown on solid-phase crystallized buffer layers

High quality epitaxial ZnO films on sapphire (110) plane have been fabricated on ZnO homo-buffer layers crystallized via solid-phase epitaxially (SPE). The SPE-ZnO films are fabricated by annealing of amorphous ZnON (a-ZnON) films deposited by RF magnetron sputtering. During annealing, the a-ZnON films are oxidized and converted to ZnO crystal. X-ray diffraction (XRD) analysis shows that the resultant films are epitaxially grown on the sapphire substrates. By using the SPE-ZnO films as homo-buffer layers, the ZnO films with high crystallinity, which are deposited by RF magnetron sputtering, are fabricated. The full width at half-maximum of XRD patterns for 2θ-ω and ω scan of (002) plane are 0.094° and 0.12°, respectively, being significantly small compared with 0.24° and 0.55° for the films without buffer layers. Thus utilizing SPE buffer layers is very promising to obtain epitaxial ZnO films with high crystallinity.     

A 63-year-old man with progressive cauda equina/conus medullaris syndrome

BACKGROUND: This article presents results of the acute treatment phase of a 2-site study comparing cognitive behavioral group therapy (CBGT) and treatment with the monoamine oxidase inhibitor phenelzine sulfate for social phobia. METHODS: One hundred thirty-three patients from 2 sites received 12 weeks of CBGT, phenelzine therapy, pill placebo administration, or educational-supportive group therapy (an attention-placebo treatment of equal credibility to CBGT). The "allegiance effect," ie, the tendency for treatments to seem most efficacious in settings of similar theoretical orientation and less efficacious in theoretically divergent settings, was also examined by comparing responses to the treatment conditions at both sites: 1 known for pharmacological treatment of anxiety disorders and the other for cognitive behavioral treatment. RESULTs: After 12 weeks, phenelzine therapy and CBGT led to superior response rates and greater change on dimensional measures than did either control condition. However, response to phenelzine therapy was more evident after 6 weeks, and phenelzine therapy was also superior to CBGT after 12 weeks on some measures. There were few differences between sites, suggesting that these treatments can be efficacious at facilities with differing theoretical allegiances. CONCLUSIONS: After 12 weeks, both phenelzine therapy and CBGT were associated with marked positive response. Although phenelzine therapy was superior to CBGT on some measures, both were more efficacious than the control conditions. More extended cognitive behavioral treatment and the combination of modalities may enhance treatment effect.