地热、温泉水利用中氡的防护

地热作为一种比较经济、方便的新能源的同时,也给公众和环境带来辐射影响。本文介绍了地热和温泉水中~(222)Rn 的放射性水平及其对人体健康的影响,对地热、温泉水利用中氡的防护措施提出了一些建议。     

秦山核电厂气载放射性释放的环境影响

本文评价了秦山核电厂气载放射性流出物对环境的影响。应用现场及风洞大气扩释实验结果和厂址周围的人口与食谱调查资料,估算了秦山核电厂在正常运行和事故条件下释放的气载放射性流出物对公众产生的个人有效剂量当量和集体有效剂量当量。计算结果表明,正常运行时厂址边界(0.5km)处的最大个人有效剂量当量为2.7×10~(-2)mSv/a,该剂量的大部分来自~(137)Cs 的食入(主要由地表湿沉积引起);80km 范围内的集体有效剂量当量为1.1人·Sv/a,归一化集体有效剂量当量为3.7人·Sv/GW(e)·a。文中还给出了事故情况下剂量估算结果。     

北京谱仪端盖簇射计数器工作气体的研究

为使北京谱仪端盖族射计数器更好地工作在自猝灭流光ＳＱＳ模式下，提高其能量分辨以及线性等指标，用Ａｒ，ＣＯ２，Ｌｓｏｂｕｔａｎｅ三元工作气体对探测器的工作性能进行了仔细研究，找出了一适合于主雇地数器的工作气体，此外，还研究了异丁的纯度对探测器性能的影响。     

Kinetics of sol-to-gel transition for poloxamer polyols

Kinetics of gelation for aqueous solutions of poloxamers 407 and 288 were determined using pulse shearometry. The principle of this method for determining the shear modulus of a semisolid was based on generation of a torsional force that is transmitted through the poloxamer sample at discrete time intervals. Three distinct linear phases were observed for the log dynamic shear modulus (G′) vs. time profiles as poloxamer 407 and 288 solutions of varying concentrations were allowed to passively warm at room temperature to a temperature exceeding the sol-to-gel transition temperature, T_m. The beginning of the second exponential phase coincided with the onset of the gelation process as determined by visual observation. Although gelation appeared visually to be complete at the beginning of the third exponential phase of the log G′ vs. time profiles, this last exponential phase may indicate the rate of formation of the polymer network. A comparison of poloxamer 407 [30% (w/w); T_m = 10.9°C] and poloxamer 288 [37% (w/w); T_m = 11.1°C] would suggest that the concentration of poloxamer required to achieve approximately the same gelation temperature for poloxamers having a similar ratio of poly(oxypropylene):poly(oxyethylene) units decreases with increasing molecular weight of the poly(oxypropylene) hydrophobe contained in the copolymer. Results of these preliminary studies suggest that the gelation process was significantly (p < .05) more rapid for poloxamer 407 at a 30% (w/w) concentration compared to a 30% (w/w) solution of poloxamer 288 when the poloxamer solutions were allowed to passively warm at room temperature. In addition, it appears that the rate of gelation for the poloxamer solutions studied was dependent on the rate of heat transfer through the polymer solution.     

An experimentally verified hybrid Cassie-Mayr electric arc modelfor power electronics simulations

This paper presents an electric arc model that can approximately represent both the static and dynamic characteristics of an arc load controlled by a power electronic circuit. The proposed model was developed from the combination and modifications of the classical Cassie and Mayr equations. The model equations have been expressed in a form suitable for incorporation into circuit simulators employing the nodal analysis method of equation solving. The model has been test-implemented in the Saber circuit simulator. Simulated and experimental results appear to be in good agreement     

IEEE standard 802.16: a technical overview of theWirelessMANTM air interface for broadband wirelessaccess

The broadband wireless access industry, which provides high-rate network connections to stationary sites, has matured to the point at which it now has a standard for second-generation wireless metropolitan area networks. The IEEE standard 802.16, with its WirelessMAN^TM air interface, sets the stage for widespread and effective deployments worldwide. This article overviews the technical medium access control and physical layer features of this new standard     

Adaptive predictive control algorithm based on Laguerre Functional Model

Laguerre Functional Model has many advantages such as good approximation capability for the variances of system time‐delay, order and other structural parameters, low computational complexity, and the facility of online parameter identification, etc., so this model is suitable for complex industrial process control. A series of successful applications have been gained in linear and non‐linear predictive control fields by the control algorithm based on Laguerre Functional Model, however, former researchers have not systemically brought forward the theoretical analyses of the stability, robustness, and steady‐state performance of this algorithm, which are the keys to guarantee the feasibility of the control algorithm fundamentally. Aimed at this problem, we introduce the principles of the Incremental Mode Linear Laguerre Predictive Control (IMLLPC) algorithm, and then systemically propose the theoretical analyses and proofs of the stability and robustness of the algorithm, in addition, we also put forward the steady‐state performance analysis. At last, the control performances of this algorithm on two different physical industrial plants are presented in detail, and a number of experimental results validate the feasibility and superiority of IMLLPC algorithm. Copyright © 2005 John Wiley & Sons, Ltd.     

STUDY ON RESIDUES OF ~（14）C－FENITROTHION IN MODEL RICE－FISH ECOSYSTEM AND FIELD RICE－FISH ECOSYSTEM

ＳＴＵＤＹＯＮＲＥＳＩＤＵＥＳＯＦ~（１４）Ｃ－ＦＥＮＩＴＲＯＴＨＩＯＮＩＮＭＯＤＥＬＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＡＮＤＦＩＥＬＤＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＺｈａｎｇＺｈｏｎｇｌｉａｎｇ（张仲良）；ＷａｎｇＨｕａｘｉｎ（王化新）；Ｇ?..     

用于重离子核反应实验测量的纵向电场气体电离室

本文报道了一种新型的大动态范围，多叠层探测器系统组件之一的纵向电场气体电离室的构造，性能和在中能得离子核反应实验中的应用。     

Protocol design and performance analysis for manufacturing messagespecification: A Petri net approach

The manufacturing message specification (MMS) is the ISO standard communication protocol specific to manufacturing. To analyze MMS design and performance, service unit automats are introduced to represent individual MMS services, while service connection Petri Nets (PNs) are constructed from these automats to describe MMS service connections and processes. This approach makes MMS protocol specification and analysis possible in terms of well-developed concepts and methods in PN theory. It leads to a distributed and hierarchical model of MMS software system by integrating service connection PNs. A generalized stochastic PN for MMS performance evaluation is obtained by incorporating service parameters and time factors into the model. A technique based on T-invariants is used to simplify the performance analysis