Towards the Development of a New Iron Age

Steel in its various forms is the most widely utilized metallic alloy and comprises over 80 % by weight of all metallic alloys in industrial use.^[1] The development of steel microstructures is based on manipulation of a very specific solid/solid state transformation called an eutectoid transformation (i.e. γ_austenite → α_ferrite+ Fe₃C_cementite). The control of this transformation is the primary factor resulting in wide variety of microstructures and resulting properties found in commercial steel alloys. However, the full benefit of its main constituent, iron has never been realized. Based on the metallic bonding in iron, the theoretical tensile strength has been calculated to be 13.2 GPa but ultra high strength steels, even today, only achieve maximum tensile strength levels from 1 to 1.5 GPa. Thus, our modern technological society has been established utilizing approximately only ～ 10 % strength level of iron. Here we demonstrate that a high level of strength (6.2 GPa) and strength to weight ratio of 8.3 × 10⁴/m³ may be obtained in iron‐based alloys by their solidification into metallic glasses, as well as, by employing another solid state transformation called glass devitrification.     

Catalytic oxidation of carbon monoxide over radiolytically prepared Pt nanoparticles supported on glass

Platinum nanoparticles have been prepared by radiolytic and chemical methods in the presence of stabilizer gelatin and SiO₂ nanoparticles. The formation of Pt nanoparticles was confirmed using UV-vis absorption spectroscopy and transmission electron microscopy (TEM). The prepared particles were coated on the inner walls of the tubular pyrex reactor and tested for their catalytic activity for oxidation of CO. It was observed that Pt nanoparticles prepared in the presence of a stabilizer (gelatin) showed a higher tendency to adhere to the inner walls of the pyrex reactor as compared to that prepared in the presence of silica nanoparticles. The catalyst was found to be active at ≥150 °C giving CO₂. Chemically reduced Pt nanoparticles stabilized on silica nanoparticles gave ∼7% CO conversion per hour. However, radiolytically prepared Pt nanoparticles stabilized by gelatin gave ∼10% conversion per hour. Catalytic activity of radiolytically prepared platinum catalyst, coated on the inner walls of the reactor, was evaluated as a function of CO concentration and reaction temperature. The rate of reaction increased with increase in reaction temperature and the activation energy for the reaction was found to be ∼108.8 kJ mol⁻¹. The rate of CO₂ formation was almost constant (∼1.5 × 10⁻⁴ mol dm⁻³ h⁻¹) at constant O₂ concentration (6.5 × 10⁻³ mol dm⁻³) with increase in CO concentration from 2 × 10⁻⁴ mol dm⁻³ to 3.25 × 10⁻³ mol dm⁻³. The data indicate that catalytic oxidation of CO takes place by Eley-Rideal mechanism.     

Pervasive computing: a paradigm for the 21st century

Pervasive computing promises to make life simpler via digital environments that sense, adapt, and respond to human needs. Yet we still view computers as machines that run programs in a virtual environment. Pervasive computing presumes a different vision. A device can be a portal into an application-data space, not just a repository of custom software a user must manage. An application is a means by which a user performs a task, not software written to exploit a device's capabilities. And a computing environment is an information-enhanced physical space, not a virtual environment that exists to store and run software. Pervasive computing is close to technical and economic viability.     

A software platform for testing intrusion detection systems

Intrusion detection systems monitor system activities to identify unauthorized use, misuse, or abuse. IDSs offer a defense when your system's vulnerabilities are exploited and do so without requiring you to replace expensive equipment. The steady growth in research on intrusion detection systems has created a demand for tools and methods to test their effectiveness. The authors have developed a software platform that both simulates intrusions and supports their systematic methodology for IDS testing     

Classifying and detecting anomalies in hybrid knowledge-based systems

The increasing need for hybrid Knowledge-Based Systems (KBS) that accommodate more complex applications has led to the need for new verification concerns that are more specific to the hybrid representation using objects and rule-based inference. Traditionally, verification of expert systems has focused solely on rule-based inference systems. Hybrid KBSs present additional verification problems not found in traditional rule-based systems. This paper is an investigation into the anomalies that may be present in a hybrid representation that warrant detection for the verification of the KBS. Many anomalies are due to the interaction of the component parts of the hybrid KBS. For example, subsumption anomalies arise due to an interaction between inheritance of objects and rule-based inference. In this paper, we extend the context of subsumption anomalies and introduce additional types of anomalies that may be present in the KBS. The goal of this research is to make hybrid KBSs more reliable by detecting such anomalies.     

Liquid convection effects on the pushing-engulfment transition of insoluble particles by a solidifying interface: Part I. Analytical calculation of the lift forces

During the solidification of a liquid containing insoluble particles, the particles can be instantaneously engulfed, or continuously pushed, or pushed and subsequently engulfed. A critical velocity for the pushing-engulfment transition is observed experimentally. Most models proposed to date ignore the complications arising from the liquid convection ahead of the solid-liquid interface. They simply solve the balance between the attractive drag force exercised by the liquid on the particle and the repulsive interfacial force. This work is an effort to calculate analytically the lift forces (Saffman and Magnus forces) under certain assumptions regarding the nature of fluid flow ahead of the solid/liquid interface. This makes possible the quantitative evaluation of the three experimentally observed regimes occurring during particle-interface interaction: (1) at low convection—no effect on the critical velocity for the particle engulfment transition; (2) at intermediate convection—increased critical velocity; (3) at high convection—no particle-interface interaction. The model was applied to evaluate the gravity level required for microgravity experimental work on particle pushing where the effect of liquid convection during solidification is negligible. This is necessary to validate existing theoretical models that do not take into account fluid flow parallel to the solidification interface.     

Pinch Roller Failure Analysis and Resulting Enhancement of Rebar Mechanical Properties

Reinforcing bars, popularly termed “rebars,” are used to impart tensile strength to concrete structures. Concrete has high resistance to weathering and fire and high compressive strength but almost no tensile strength, hence rebars are used to provide the latter to concrete. Property consistency along the length of rebars is an important prerequisite. When the finished product is subjected to thermomechanical treatment (TMT), proper control of rolling and water box parameters and efficient pinch rolling are needed to achieve acceptable properties. Variation of yield strength (YS) along TMT bars from the front to back end has been observed within the same heat treatment. In the presented investigation, it was observed that pinch rolling ineffectiveness is the main reason for the poor mechanical properties at the back end. The pinch roller was unable to support the back end of the TMT bars properly to maintain the speed and tension of the bars, resulting in nonuniform cooling of the back end through the water box and subsequent mechanical property failure. Due to the substandard material of the pinch roller, it was unable to hold the back end of the bar properly. Based on analysis of the roller it was concluded that it failed due to improper microstructure, resulting in inadequate hardness and toughness for the stringent operating conditions. AISI H13 is a better material to use in such high-service-temperature conditions. Moreover, proper heat treatment is needed to achieve adequate hardness and microstructure properties. After proper heat treatment of pinch rollers, their service life was increased twofold, minimizing the YS variation along the rebars.     

Cytochrome P450 inhibitory potential of selected Indian spices — possible food drug interaction

Spices constitute an important group of food which is virtually indispensable in the culinary art. In a view, these spices feared to pose a probability to affect the disposition of conventional pharmaceuticals through inhibition of human cytochrome P450 (CYPs) enzymes. In the present study an approach has been made to evaluate the possible CYP inhibition potential with some Indian spices (Capsicum annuum, Murraya koenigii, Zingiber officinale) and their major bioactive compounds, in combination with pooled microsome; as well as commercially available recombinant human CYP3A4, CYP2D6, CYP2C9 and CYP1A2. Quantification of the bioactive compound was determined through RP-HPLC, in order to standardize the plant material. CYP–carbon monoxide (CYP–CO) complex assay result indicated that all the plants and their bioactive compounds have an interaction potential with CYPs. Fluoregenic assay results indicated that the spice extracts have higher inhibition potential comparing to their single bioactive molecule. The higher enzyme inhibition potential by the extracts may be related to the synergistic effects due to the presence of other constituents in the extract. Capsaicin and C. annuum showed the lowest IC₅₀ value and 6-gingerol and Z. officinale extract showed the highest IC₅₀ value among the entire sample tested. The entire sample showed significantly less (P < 0.001, P < 0.01) interaction potential than known inhibitors. These findings indicate that selected spices are unlikely to cause clinically relevant drug interactions involving the inhibition of major CYP isozymes.     

Samarium Ion-Doped Maghemite Nanoparticles: Synthesis,Microstructural, Optical,and Magnetic Characterizations

Journal of Superconductivity and Novel Magnetism - This paper reports the effects of rare-earth Sm3+ ion substitution on structural, optical, electronic, and magnetic responses of maghemite...     

An adaptive penalty function-based maximin desirability index for close tolerance multiple-response optimization problems

Simultaneous optimization of multiple-quality characteristics and determining the process settings is a critical and difficult task for practitioners. Such types of problems are generally referred to as “multiple-response optimization” problems. To handle high-dimensional multiple-response problems, a popular strategy, using desirability functions, is recommended by various researchers. Various types of desirability index functions are recommended to convert multiple scale-free desirability measures to a single composite desirability (or single objective) value. Thus, the objective is then to maximize the single composite desirability for a specific problem. In this paper, a new adaptive penalty function-based “maximin” desirability index is proposed, which provide superior solution as compared to existing maximin approach, for close (or tight) engineering tolerances of response characteristics. The superiority was proved based on statistical comparison using varied case situations and different swarm intelligent search strategies.