Guiding and blocking of highly charged ions through a single glass capillary

Highly charged ions produced in an electron beam ion trap, I^q+, q = 10-50, were transmitted through a tapered glass capillary having diameter of at the end. We found that for a particular beam current, there exists an optimum tilting angle of the capillary in which a steady output of ions is observed, while for smaller angles, the ion counts first rise, then gradually decay on a time scale of minutes. In the case of steady transmission, the charge state distribution is found to be slightly towards the lower side.     

Examination of pin-by-pin fission rate distribution in large geometry evaluated by the Monte-Carlo method

Accuracy and reliability of pin-by-pin fission rate distribution in large geometries calculated by the multi-group Monte-Carlo method is examined through comparison with a deterministic transport code based on the method of characteristics. Various calculation geometries from a single assembly to a PWR full core are used for comparison of pin-by-pin fission rate distribution. An integral parameter, i.e., k-effective, can be accurately calculated by the Monte-Carlo method with a practical number of neutron histories (10⁶–10⁷) regardless of the size of the calculation geometry. On the other hand, comparison with the deterministic calculation shows that the estimated statistical errors for pin-by-pin fission rate distribution obtained by a Monte-Carlo calculation are somewhat underestimated in a large geometry, e.g., a PWR full core, under the present calculation conditions. Such underestimation of the statistical uncertainty of a local parameter should be carefully considered when the Monte-Carlo method is used as a reference tool for verification of a deterministic code, especially in large geometries.     

Comparison of RRR-α- and all-rac-α-tocopherol uptake by permanent rat skeletal muscle myoblasts (L6 cells): Effects of exogenous lipoprotein lipase

The purpose of the present investigation was to test whether permanent skeletal muscle cells (rat L6 cells) could serve as an in vitro model for α-tocopherol (αTocH) biodiscrimination studies. L6 cells were incubated in the presence of high density lipoprotein (HDL), low density lipoprotein (LDL), and very low density lipoprotein (VLDL) labeled in the lipid moiety with either all-rac-or RRR-[¹⁴C]αTocH. These incubations were performed either in the absence or in the presence of exogenously added bovine lipoprotein lipase (LPL) since skeletal muscle is one of the major expression sites of LPL in vivo. Time-dependent uptake studies (up to 24 h) in the absence of LPL have shown that equipotent doses of all-rac- and RRR-[¹⁴C]αTocH (1.36∶1) led to almost identical accumulation of the tracer, independent of the lipoprotein class used as αTocH carrier. With regard to αTocH donor capacity, it appeared that HDL is the most potent αTocH donor, followed by LDL and VLDL. In the presence of LPL, all-rac- and RRR-[¹⁴C]αTocH uptake was significantly enhanced (between two- and tenfold). Biodiscrimination studies using chiral high-performance liquid chromatographic analysis with radiometric detection of the corresponding methyl ether derivatives on a Chiralcel OD column have demonstrated that the 2S-and 2R-isomers of αTocH were taken up in a 1∶1 ratio by L6 cells independent of the absence or presence of LPL. In addition, we have not observed biodiscrimination between the four 2R-isomers, i.e., there was no preferential accumulation of the RRR-isomer. These data suggest that L6 cells do not discriminate between different αTocH isomers and that the addition of endogenous LPL significantly enhances the uptake of RRR- and all-rac-αTocH.     

Detection and Quantitation of Left-to-Right Shunts from Radionuclide Angiocardiography Using the Homomorphic Deconvolution Technique

The homomorphic filtering method is described for the detection and quantitation of left-to-right shunts from radionuclide angiocardiography. First, the method is investigated theoreticatly and numerically using a realistic model with systemic recirculation. It is demonstrated that even in a noisy situation the shunt flow fraction can be relatively well estimated, if only the characteristics of the fiters used are suitable. Second, the method is applied to real data, i.e., the pulmonary time-activity curves from radionucUde anglocardiography. The presence or absence of a left-to-right shunt is determined using the ratio AT/MTT. The pulmonary-to-systemic flow ratios calculated from the areas of the two decomposed curves are compared with those from oximetry at cardiac catheterization. Good agreement between the Qp/Qs ratios calculated by oximetry and radionucUide angiocardiography is obtained.     

Effect of annealing conditions on the uniformity of undoped Semi-Insulating InP

Recently, it was found that undoped semi-insulating InP can be obtained by highpressure annealing of high purity materials. The reproducibility and the uniformity was, however, not satisfactory. In the present work, we found that not only Fe concentrations but also Cr and Ni concentrations in annealed wafers were slightly increased during annealing. Since it seems that the origin of the contamination was due to the vapor source of red phosphorus, conductive InP with a trace amount of Fe was annealed under low phosphorus vapor pressure in order to reduce the contamination. By preventing the contamination of Cr and Ni, preparation of semi-insulating InP became highly reproducible. The minimum Fe concentration for realizing semi-insulating InP was found to be 1 x 10¹⁵cm⁻³. It was also found that the better resistivity uniformity can be obtained at higher annealing temperatures.     

Normal Spectral Emissivity Measurement of Molten Cu–Co Alloy Using an Electromagnetic Levitator Superimposed with a Static Magnetic Field

The normal spectral emissivity of molten Cu–Co alloy with different compositions was measured in the wavelength range of 780 nm to 920 nm and in the temperature range of 1430 K to 1770 K including the undercooled condition by an electromagnetic levitator superimposed with a static magnetic field. The emissivity was determined as the ratio of the radiance from a levitated molten Cu–Co droplet measured by a spectrometer to the radiance from a blackbody calculated by Planck’s law at a given temperature, where a static magnetic field of 2.5 T to 4.5 T was applied to the levitated droplet to suppress the surface oscillation and translational motion of the sample. We found little temperature dependence of the normal spectral emissivity of molten Cu–Co alloy. Concerning the composition dependence, the emissivity decreased markedly above 80 at%Cu and reached that of pure Cu, although its dependence was low between 20 at%Cu and 80 at%Cu. In addition, this composition dependence of the emissivity of molten Cu–Co alloy can be explained well by the Drude free-electron model.     

The Power Function,of the Exact Test for the 2 × 3 Contingency Table

In continuation of the authors' tables of significance tests (1963), the power function of this exact test for the 2 × 3 contingency table using the Freeman & Halton principle is derived and evaluated numerically in the form of contours of constant power for the cases: A = 5(5) 15, where A is the total number in each of the three groups observed according to the numbers of ‘Successes’ (= a _i ) in each. Comparisons are also made with the exact significance points of the competing X ² and (?2 log λ) tests under the null hypothesis H ₀ and also alternatives to H ₀.     

Multi-class grasping classifiers using EEG data and a common spatial pattern filter

This paper describes the classification of various human actions from brain activity. In particular, we focus on grasping movements and estimate grasping patterns from electroencephalogram (EEG) data. EEG data is converted to grasping features by using a common spatial pattern filter (CSP filter), and the features are subsequently classified into grasping categories by using the k-nearest neighbor method. We tested the pipeline of feature extraction and classification on the EEG dataset. The EEG data were acquired while participants grasped an object according to the Cutkosky’s grasping taxonomy, in which grasping movements are categorized into nine power-type grasping patterns and seven precision-type grasping patterns. The best classification rate for 9-class power-type grasping patterns was 48% and for 7-class precision-type grasping patterns was 40%.