An energetic approach to the analysis of anisotropic hyperelastic materials

We demonstrate that for the class of anisotropic hyperelastic materials with stiffening behaviour (i.e., the stiffness increases for increasing strain), it is possible to find an approximation by means of the linear superposition of an anisotropic quadratic potential, generated by the true linear elasticity tensor of the target material, and a suitable correction potential that is isotropic and hyperelastic. The proposed method can be implemented into commercially available Finite Element software by use of featured options only. This approach is intended to provide the solution to a stress-strain problem, based entirely on energetic considerations, which ensures the convexity of the potentials, and provides a simple material characterisation procedure.     

Transient and steady state crack growth kinetics for stress corrosion cracking of a cold worked 316L stainless steel in oxygenated pure water at different temperatures

The stress corrosion cracking (SCC) growth kinetics for a cold worked 316L stainless steel was continuously monitored in high purity water at different temperatures and dissolved oxygen (DO) levels under a K (or K_max) of 30 MPa m^0.5. The total SCC test time was more than 8000 h to make sure the steady state crack growth rate under each test condition could be reached. Crack growth rate (CGR) increases with increasing temperature in the range 110-288 °C. A typical intergranular-cracking mode is identified. Depending on the previous test condition, especially the temperature, three kinds of crack growth kinetics, i.e., increasing with testing time then becoming steady, being constant during the whole period, or decreasing with test time then becoming steady, are identified and discussed. Time-dependent and testing history-dependent crack growth modes were confirmed in two series of tests in 2 ppm DO and 7.5 ppm DO pure water. The apparent activation energies are calculated and compared with other data in different environments under different applied loading levels for understanding the cracking mechanism.     

60 GHz band 64 QAM/OFDM terrestrial digital broadcasting signaltransmission by using millimeter-wave self-heterodyne system

This paper describes the first time experimental studies on 60-GHz band transmissions of terrestrial digital broadcasting signals (ISDB-T) with 64-QAM modulations on coded orthogonal frequency division multiplexing (COFDM) format. It has been a very difficult experiment to accomplish because it requires very stable and low phase-noise oscillators in the millimeter-wave band. The use of our proposed millimeter-wave self-heterodyne system, overcame this problem without using a stable oscillator, and provided a bit error rate (BER) of less than 10^-6 without any forward error correction. We also discuss the relationship between the carrier-to-noise power ratio and the BER obtained, and demonstrate that the penalty of the required CNR for our experimental system is less than 1 dB compared to the results of a back-to-back BER test     

Decomposition and regeneration of methane in the absence and the presence of a hydrogen-absorbing alloy CaNi5

Suitable catalysts for the decomposition of methane into carbon and hydrogen and for the regeneration of methane by hydrogenation of the carbon have been looked for in a series of transition metals and precious metals supported on various carriers. The most active catalyst for both reactions was Ni/SiO₂. The carbon formed on this catalyst was thermodynamically less stable than graphite. The different rate equations for the decomposition of methane obtained for the fresh and carbon deposited Ni/SiO₂ suggest that the rate-determining steps are different for the two catalysts. The highest number of carbon atoms deposited per one Ni atom was 31 at 773 K. However, the number of methane molecules recovered easily at 773 K was limited to 1.5 per Ni atom.

A physical mixture of Ni/SiO₂ and CaNi₅, a hydrogen-absorbing alloy, enhanced the decomposition rate of methane, enabling the complete conversion of methane at 773 K beyond the thermodynamic limitation. The presence of CaNi₅ at 273 K separated from the catalyst in a reaction system further enhanced the decomposition of methane due to an increased hydrogen-absorbing capacity of the CaNi₅ at low temperatures. The carbon deposited on Ni/SiO₂ in this case was reactive to be hydrogenated back to methane at 773 K, giving an average 7.5 CH₄ molecules per one Ni atom.     

Structure and gas permeation properties of asymmetric polyimide membranes made by dry–wet phase inversion: Influence of the polyimide molecular weight

In this article, we report the influence of the polyimide molecular weight (1.2 × 10⁵, 2.6 × 10⁵, and 4.1 × 10⁵) on the structure and the gas permeation properties of asymmetric polyimide membranes made by the dry–wet phase‐inversion process. The apparent skin layer thickness of the asymmetric membrane increased with increasing molecular weight, and the thicknesses of the membranes prepared from the three polyimides with a casting polymer solution containing 8.0 wt % butanol were 132, 350, and 739 nm, respectively. That is, the gas permeance in the asymmetric membranes increased with decreasing molecular weight. In contrast, the gas selectivity of the asymmetric membranes did not depend on the skin layer thickness. The solvent evaporation in the dry phase‐inversion process and the nonsolvent diffusion in the dry process were important factors that determined the formation of the asymmetric membrane. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Microscopical studies of the tissue structure of konjac tubers

The tissue structures of 2-year-old konjac tubers were investigated using a variable pressure scanning electron microscope equipped with an energy-dispersive X-ray spectrometer and an optical microscope. Konjac mannan (KM) cells are distributed all over the tuber and the spaces between the KM cells are filled with parenchyma. The KM cells are covered with scale-like cell walls and the size of the cells varies from 160 to 650 μm. Other kinds of particles with different sizes are observed in the honeycombed cells around the KM cells. The small grains relate to protein granules and the spherical particles (~12 μm in diameter), which are composed of small granules (1–3 μm in diameter), are starch. The tuber also contains potassium and calcium in the parenchyma. Most calcium is found in the needle-like crystals in the form of calcium oxalate. Such crystals are also found in 1 year and seed tubers.     

Purification and some properties of cholesterol oxidase stable in detergents from gamma-proteobacterium Y-134

Cholesterol oxidase (CHO) with high stability in detergents was found from an isolated strain, Y-134, belonging to the gamma-subclass of Proteobacteria. CHO production reached its maximum by incubation at 30 degrees C for 12 d. It was purified from cell-free extract prepared by mixing the cells with 0.4% Triton X-100. The absorption spectrum of the purified enzyme exhibited maxima at 274 and 410 nm, and a shoulder at 330 nm. The molecular mass was 115 kDa with two identical subunits of 58 kDa. The enzyme oxidized cholest-5-en-3beta-ol (cholesterol) and 5alpha-cholestan-3beta-ol (dihydrocholesterol) at a high reaction rate, and the K(m) value for cholesterol was 65 microM. The stability of the enzyme was higher than other CHOs in nonionic detergents with high values of hydrophilelipophile balance (HLB) such as Triton X-450 and sodium cholate. NH2-terminal sequence analysis showed a high similarity to CHO from Burkholderia cepacia, but not to CHOs from Streptomyces or Brevibacterium.     

Possible debonding mode of coated film under thermal loading

Deformation modes in thin films are discussed in order to evaluate the possible debonding mechanism. A combined simulation technique is employed in order to evaluate the thermo-mechanical response of a thin film layer attached to a substrate. A thermo-elasto-plastic finite element analysis is carried out on a jointed system, while only the film layer is picked up and both the deformation and eigen-mode analyses are implemented with reference to the data obtained in the former analysis. This approach enables us to capture the mechanical stiffness of the thin film layer. The effects of crystal morphology of substrate are discussed in terms of the interfacial force and the out-of-plane deformation of the thin film.     

Video based estimation of pedestrian walking direction for pedestrian protection system

Pedestrian protection has played an important role for driver assistance systems. Our aim is to develop a video based driver assistance system for the detection of the potentially dangerous situation between the vehicle and pedestrian, in order to warn the driver. In this paper, we address the problem of detecting pedestrian in real-world scenes and estimation of the walking direction with a single camera from a moving vehicle. Considering all the available cues for predicting the possibility of collision is very important. The direction in which the pedestrian is facing is one of the most important cues predicting where the pedestrian may move in the future. So we first address the problem of single-frame pedestrian orientation estimation in real-world scenes. Then again, we estimate the pedestrian walking direction using multi-frame based on the result of single-frame orientation estimation. We propose a three-step method: pedestrian detection for single-frame step, orientation estimation for single-frame step and walking direction estimation for multi-frame step. To evaluate the proposed method in its robustness and accuracy, the experiments have been performed between numbers of images which is highly challenging uncontrolled conditions in real world. It shows a significant performance improvement in octant orientation estimation of about 64% accuracy in the orientation estimation step and achieved surprisingly good accuracy in estimating the walking direction against 212 targeted objects.     

Absorption and Fluorescence Spectra of Nitrobenzanthrones

To identify nitrobenzanthrones (NBAs) such as 3-nitro-7 H -benz[ de ]anthracene-7-one (3-NBA) on the basis of their electronic spectral data, we have synthesized 1-, 2-, 3-, 9-, and 10-NBAs and measured their absorption and emission spectra. The first strong absorption band of the NBAs appeared in the region 350-440 nm; the band of 10-NBA was red-shifted by about 20 nm. The molar absorptivities of 3- and 9-NBA were about two times as large as those of the others. The fluorescence spectra of the NBAs varied more largely with the position of the nitro group compared to the absorption spectra. The quantum yields of fluorescence were very small, ranging from ～10 m 2 for 2- and 10-NBA to ～10 m 4 for 1- and 3-NBA. 3-NBA exhibited a characteristic spectrum with two broad bands at 450 and 530 nm. On excitation causing an n ~ * transition in the NBAs, their fluorescence intensities increased by a factor of 10. Phosphorescence was observed at 77 K for all compounds though that of 1-NBA was very weak. These results give the promise of characterizing individual isomers of NBAs on the basis of their spectroscopic data.